Difference between revisions of "Majik ExaktBox-I"

From LinnDocs
Jump to: navigation, search
(Installation)
m
 
(52 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
[[Image:Linn_Majik_Exaktbox-I_Front_Silver.jpg‎|right]]
 
[[Image:Linn_Majik_Exaktbox-I_Front_Silver.jpg‎|right]]
 
== '''Getting Started''' ==
 
[http://www.linn.co.uk/go/Majik '''www.linn.co.uk/go/majik''' ]
 
  
 
== '''Product info''' ==
 
== '''Product info''' ==
Line 13: Line 10:
 
:::::October 2015
 
:::::October 2015
  
* ''Type:'' Digital Crossover with Exakt Technology and Integrated Ampl-fiers
+
* ''Type:'' Digital Crossover with Exakt Technology and Integrated Amplifiers
::Supports  
+
{{TAB2}} Supports  
::::Stereo speakers from 2way to 4way
+
{{TAB4}}{{TAB2}}*<u>'''ONE'''</u> or <u>'''TWO'''</u> loudspeakers  '''<u>ONLY</u>''' as digital crossover</span>
::Software upgradable to support more and more loudspeakers
+
{{TAB4}}{{TAB2}} Each loudspeaker can only be '''2-way, 3-way or 4-way'''
::Connects directly to externally Aktiv speakers or power amplifiers and externally Aktiv speakers  
+
{{TAB4}}{{TAB2}} Software upgradable to support more and more loudspeakers
 +
{{TAB4}}{{TAB2}} Connects directly to externally Aktiv speakers or power amplifiers and externally Aktiv speakers  
 +
{{TAB4}}OR
 +
{{TAB4}}{{TAB2}}*Can be used to directly feed Surround channels in a [[Surround_Sound#Introduction|Surround Sound system]]
  
:* Can only be used wit Exakt-Link output products  
+
:* It can only be used with Exakt-Link output products  
  
 
* ''Features''  
 
* ''Features''  
 
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]
 
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]
** ''Exakt Technology''
+
** [[Menu:What_is_Exakt%3F|EXAKT]]
 +
** [[Surround_Sound#Introduction|Surround Sound]]
 +
 
 +
 
 +
* ''Specification''  
 +
::Power output: 8 x 100W into 4 ohms
 +
::Line Level output: 3 x 0dBv from 300ohm source impedance
 +
::Weight: 8.8 kg / 19lb
 +
::Dimensions:
 +
::: Metric  (H) 80 mm x (W) 381 mm x (D) 355 mm
 +
::: Imperial(H) 3.15 inches x (W) 15 inches x (D) 14 inches
  
 
== '''Support''' ==
 
== '''Support''' ==
  
 
[http://www.linn.co.uk/support Linn Support Site]
 
[http://www.linn.co.uk/support Linn Support Site]
 +
 +
 +
== '''Installation''' ==
 +
<br>
 +
'''As this is an Exaktbox the initial setup must be performed with a Local Area Network that has Internet access. Otherwise, [[Konfig_Manual|Konfig]] cannot set the speaker channel, Speaker profile and Space Optimisation of these products'''
 +
<br>
  
 
== '''Latest software''' ==
 
== '''Latest software''' ==
  
[http://www.linn.co.uk/ds_software Latest software releases]
+
{{General:Latest_Product_SW}}
 
 
[http://oss.linn.co.uk/trac Open source software]
 
  
 
== '''Manuals''' ==
 
== '''Manuals''' ==
  
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]
+
{{General:Product_Manuals_Exaktbox}}
 
 
[[Space_Optimsation | Space Optimisation+]]
 
 
 
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]
 
 
 
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]
 
 
 
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]
 
  
 
== '''Back Panel Connections''' ==
 
== '''Back Panel Connections''' ==
Line 59: Line 65:
 
# '''MAINS INPUT''' - To connect to the mains electricity supply.
 
# '''MAINS INPUT''' - To connect to the mains electricity supply.
 
# '''EXAKT LINK'''- To connect to Exakt compatible devices (CAT-5 cables)
 
# '''EXAKT LINK'''- To connect to Exakt compatible devices (CAT-5 cables)
# '''SPEAKER OUTPUTS''' (4mm, Banana) - To connect to '''AKTIV''' speakers
+
# '''SPEAKER OUTPUTS''' (4 mm, Banana) - To connect to '''AKTIV''' speakers (100W into 4ohm)
 
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to  power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance)
 
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to  power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance)
 
# '''FALLBACK''' - Primarily for Linn service use only, to put the device into Fallback mode (used when reprogramming the unit).
 
