New Product template

From LinnDocs
Revision as of 08:50, 31 July 2019 by Yoda (talk | contribs) (Product info)
Jump to: navigation, search

Linn Setup Guide:
How to set up the Linn KIKO

KikoFront-1-0.jpg


Product info

  • Product Name: KIKO
  • Date of Introduction: July 2012
  • Type: Integrated digital music player, pre-amplifier and power amplifier
  • Versions: None


Initial Setup

If you have just received this Linn product then you will be eager to listen to the Music. This section will show you how to unpack it, wire it up, position it and get Music playing...

Unpacking

Remove the Kiko & speakers from the packing and check you have all of the accessories. Now place the product you want it to be. Make sure that you have:

  • A mains power socket
  • A ethernet/LAN connection to your broadband Router. (The Kiko does not have any inbuilt Wiki capabilty, you need to connect it to a wired network connection first. Then you can use thw Wifi capabilities of your network to control and stream music to the Kiko)

Wiring

Connecting the speakers to the Linn Kiko

To insert connect up the speakers into the speaker:

  1. The cable plug and speaker socket are keyed to prevent plugging incorrectly. Please view the speaker plug and socket to find the correct orientation.
  2. . Insert plug into socket and twist clockwise until they lock together.
  3. Repeat the action for connecting the speaker cable to the Linn Kiko. Find the plug key and socket key and insert then twist until it locks.
Kiko Speaker cable connect.jpg

Disconnecting the speakers from the Linn Kiko

To disconnect the speakers:

  1. On the plugs you will find a lock slide.
  2. Pull this slide back and twist the plug anti-lockwise whilst gently pulling the plug out of the socket.
Kiko Speaker cable disconnect.jpg



Kiko back panel sockets

Kiko DSM rear 1-1.jpg

Connecting to Ethernet

Plug your Ethernet cable from you Broadband router into Kiko socket number 3, shown above.

Connecting TV, Satellite receivers, DVD players etc

Connect your TV to the HDMI OUT, Socket 4 above.
Connect your Blu-Ray, Satellite reciever, camera etc to the remaining HDMI IN sockets, socket group 5 above.
If you have any audio only sources such a MP3 player, CD players etc they can connect to the respectibe sockets 6,7 or 8 shown above.
For more details on these rear panel sockets then check  this page for more information

Positioning

Review the advised Positioning guide to ensure safe and cool operation of the Kiko
The speaker cables supplied 2M long, your Linn Retailer can make longer/shorter one on request.


Download App

Kazoo Playlist iPad.jpg

The Linn DS/DSM can be done from many control points at the same time.
Note: from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

The name of this control App/software is KAZOO..

Kazoo control App/software is available for
Windows Kazoo software download

| Windows Kazoo download
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

OSX Kazoo download

MAC OSX Kazoo download
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

Kazoo App - Google Play for Phone/Tablet Android Kazoo for Android Phone/Tablet download
from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)



Setup and changes


Configuration.png

After you have wired up your Linn system this may require setup from the Windows 7/10 or MAC OSX app.
This Konfig App can be downloaded from KONFIG App

This will allow to change the Room name, Kiko name, input name and other settings. This can be changes by yourself and/or your Linn Retailer.

Details of most of the options are listed in the Konfig Manual, this covers a lot of options



Using your system

The Kiko has no front panel buttons, only a mains power switch on its side.

Kiko DSM Front 1-1.jpg
  1. HEADPHONE OUTPUT - To connect to stereo headphones with a 3.5mm input
  2. AUX SOURCE INPUT - To connect to a stereo audio source with a 3.5mm output
  3. IR SENSOR - Recieves IR commands
  4. STANDBY LED
  5. FRONT PANEL DISPLAY
  6. POWER SWITCH- Switches the power on/off



Controlling your Linn DS/DSM

To control you Kiko you can you the infra-red handset supplied with product as well as the Linn App, Kazoo that was previously downloaded & installed

The infra-red handset supplied has;-

REM022-diag.png

  * Volume control,
  * Input control,
  * Radio station selection,
  * Playlist navigation and
  * Transport control (Play, Stop, Pause, Skip & search

Controling your Kiko using a PC/MAC or Tablet

Kazoo_Manual