Savant

From LinnDocs
Jump to: navigation, search

The first Savant.png approved IP control driver has designed for the Linn Selekt DSM

This is included in the Savant System Library and allows you to to use with all configurations of Linn Selekt cartridges.

da Vinci 10 - Racepoint Blueprint > Components
Selekt-Components-Selekt.png


Savant Selekt DSM profile

V1.1 released April 2022 (downloadable from > HERE < )
You can configure the Savant profile to match the cartridge configuration of the Linn Selekt DSM (IP):
This includes the addition of
  • Selekt HDMI Switch card
  • Slot 1, 2 and 3 configuration.
> All 3 slots allow you to select 2Ch LINE OUT, POWER OUT and SUB + SPEAKER OUT modules.
> Slot 1 is the only slot, you can group all 3 slots to make it surround sound. Use the SURROUND LINE OUT or SURROUND POWER OUT module to group 3 slots together and form it as surround sound.
This device will generate an AM Radio service for the internal Network Radio service and provide seek functionality


Savant Home-Page.png       Savant Media Inputs.png       Savant Audio inputs.png       Savant HDMI Inputs.png




Components

Recommend that the Linn Selekt DSM has a MAC Address reservation on the DHCP server to maintain the same IP address for this installation.

Racepoint-Blueprint Selekt.png




Slots

Change the "Slots" content to allow you to configure the Savant driver to match the Selekt DSM setup with

HDMI card, Power Amplifier and Line modules;
Inspector.png