Klimax DS / 1/Setup
Linn Setup Guide:
How to set up the Linn Klimax DS / 1
Contents
- 1 Product info
- 2 Initial Configuration
- 3 Back Panel connections
- 4 Front Panel Connections
- 5 Download App
- 6 Setup and changes
- 7 Space Optimisation
- 7.1 What is the difference between Space Optimisation & Space Optimisation+?
- 7.2 Is the Linn Account Manage systems only available for the new Linn DSM's
- 7.3 Why don't you use a Microphone in Space Optimisation?
- 7.4 Can I use "Linn Account Space Optimisation" with my Exakt system?
- 7.5 What are the differences between the Konfig Space Optimisation and Linn Account Space Optimisation?
- 8 General products manuals and information
- 9 Installation basics
- 10 FEATURES
- 11 FAQ's
Product info
| • Product Name: |
Klimax DS/1
|
| • Date of Introduction: | April 2011 - April 2015 |
| Replaced by Klimax DS (Exakt variant) in 2015
| |
| • Type: | Digital music player
|
Hardware Upgrades
Note: It should be noted that this upgrade information may at times be out of date and should not be used as a current list of what upgrades are available.
Initial Configuration
- Considerations before installation, make sure that you have
-
- A mains power socket
- Stable mains supply
- 100-120V rms 50~60Hz,
- 220-240V rms 50~60Hz
- a local LAN/Ethernet connection for this product
Installation notes
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
Back Panel connections
- MAINS INPUT - To connect to the mains electricity supply.
- POWER SWITCH- For switching the power to the unit on and off
- ETHERNET - To connect to a network (100Base-T)
- RS232 PORTS - For connection to Linn source products without ethernet ports.
- FALLBACK - To put the device into Fallback mode (used when reprogramming)
- EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
- UNBALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
- BALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.
Front Panel Connections
Download App
- Linn App
The Linn DS/DSM can be done from many control points at the same time.
- The name of this control App/software is Linn App
- Linn App control App is available for
- Apple iPhone/iPads.(IOS10 and above)
- Apple iPhone/iPads.(IOS10 and above)
- You can download the Apps from Apple iStore
- Linn App control App is available for
- Kazoo App
The Linn DS/DSM can be done from many control points at the same time.
- The name of this control App/software is KAZOO..
- Kazoo control App/software is available for
- Windows PC's,
- MAC computers,
- Android phones/tablets and
- Apple iPhone/iPads.
- You can download the Apps from: www.Linn.co.uk > Menu > The Linn control App - Kazoo
- Kazoo control App/software is available for
Setup and changes
There are two ways to configure, (if required), your Linn DS/DSM player/Speakers etc:
This Konfig App can be downloaded from KONFIG App
This will allow to change the Room name, Kiko name, input name and other settings. This can be changes by yourself and/or your Linn Retailer.
Details of most of the options are listed in the Konfig Manual, this covers a lot of options
This does not have as many features as the Konfig App, above, but will allow you to do most of your changes.
Before you do anything you will need to have a Linn Account. This is a simple process and can only be performed using the Kazoo App.
Details on how to create your Linn Account and how to use Manage systems can be found in the Manage Systems page.
Space Optimisation
 for ALL Linn DS/DSM products |
 Linn Account Space Optimisation from Davaar64 => |
 Linn Konfig Space Optimisation & Space Optimisation+ |
Linn Space Optimisation is currently configurable using either the Konfig app or the Linn Account Manage systems.
Click the above picture/icon for more information of that version of Space Optimisation.
More details of what Space Optimisation is can be found at www.Linn.co.uk
What is the difference between Space Optimisation & Space Optimisation+?
- Space Optimisation is for NON-Exakt systems. This uses the direct analogue outputs of the Linn DS/DSM
- Space Optimisation+ is for Exakt speaker. This is used for loudspeakers fed via the Exakt-link AND used with as a digital crossover. The "plus" is to signify the more detail that is capable within the Exakt system and Space Optimisation.
Is the Linn Account Manage systems only available for the new Linn DSM's
- Both Applications can be used for ALL Linn Products.
- The only limitation is that the Linn DS/DSM must have Davaar64 to run Linn Account Manage systems]
Why don't you use a Microphone in Space Optimisation?
- Check this link for more detail.
Can I use "Linn Account Space Optimisation" with my Exakt system?
- From November 2019 you can now use Linn Account Space Optimisation with Stereo and Surround Exakt systems.
What are the differences between the Konfig Space Optimisation and Linn Account Space Optimisation?