# '''FALLBACK''' - Primarily for Linn service use only, to put the device into Fallback mode (used when reprogramming the unit).
  
Note: Both 4mm and RCA outputs are active simulatneously.  
+
Note: Both 4 mm and RCA outputs are active simultaneously.  
 
<br><br>
 
<br><br>
 
=== EXAKT LINK Connections ===
 
=== EXAKT LINK Connections ===
Line 69: Line 75:
  
 
[[Image:Exakt Link.jpg|centre|232x265px|Image:Exakt Link.jpg]] <br>
 
[[Image:Exakt Link.jpg|centre|232x265px|Image:Exakt Link.jpg]] <br>
Example if you are using a Majik DSM/1 to connect to an Akurate ExaktBox:<br>
+
For example, if you are using a Majik DSM/1 to connect to an Akurate ExaktBox:<br>
 
[[Image:MajikDSM_to_MajikEBI_wiring.jpg‎  |centre]] <br>
 
[[Image:MajikDSM_to_MajikEBI_wiring.jpg‎  |centre]] <br>
 
The Exakt-link cable can supply digital audio for multiple speakers. <br>
 
The Exakt-link cable can supply digital audio for multiple speakers. <br>
Use Konfig > Exakt Setup pages to declare if Channel1 is left or right hand channel and Channel2 is left or right hand channel
+
Use Konfig > Exakt Setup pages to declare if Channel1 is left or right-hand channel and Channel2 is left or right-hand channel
  
 
Check [[Exakt_link | '''HERE''']] for more information of Exakt link connection
 
Check [[Exakt_link | '''HERE''']] for more information of Exakt link connection
Line 98: Line 104:
  
  
'''DOUBLE CHECK the wiring from the Exaktbox-I to speaker terminals!'''<br>
+
'''DOUBLE-CHECK the wiring from the Exaktbox-I to speaker terminals!'''<br>
If there are any mis-wires or wrong speaker definintions in the Exaktbox, you may blow the speaker drive units, so take care.
+
If there are any mis-wires or wrong speaker definitions in the Exaktbox, you may blow the speaker drive units, so take care.
  
If this is the first connection use the standard Aktiv test scenario.  
+
If this is the first connection, use the standard Aktiv test scenario.  
 
# Put the Linn DS/DSM into Sleep mode to power down the Majik ExaktBox-I.  
 
# Put the Linn DS/DSM into Sleep mode to power down the Majik ExaktBox-I.  
 
# Disconnect any Majik Exaktbox-I to speakers connections
 
# Disconnect any Majik Exaktbox-I to speakers connections
# Set to a low volume value, e.g 40-50
+
# Set to a low-volume value, e.g. 40-50
 
# Do the following tests 5,6,7,8 starting with the Bass connections, then Midrange, then tweeter and finally super tweeter in that order.
 
# Do the following tests 5,6,7,8 starting with the Bass connections, then Midrange, then tweeter and finally super tweeter in that order.
# Connect respective (Bass or Mid or tweeter ot super-tweeter) Exaktbix-I connection to the Bass connection (Bass or Mid or tweeter ot super-tweeter) of the speaker.
+
# Connect the respective (Bass or Mid or tweeter or super-tweeter) Exaktbox-I connection to the Bass connection (Bass or Mid or tweeter or super-tweeter) of the speaker.
# Bring the Linn DS/DSM out of Sleep mode and play some Music. Check that you are only getting (Bass or Mid or tweeter ot super-tweeter) audio from that speaker drive unit.
+
# Bring the Linn DS/DSM out of Sleep mode and play some Music. Check that you are only getting (Bass or Mid or tweeter or super-tweeter) audio from that speaker drive unit.
 
# Stop the Music playing and put the Linn DS/DSM into Sleep mode
 
# Stop the Music playing and put the Linn DS/DSM into Sleep mode
# Leave this cable connected go to Step4 and connect the next speaker drive unit in the list.
+
# Leave this cable connected, go to Step4 and connect the next speaker drive unit in the list.
'''If you change speaker or variant, this may also change the Exaktbox-I terminations so DOUBLE CHECK'''
+
'''If you change the speaker or variant, this may also change the Exaktbox-I terminations, so DOUBLE CHECK'''
  
To see the Exaktbox terminations for each speaker[[Akurate Exaktbox connections| click here]]
+
To see the Exaktbox terminations for each speaker,[[Akurate Exaktbox connections| click here]]
  
 
=== EXAKT LED Status ===
 
=== EXAKT LED Status ===
Line 185: Line 191:
  
 
* The ExaktBox-I is shipped from Linn with no speaker setup and must be configured with Konfig software.
 
* The ExaktBox-I is shipped from Linn with no speaker setup and must be configured with Konfig software.
 +
 +
<br><br>
  
 
== '''Exakt options''' ==
 
== '''Exakt options''' ==
Line 190: Line 198:
 
<br><br>
 
<br><br>
  
One of the beneifts of the Exakt system is that you can easily setup and optimise your listening environment. Simply [http://www.linn.co.uk/software download] the latest version of Konfig (version 4.11.7 or higher) and follow the [[Space_Optimsation|Space_Optimsation+]]  & [[Advanced_Space_optimisation | Space Optimisation+ (Advanced)]]
+
One of the benefits of the Exakt system is that you can easily set up and optimise your listening environment. Simply [http://www.linn.co.uk/software download] the latest version of Konfig (version 4.11.7 or higher) and follow the [[Space_Optimsation|Space_Optimsation+]]  & [[Advanced_Space_optimisation | Space Optimisation+ (Advanced)]]
 
<br><br><br><br>
 
<br><br><br><br>
  
<!--
 
== '''Supported speakers''' ==
 
Currently available using '''one''' Akurate Exaktbox<br>
 
'''Note: these speakers must be made externally Aktiv'''
 
* [[Akurate_Exaktbox_connections#Klimax_350|'''pair Klimax / Artikulat 350''']](Externally Aktiv 350's will need to be converted for use with the Exaktbox operation)
 
* [[Akurate_Exaktbox_connections#Akubarik|'''pair Akubarik passive''' made Aktiv]]
 
* [[Akurate_Exaktbox_connections#Akudorik_Passive|'''pair Akudorik passive''' speakers made Aktiv]]
 
* [[Akurate_Exaktbox_connections#Akurate_242|'''pair Akurate 242 Mk1 & Mk2''']]
 
* [[Akurate_Exaktbox_connections#Akurate_212|'''pair Akurate 212 Mk1 & Mk2''']]
 
* [[Akurate_Exaktbox_connections#Katan|'''pair Katan''']]
 
* [[Akurate_Exaktbox_connections#Komri|'''pair Komri''']]
 
* [[Akurate_Exaktbox_connections#Keltik|'''pair Keltik''']]
 
* [[Akurate_Exaktbox_connections#Espek|'''pair Espek''']]
 
* [[Akurate_Exaktbox_connections#Majik_Isobarik|'''pair Majik Isobarik''']]
 
* [[Akurate_Exaktbox_connections#Majik_140|'''pair Majik 140''']]
 
* [[Akurate_Exaktbox_connections#Ninka|'''pair of Ninka speakers''']]- bi-amped or Tri-amped
 
* [[Akurate_Exaktbox_connections#Keilidh|'''pair of Keilidh''']]- Bi-Amped & Tri-Amped (t1-Tweeter 15, T2-Tweeter 038)
 
* [[Akurate_Exaktbox_connections#AV5140| '''pair of AV5140''']]
 
* [[Akurate_Exaktbox_connections#Kaber|'''pair of Kaber''']]
 
* [[Akurate_Exaktbox_connections#Majik_109|'''pair of Majik 109''']]
 
<br><br>
 
 
 
<br><br>
 
==== non-Linn speakers ====
 
Currently available
 
# [[Akurate_Exaktbox_connections#Nautilus|'''B&W Nautilus ''']]
 
# [[Akurate_Exaktbox_connections#802_Diamond|'''B&W 802 Diamond''']]
 
# [[Akurate_Exaktbox_connections#KUDOS_Super10|'''KUDOS Super10''']]
 
# [[Akurate_Exaktbox_connections#KUDOS_Super20|'''KUDOS Super20''']]
 
# [[Akurate_Exaktbox_connections#KUDOS_Titan808|'''KUSOS Titan 808''']]
 
<br><br>
 
 
-->
 
 
=== Examples of use ===
 
[[image:Majik_Exaktbox-I_example1.jpg | center | 550px]]
 
 
 
or
 
 
[[image:Majik_Exaktbox-I_example2.jpg‎ | center | 550px]]
 
  
 
== '''Supported speakers''' ==
 
== '''Supported speakers''' ==
 +
{{Warning:Exakt_channel_passthrough}}
 
[[image:Connection_Help.jpg|right|330px]]
 
[[image:Connection_Help.jpg|right|330px]]
Select '''CONNECTION HELP''' for up to date wiring information
+
Select '''CONNECTION HELP''' for up-to-date wiring information
  
  
  
Currently available using '''one''' Majik Exaktbox-I<br>
+
Examples using '''one''' Majik Exaktbox-I<br>
'''Note: these speakers must be made externally Aktiv'''
+
<span style="color:red">Note: It should be noted that information may at times be out of date and should not be used as a current list of what is supported. check <span class="plainlinks">[https://www.linn.co.uk/technology/exakt#exakt-compatible-speakers <u>www.Linn.co.uk</u>]</span></span><br>
* '''[[Majik_ExaktBox_I#Akudorik | pair Akudorik passive]]'''  
+
'''These speakers must be made externally Aktiv'''<br>
 +
Note: Speakers that cannot be made externally Aktiv e.g. Av5110, UNIK, Diskreet etc cannot be used with the Exaktbox<br>
 +
* '''[[Majik_ExaktBox_I#Keltik | pair Keltik]]'''
 +
<br>
 +
* '''[[Majik_ExaktBox_I#Akudorik | Single/pair Akudorik passive]]'''  
 
* '''[[Majik_ExaktBox_I#Akurate_212 | pair Akurate 212 Mk1 & Mk2]]'''
 
* '''[[Majik_ExaktBox_I#Akurate_212 | pair Akurate 212 Mk1 & Mk2]]'''
* '''[[Majik_ExaktBox_I#Katan | pair Katan]]'''
+
* '''[[Majik_ExaktBox_I#Akurate_225 | single Akurate 225]]'''
* '''[[Majik_ExaktBox_I#Keltik | pair Keltik]]'''
+
<br>
* '''[[Majik_ExaktBox_I#ESPEK | pair Espek]]'''
+
* '''[[Majik_ExaktBox_I#Majik_109 | pair Majik 109]]'''
 +
* '''[[Majik_ExaktBox_I#Majik_112 | Single/pair Majik 112]]'''
 +
* '''[[Majik_ExaktBox_I#Majik_140 | pair Majik 140]]'''
 
* '''[[Majik_ExaktBox_I#Majik_IsoBarik | pair Majik Isobarik]]'''
 
* '''[[Majik_ExaktBox_I#Majik_IsoBarik | pair Majik Isobarik]]'''
* '''[[Majik_ExaktBox_I#Majik_140 | pair Majik 140]]'''
+
<br>
 +
* '''[[Majik_ExaktBox_I#Komponent 104 | Komponent 104]]'''
 +
* '''[[Majik_ExaktBox_I#Komponent 106 | Single/pair Komponent 106]]'''
 +
* '''[[Majik_ExaktBox_I#Komponent 110 | Komponent 110]]'''
 +
<br>
 +
* '''[[Majik_ExaktBox_I#Custom2K 104 | Custom2K 104]]'''
 +
* '''[[Majik_ExaktBox_I#Custom2K 106 | Single/Pair Custom2K 106]]'''
 +
* '''[[Majik_ExaktBox_I#Sekrit_IW10 | pair of Sekrit IW10]]'''
 +
<br>
 
* '''[[Majik_ExaktBox_I#Ninka | pair Ninka speakers]]'''- bi-amped or Tri-amped
 
* '''[[Majik_ExaktBox_I#Ninka | pair Ninka speakers]]'''- bi-amped or Tri-amped
 
* '''[[Majik_ExaktBox_I#Keilidh | pair Keilidh]]'''- Bi-Amped & Tri-Amped (t1-Tweeter 15, T2-Tweeter 038)
 
* '''[[Majik_ExaktBox_I#Keilidh | pair Keilidh]]'''- Bi-Amped & Tri-Amped (t1-Tweeter 15, T2-Tweeter 038)
* '''[[Majik_ExaktBox_I#AV5140 | pair AV5140]]'''  
+
* '''[[Majik_ExaktBox_I#Ekwal | single Ekwal]]''' - Bi-Amped & Tri-Amped
 +
* '''[[Majik_ExaktBox_I#ESPEK | pair Espek]]'''
 +
* '''[[Majik_ExaktBox_I#AV5120 | single AV5120]]''' - Bi-Amped & Tri-Amped
 +
* '''[[Majik_ExaktBox_I#AV5140 | pair AV5140]]'''
 
* '''[[Majik_ExaktBox_I#Kaber | pair Kaber]]'''
 
* '''[[Majik_ExaktBox_I#Kaber | pair Kaber]]'''
* '''[[Majik_ExaktBox_I#Majik_ExaktBox_I#Majik_109 | pair Majik 109]]'''
+
* '''[[Majik_ExaktBox_I#Katan | pair Katan]]'''
 +
* '''[[Majik_ExaktBox_I#Isobarik | pair of original Isobarik]]'''
 +
<br>
 +
<span style="color:red">'''Unused Channels ⁣ ⁣CANNOT⁣/u> be used for another speaker or purpose.'''<br><br>
 +
The Majik Exaktbox-I will only work with loudspeakers up to 4-way. This means that you '''<u>CANNOT</u>''' use this Majik Exaktbox-I to drive 5-way, or higher, speakers such as the AkuBarik loudspeakers.</span>
 
<br><br>
 
<br><br>
 
==== non-Linn speakers ====
 
==== non-Linn speakers ====
Currently available
+
Examples using '''one''' Majik Exaktbox-I<br>
 +
<span style="color:red">Note: It should be noted that information may at times be out of date and should not be used as a current list of what is supported. check <span class="plainlinks">[https://www.linn.co.uk/technology/exakt#exakt-compatible-speakers <u>www.Linn.co.uk</u>]</span></span><br>
 +
# '''[[Majik_ExaktBox_I#802_Diamond | Pair B&W 802 Diamond]]''' - Tri-amped or Quad-amped
 
# '''[[Majik_ExaktBox_I#Nautilus | Pair B&W Nautilus]] '''
 
# '''[[Majik_ExaktBox_I#Nautilus | Pair B&W Nautilus]] '''
# '''[[Majik_ExaktBox_I#802_Diamond | Pair B&W 802 Diamond]]''' - Tri-amped or Quad-amped
+
# '''[[Majik_ExaktBox_I#JBL_K2_S9900 | JBL K2 S9900]]'''
 
# '''[[Majik_ExaktBox_I#KUDOS_Super_10 | Pair KUDOS Super10]]'''
 
# '''[[Majik_ExaktBox_I#KUDOS_Super_10 | Pair KUDOS Super10]]'''
 
# '''[[Majik_ExaktBox_I#KUDOS_Super_20 | Pair KUDOS Super20]]'''
 
# '''[[Majik_ExaktBox_I#KUDOS_Super_20 | Pair KUDOS Super20]]'''
 +
# '''[[Majik_ExaktBox_I#KUDOS_Titan_505 | Pair KUDOS Titan 505]]'''
 +
# '''[[Majik_ExaktBox_I#KUDOS_Titan_606 | Pair KUDOS Titan 606]]'''
 +
# '''[[Majik_ExaktBox_I#KUDOS_Titan_707 | Pair KUDOS Titan 707]]'''
 
# '''[[Majik_ExaktBox_I#KUDOS_Titan_808 | Pair KUDOS Titan 808]]'''
 
# '''[[Majik_ExaktBox_I#KUDOS_Titan_808 | Pair KUDOS Titan 808]]'''
 +
# '''[[Majik_ExaktBox_I#PMC_Twenty_26 | PMC Twenty 26]]'''
 +
# '''[[Majik_ExaktBox_I#KEF_Reference_3 | KEF Reference 3]]'''
 +
# '''[[Majik_ExaktBox_I#KEF_Reference_5 | KEF Reference 5]]'''
  
 
<br><br>
 
<br><br>
 +
 +
=== Example of use with a Majik Exaktbox-I supported speaker===
 +
[[image:Majik_Exaktbox-I_example1.jpg | center | 550px]]
 +
 +
 +
or
 +
 +
[[image:Majik_Exaktbox-I_example2.jpg‎ | center | 550px]]
 +
 +
==ExaktBox Surround Channel selection==
 +
{{Info:ExaktBoxCHAssign}}
 +
  
 
==Trouble shooting==
 
==Trouble shooting==
 
Check [[ExaKt_Trouble_shooting | Exakt trouble shooting]]
 
Check [[ExaKt_Trouble_shooting | Exakt trouble shooting]]
  
