DS Control Options

From LinnDocs
Revision as of 10:49, 8 November 2018 by Yoda (talk | contribs) (PINS)
Jump to: navigation, search


IR Handsets

REM 018

Basic Linn DS operation using the Linn REM 019 remote control handset
REM020

Using the Linn REM 020 remote control handset
REM022

Using the Linn REM 022 remote control handset with PINS




PINS

Requirement: Davaar64 on Linn DS/DSM and minimum Kazoo 4.13


A PIN is the physical selection of six buttons on the top facia of the following Linn products:

Each PIN can be assigned/programmed by using Linn App, Kazoo to a saved Playlist, local source, Radio preset... to allow a quick and simple selection of your favourite music

The PIN service has been extended to all Linn DS/DSM products via the control software. Such as Linn App, Kazoo PC or MAC, Kazoo - Android devices, Crestron, Control4 & Savant.

More and more media attachment options are being added with software improvements, so watch this space.

(Pressing two PIN buttons at the same time can also be used in the setup of the relevent product. Check the relevant product page for more information)


IR Remote control PIN use

The REM 022 IR handset has six direct selection PIN buttons


The Linn IR handsets allow to select a defined PIN on your Linn DS/DSM using the number (1-6) keypad.

Press AND HOLD number 1 for a couple of seconds will select PIN1,
Press AND HOLD number 2 for a couple of seconds will select PIN2, etc

...
If you have any difficulty after creating new PIN's in Kazoo:

  1. Power cycle the Linn DS/DSM and this should fix the issue.
  2. Check the batteries in the REMOTE, when you press any button then the STANDBY light should be on for as long as the button is pressed.


PIN FAQs:

  • We currently support pinning from Kazoo Server (V4.9.8 onwards) , Tidal, Qobuz, TuneIn, CalmRadio, DS radio presets, and Linn DSM external inputs
  • This is only applicable with Linn DS/DSM players with Davaar 64 or higher firmware
  • This currently does NOT support Pins to external pre-amplifier inputs, such as Akurate Kontrol, Kisto etc.
  • PINs use discrete IR codes and are not used with any other Linn Product control.
  • PINS for Radio stations are wrongly created with Kazoo V4.13.21, this has been fixed with next version 4.13.22. If you have created a Radio station PIN and it doesn't work, check you have a later version of Kazoo and re-assign this PIN to the correct radio station.


Alexa

The New Kilmax DSM, new Majik DSM, Selekt DSM & Series3 can also be setup as Bluetooth speaker for Alexa and get the best sound from your Music

Linn Smart Homes


There are a limited number of commands available using Alexa mainly volume, basic source switching, PIN selection and Sleep state. Here are some sample commands, some are self explanatory):

"Alexa, set the volume of Kitchen to 50"
"Alexa, turn the volume down on Lounge" - turn volume down by 1 step in Lounge
"Alexa, turn the volume down on Bedroom by 20" - turn volume down by 20 steps in Bedroom
"Alexa, turn the volume up on Lounge" - turn volume up by 1 step in Lounge
"Alexa, turn the volume up on Bedroom by 10" - turn volume up by 10 steps in Bedroom
"Alexa, mute Living Room" - Mute audio in Living room
"Alexa, unmute Morning Room" - Ummute audio in Morning Room
"Alexa, turn on Kitchen" - Wake up Kitchen
"Alexa, turn off Dining Room" - put Dining room to Sleep
"Alexa, next on Kids Room" - Skip forward track/radio station in Kids room
"Alexa, go forward on Guest Room" - Skip forward track/radio station in Guest room
"Alexa, go back on Kitchen" - Skip back track/radio station in Kitchen
"Alexa, pause Lounge" - Pause Lounge
"Alexa, resume Lounge" - Play Lounge
"Alexa, switch input to Blu-Ray on Living Room" - Select Blu-Ray DSM input in Living Room
"Alexa, change channel to 3 on Lounge" - Select Pin3 in Lounge DS/DSM
"Alexa, change channel to 1 on Bedroom" - Select Pin1 in Bedroom DS/DSM


Currently only supporting the English language, but more can be added to the Wishlist on request.

PC/MAC/Android/IOS Control software



www.Linn.co.uk
PC, MAC, iPad.... software control options & configuration software



3rd Party controllers (AMX/Crestron/Control4/RAKO)

Released in Feb 2017 for use with 'Kazoo Server (4.7 or later)' :

Control4 with Kazoo Server

The Control4 module provides the following features,
  • Simple integration and installation via a Linn provided Control4 certified module
  • Seamless integration between Control4 and Linn (OpenHome) allowing the use of a Control4 UI, Linn Kazoo, BubbleDS, or other OpenHome control points.
  • Support for cloud and local music through Control4 virtual sources for browsing and searching Tidal, Qobuz, TuneIn, Kazoo Server and Minim Server
  • Support for AV installations, such as Kaleidescape, through volume and source switching modules
  • Support for Control4 zone grouping
  • OS 2.8 compatible

Crestron with Kazoo Server

The Crestron module provides the following features,
  • Simple integration and installation via a Linn provided Crestron IPP module
  • Seamless integration between Crestron and Linn (OpenHome) allowing the use of a Crestron UI, Linn Kazoo, BubbleDS, or other OpenHome control points.
  • Support for AV installations, such as Kaleidescape, through volume and source switching modules
  • Support for cloud and local music through modules for browsing and searching Tidal, Qobuz, TuneIn, Kazoo Server and Minim Server
  • Multi-room audio; support for both dynamic and static grouping of rooms
  • Presets to quickly access favourite music
  • Smart Graphics GUI, in landscape orientation, with Linn Kazoo look and feel, but also re-skinable in an installer specific Look & Feel.
  • Support for resolution of TMPC-4SMD
  • Available for Crestron 3-series processors and Core 3 GUIs

Click the button below to register your interest and get started with the sign-up process, and a Linn Business Representative will be in touch. Register interest


Other modules:

424px-AMX+Crestron.jpg

Crestron DS/DSM control module
3rd party control solutions
Kazoo integration on IOS


RAKO Wallplate - click to enlarge

This control has been developed by Rako using their bridge product – for further information please contact Rako directly on +44 (0) 1634 226666.


Control4-ExtraVegetables - click to enlarge

Control4 system




SPOTIFY

Spotify Connect can now be used from Davaar59 or later firmware. This allows you to select and Play your Spotify music on your Linn DS/DSM players and use the internal volume control on the Linn DS/DSM. This is web controlled and if your LInn DS/DSM has been paired with your Spotify account you will be able to control even if you are not on the same ethernet network.

ROON

The Linn DS/DSM requires Davaar63 or later to work with Roon V1.5 and above.

On Linn DS proxy setups, Linn DS with Linn Kontrol preamplifer connected with RS232, the Roon volume control will not control the Linn Kontrol volume. This will only work with Linn DSM or Linn DS with internal volume control disabled.
A Roon HUB is required in your network system to allow Roon to control your Linn DS/DSM.
ENABLE the Linn DS/DSM player in the Roon - Settings - Audio - NETWORKED section.

Knekt BASIK3 RCU



BASIK-3-RCU BASIK-3-IR RCU These can only be used with the Sneaky Music DS, Sekrit DS, Sekrit DS-I and Sekrit DSM Accessory RC5 socket. This must be wired with Knekt CAT-5 wiring
These wall mounted control units will give push button control of Sleep state and Volume +/-. Ensure that "Auto Play" is enabled in Konfig
The tear-drop shaped BASIK-3-IR also has an IR receiver to allow IR handset control of the Linn DS/DSM