- The differences are explained HERE
General products manuals and information
Controlling the product User Guide
Product setup:Konfig user manual
Third Party Software Copyright
Installation basics
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
FEATURES
Tidal
- Tidal is supported in countries listed HERE on the Tidal website
Qobuz
- Qobuz Streaming CD or Hi-Res quality music
- Check for Qobuz FAQ's with LInn DS/DSM
Calm Radio
- Calm Radio "Music that helps you get through the day "
Spotify Connect
- Spotify Connect can now be used on Linn products using firmware Davaar59 (Aug 2017) or later firmware. (That is, if your Linn DS/DSM has had a software update after Aug 2017 then you can use Spotify connect)
- This allows you to select and Play your Spotify music on your Linn DS/DSM players and use the internal volume control on the Linn DS/DSM.
- To connect up your Spotify account to the Linn DS/DSM :
- On your control device, iPad/Android/PC/MAC etc, connect to the same computer network as you Linn DS/DSM
- Start your Spotify app, (if it is already open then close the App, wait a few seconds, and open the App)
- Now check the Spotify Speakers icon to find your Linn DS. (In some cases you may have to power cycle your Linn DS/DSM before this is seen)
- Select you Linn product and you can now play to the Linn DS/DSM from the Spotify account and control the Linn DS/DSM volume.
This is web controlled and if your Linn DS/DSM has already been paired with your Spotify account you will be able to control even if you are not on the same ethernet network.(So be careful that if you accidentally select the Linn DS/DSM as a Spotify speaker and put the volume up high and you are not at home)
- Check FAQ SpotifyConnect for more information.
Roon
The Linn DS/DSM IS a ROON CERTIFIED device
The Linn DS/DSM requires Davaar63 (May 2018) or later firmware to work with Roon V1.5 and above.(That is, if your Linn DS/DS/HUB has had a software update after May 2018 then you can use Roon)
The Linn DS/DSM is a "Roon Tested network player"
This allows full hi-res audio, (192k/24bit) playback controlled by the Roon system
Setup
On Linn DS proxy setups, Linn DS with Linn Kontrol preamplifer connected with RS232, the Roon volume control will not control the Linn Kontrol volume. This will only work with Linn DSM or Linn DS with internal volume control disabled.
A Roon HUB is required in your network system to allow Roon to control your Linn DS/DSM.
ENABLE the Linn DS/DSM player in the Roon - Settings - Audio - NETWORKED section.
In the Settings > Setup make sure that the Subnet of Linn Streaming is the same as the network that the Linn DS is on. Otherwise they will not show in the Audio
Control
Primary control is through Roon.
:Transport IR is disabled on the Linn DS/DSM when the Roon input is selected from Linn DS firmware release Davaar80 (Nov 2020)
Issues
Roon uses the Linn DS/DSM as a media player, the control interface IS Roon.
- • I cannot see any Linn DS in the Audio list...
-
- If you cannot see any Linn DS product in the Audio list then check that with the setup the correct Linn Streaming subnet (network address range).
- E.g. if you Linn DS has IP address 192.168.1.34 then its subnet is 192.168.1.0
- • I am only getting Airplay quality audio from the Linn DS using Roon
-
- In Roon Audio setup, you will have a similar setup with Roon tested devices with the ENABLE button:
- The Linn DS/DSM products have to be declared as "Roon Tested", Networked devices in the Roon Core settings. (The "AIRPLAY" option for the Linn DS/DSM must be disabled within the Roon Core).
- Click on the Roon Ready - Enable and give a name to the Linn DS/DSM. (In the example below this has been named Merlin Lounge)
- In Roon Audio setup, you will have a similar setup with Roon tested devices with the ENABLE button:
- • I press STOP and the Roon starts playing again...
-
- Transport (play / pause / stop) and Volume can be controlled using Kazoo or Ir handset. Although later versions of Roon will counteract these commands. Only use the Roon controller software to control what is playing.
- Linn DS Firware Davaar80 onwards will disable transport controls whilst on the Roon input of the LInn DS/DSM
- • If I select an external source whilst playing Roon, I need to reselect the source to get it Playing.
-
- This can be due to a confusion as the Roon will send a Stop command to the Linn DSM as you exit the Roon source. However, as the Linn DSM will probably have changed to this new source, then this new source is stopped by Roon. On external sources this can only be recovered by selecting another source and going back to originally selected source.
- The solution is to Stop or Pause the Roon source BEFORE you change to the a different input on the Selekt DSM.
Deezer
- This can now be used on Linn products using firmware Davaar82 (July 2021) or later firmware.
- To create and add Deezer tracks to a Linn DS/DSM playlist you require the Linn App
- This function is NOT available on the Kazoo or Kinsky Apps
- The Deezer is broadcast from the Internet straight to the Linn DS/DSM and you use the Linn App to select and play the Music on the Linn DS/DSM.
AIRPLAY
- AirPlay is a Apple protocol that allows wireless streaming media.
- The Linn DS/DSM/HUB can take the audio stream via the "Netlink" input.
- Check <HERE> for any issues with Airplay
FAQ's
Check:
