DS & REM 019

From LinnDocs
Jump to: navigation, search

Linn Remote Control Handset Operation with Linn DS

The following functionality is available on all Linn DS devices with Infra-Red (IR) controllability. If IR is not currently enabled on the Linn DS then this can be done via Linn Konfig.


Enable IR on the Linn DS

  • Open Linn Konfig.
  • Select the Linn DS.
  • Select the Configuration tab.
  • Set Handset Commands Accepted to All, Dvd or Cd depending on user requirement.



Source selection

Handset Keys - click to enlarge

The handset can be used to select sources on your Linn DSM. This can be performed using the number keypad.

Press AMP followed by the input number.

  1. - Playlist input
  2. - Radio input
  3. - Songcast input
  4. - NetAux
  5. - UpnpAV input
  6. - First external source (Analog on the Sekrit-DSI, Analog1 on the Majik DSi etc)
  7. - second external source (SPDIF on the Sekrit-DSI, Analog2 on the Majik DSi etc)
  8. - third external source (Toslink on the Sekrit-DSI, Analog3 on the Majik DSi etc)

etc....

Note: These input numbers may change with software updates of these products.





Handset Keys - click to enlarge

Configure the Linn Remote Control Handset to work with the Linn DS

The Line Remote Control Handset should be configured for DVD commands or CD commands depending on user requirement.

  • Press Dvd.jpg to enable DVD commands.
  • Press Shift.jpg then Dvd.jpg to enable CD commands.

To get the Linn DS device information

  • Press Dvd.jpg to enable DVD commands.
  • Press Help.jpg to enable DS information commands.
This starts of with the IP address
Subsequent presses of the Help.jpg key gives you:
MAC Address, DS Name, DS model, software version, software updates available,
DS serial number, network gateway, DHCP address, subnet mask,
Track playing information, IP address .....

This will enable you to have basic control and configuration options by putting the DS IP address in a web-browser address bar
e.g. If you DS shows the IP address 192.168.0.27 then type in

http://192.168.0.27 into the address bar

Playlist Source

The Linn Remote Control Handset will be able to access any playlist that is currently loaded onto the Linn DS via a Linn compliant control point.

The playlist will remain loaded on the Linn DS until it is cleared via a Linn compliant control point or if the Linn DS is power cycled or the reboot command is selected from Konfig.

Ensure that the Linn Remote Control Handset is configured to work with the Linn DS ..here



Handset Keys - click to enlarge

Playing music from the playlist source

  • Load a playlist onto the Linn DS via a Linn compliant control point.
  • Press Subt.jpg to select the Playlist source.
  • Press Play.jpg to play music from the playlist.








Handset Keys - click to enlarge

Direct track selection using numerical keys

  • Load a playlist onto the Linn DS via a Linn compliant control point .
  • Press any of the numerical keys to select the corresponding track.
  • To enter a track number in double figures simply press the required numbers in succession.
  • Once a track number is entered after 2 seconds it will be selected.
  • Press Select.jpg after the track number is entered to immediately select the track.
  • PressLeft.jpgto erase the digit if the wrong number is entered.





Handset Keys - click to enlarge

Navigating through the playlist

  • Press Fastforward.jpg for fast search forward or Fastrewind.jpg for fast search backwards.
  • Press Skipforward.jpg for next track selection or Skipback.jpg for previous track selection.








Handset Keys - click to enlarge

Stopping or pausing the music

  • Press Stop.jpg to stop the music playing.
  • Press Pause.jpg to pause the music.

Radio Source

The Linn Remote Control Handset can be used to access the Radio Source through the Linn DS.

When listening to the Radio Source a good quality Internet connection is required.

By default the Linn DS presets will be set to the Linn provided Worldwide account.

Ensure that the Linn Remote Control Handset is configured to work with the Linn DS ..here



Handset Keys - click to enlarge

Playing audio and selecting presets from the Radio source

  • Press Zoom.jpg to select the Radio source.
  • Press Dvd.jpg then any of the numerical keys to select the corresponding preset.
  • To enter a preset number in double figures simply press the required numbers in succession.
  • Once a preset number is entered after 2 seconds it will be selected.
  • Press Select.jpg after the preset number is entered to immediately select the preset.
  • PressLeft.jpgto erase the digit if the wrong number is entered.




Handset Keys - click to enlarge










Handset Keys - click to enlarge

Stopping or re-selecting audio from the preset

  • Press Stop.jpg or Pause.jpg to stop audio from the preset.
  • Press Play.jpg to re-select the preset.








Create and customise your own radio presets

  • You can create and customise your own list of radio presets using Tunein Radio (previously RadioTime). Click here to find out how.

On Device Playlist Navigation

The following functionality is available on Linn DS devices that have a front panel display. A remote control handset is required to invoke the functionality. A playlist must first be loaded to the device via a Linn compliant control point (Playlist source must be selected if available). 3rd party UpnpAv control points currently only support playlists of 1 track, so will not work (currently playlist sizes up to 1000 tracks are supported otherwise).

PIN Selection

The Linn IR handsets allow to select a defined PIN on your Linn DS/DSM using the number (1-6) keypad.

Press AND HOLD number 1 for a couple of seconds will select PIN1,
Press AND HOLD number 2 for a couple of seconds will select PIN2, etc

...
If you have any difficulty after creating new PIN's in Kazoo:

  1. Power cycle the Linn DS/DSM and this should fix the issue.
  2. Check the batteries in the REMOTE, when you press any button then the STANDBY light should be on for as long as the button is pressed.


PIN FAQs:

  • We currently support pinning from Kazoo Server (V4.9.8 onwards) , Tidal, Qobuz, TuneIn, CalmRadio, DS radio presets, and Linn DSM external inputs
  • This is only applicable with Linn DS/DSM players with Davaar 64 or higher firmware
  • This currently does NOT support Pins to external pre-amplifier inputs, such as Akurate Kontrol, Kisto etc.
  • PINs use discrete IR codes and are not used with any other Linn Product control.
  • PINS for Radio stations are wrongly created with Kazoo V4.13.21, this has been fixed with next version 4.13.22. If you have created a Radio station PIN and it doesn't work, check you have a later version of Kazoo and re-assign this PIN to the correct radio station.