Akurate DSM (Exakt Variant)

From LinnDocs
Revision as of 15:25, 20 November 2020 by Yoda (talk | contribs) (Network Setup)
Jump to: navigation, search
AkurateKontrolFrontTop.jpg

Getting Started

www.linn.co.uk/go/akurate

Product info

  • Product Name: Akurate DSM/1 (Variant 2014)
Other variants of this product can be found at Akurate DSM varinats
  • Date of Introduction: June 2014 - Sept 2016
Replaced by Akurate DSM/2 in 2016
  • Type: Integrated digital music player and preamplifier


Hardware Upgrades

HDMI 2.0 Upgrade
Linn Surround Module for bitstream Surround sound decoding


Note: It should be noted that information may at times be out of date and should not be used as a current list of what upgrades are available.'

Support

Linn Support Site

Latest software

Latest software releases

Details of latest Product release software

Manuals

Quickstart Guide

Using the Linn DS/DSM/HUB with IR handset, PC, MAC, Android tablet, iPad/iPhone...
Remote Control manual
Manage Systems manual
Space Optimisation (Advanced)
Surround Sound with Exakt systems
Safety Information
Warranty Terms and Conditions
Third Party Software Copyright

Network Setup

Back Panel Connections

Akurate DSM 1 rear.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  3. ETHERNET - To connect to a network.
  4. EXAKT LINK- To connect to Exakt compatible devices
  5. ANALOGUE INPUTS (XLR, line level) - To connect sources with balanced (XLR) outputs.2
  6. ANALOGUE INPUTS (RCA, phono/line level) - To connect a turntable or line level source3 with unbalanced (RCA) outputs.1 & 2 (Default MC phono)
  7. PHONO GROUND - To connect to a turntable grounding terminal.
  8. ANALOGUE OUTPUTS (XLR,variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.2
  9. ANALOGUE OUTPUTS (RCA, variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
  10. DIGITAL INPUTS (Spdif) - To connect sources with Spdif (RCA) digital outputs.
  11. DIGITAL OUTPUT (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.
  12. DIGITAL INPUTS (Toslink) - To connect sources with Toslink (optical) digital outputs.
  13. DIGITAL OUTPUT (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
  14. HDMI INPUTS - To connect sources with HDMI 1.4 outputs.
  15. HDMI OUTPUT - To connect to a display device with HDMI 1.4 inputs.
  16. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.


1 Input 3 is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line-level input.
2 Analogue inputs (including front panel AUX IN), can be pass through an Analogue volume control to the Analogue out when Delay mode set to DIRECT on these inputs. 3 This input can be adjusted for different Phono stages or Line level by reconfiguring a circuit board within the Linn DS.



Akurate DSM/1 Differences

To see the differences between the Akurate DSM products check here

Front Panel Connections

Akurate DSM front.jpg
  1. MUTE BUTTON - Mutes/unmutes the audio
  2. VOLUME ADJUST BUTTONS - Changes the volume up/down
  3. SOURCE SELECT BUTTONS - Changes to the previous/next source
  4. SLEEP BUTTON - Brings the unit in/out of sleep mode
  5. FRONT PANEL DISPLAY
  6. HEADPHONE OUTPUT - To connect to stereo headphones with a 3.5mm input
  7. AUX SOURCE INPUT - To connect to a stereo audio source with a 3.5mm output 2
  8. POWER SWITCH- Switches the power on/off


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

Exakt options

Exakt usage with the Akurate DSM/1 can be found in Akurate_Exakt_System


Front display information

Akurate FP display.png

Key points

  • "No Network/LAN" indicates that the Linn DS/DSM/HUB does not have a live computer network connection. This can simply be that the cable is loose or that your computer network/LAN is off/not connected.
  • ! indicates that the Linn DS/DSM/HUB is expecting to see all of the pre-configured Exakt devices, (Exakt speakers, Exakrbox.., Urika-II) connected but it cannot see them. This is typically because the Exakt devices are physically disconnected from the Exakt-link network, they physically have no power going to them or the Linn DS/DSM/HUB has prevously been configured for these products but have not been removed from its setup.

FAQ's

Check:


For further assistance, try our customer support pages