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]
+
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages
 +
[[Category:Exaktbox]] [[Category:Family: Majik]] [[Category:Exakt]] [[Category:CHAKRA Class Amplifier]]

Latest revision as of 09:36, 10 August 2023

Linn Majik Exaktbox-I Front Silver.jpg

Product info

  • Product Name:
Majik ExaktBox-I


  • Date of Introduction:
October 2015
  • Type: Digital Crossover with Exakt Technology and Integrated Amplifiers
   Supports 
      *ONE or TWO loudspeakers  ONLY as digital crossover
       Each loudspeaker can only be 2-way, 3-way or 4-way
       Software upgradable to support more and more loudspeakers
       Connects directly to externally Aktiv speakers or power amplifiers and externally Aktiv speakers 
    OR
      *Can be used to directly feed Surround channels in a Surround Sound system
  • It can only be used with Exakt-Link output products


  • Specification
Power output: 8 x 100W into 4 ohms
Line Level output: 3 x 0dBv from 300ohm source impedance
Weight: 8.8 kg / 19lb
Dimensions:
Metric (H) 80 mm x (W) 381 mm x (D) 355 mm
Imperial(H) 3.15 inches x (W) 15 inches x (D) 14 inches

Support

Linn Support Site


Installation


As this is an Exaktbox the initial setup must be performed with a Local Area Network that has Internet access. Otherwise, Konfig cannot set the speaker channel, Speaker profile and Space Optimisation of these products

Latest software

Latest software releases

Details of latest Product release software

Manuals

Manage Systems setup manual
Space Optimisation (Advanced)
Surround Sound with Exakt systems
Safety Information
Warranty Terms and Conditions
Third Party Software Copyright

Back Panel Connections

Majik Exaktbox-I backpanel.jpg




  1. MAINS INPUT - To connect to the mains electricity supply.
  2. EXAKT LINK- To connect to Exakt compatible devices (CAT-5 cables)
  3. SPEAKER OUTPUTS (4 mm, Banana) - To connect to AKTIV speakers (100W into 4ohm)
  4. ANALOGUE OUTPUTS (RCA, variable level) - To connect to power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance)
  5. FALLBACK - Primarily for Linn service use only, to put the device into Fallback mode (used when reprogramming the unit).

Note: Both 4 mm and RCA outputs are active simultaneously.

EXAKT LINK Connections

Image:Exakt Link.jpg


For example, if you are using a Majik DSM/1 to connect to an Akurate ExaktBox:

MajikDSM to MajikEBI wiring.jpg


The Exakt-link cable can supply digital audio for multiple speakers.
Use Konfig > Exakt Setup pages to declare if Channel1 is left or right-hand channel and Channel2 is left or right-hand channel

Check HERE for more information of Exakt link connection



Speaker/Power Amplifier connections

Speaker terminals

SpeakerCables.jpg

The binding post terminals can be used as sockets for the connection of 4 mm banana plugs or can be used as binding posts for the connection of bare wires or spade terminated cables by loosening the outer section of the binding post (do not attempt to completely remove this outer section), inserting the cable or terminal and re-tightening the binding post to clamp it in place. Ensure that all the binding posts are tight.

We recommend using Class 2 wiring of at least 16AWG.








DOUBLE-CHECK the wiring from the Exaktbox-I to speaker terminals!
If there are any mis-wires or wrong speaker definitions in the Exaktbox, you may blow the speaker drive units, so take care.

If this is the first connection, use the standard Aktiv test scenario.

  1. Put the Linn DS/DSM into Sleep mode to power down the Majik ExaktBox-I.
  2. Disconnect any Majik Exaktbox-I to speakers connections
  3. Set to a low-volume value, e.g. 40-50
  4. Do the following tests 5,6,7,8 starting with the Bass connections, then Midrange, then tweeter and finally super tweeter in that order.
  5. Connect the respective (Bass or Mid or tweeter or super-tweeter) Exaktbox-I connection to the Bass connection (Bass or Mid or tweeter or super-tweeter) of the speaker.
  6. Bring the Linn DS/DSM out of Sleep mode and play some Music. Check that you are only getting (Bass or Mid or tweeter or super-tweeter) audio from that speaker drive unit.
  7. Stop the Music playing and put the Linn DS/DSM into Sleep mode
  8. Leave this cable connected, go to Step4 and connect the next speaker drive unit in the list.

If you change the speaker or variant, this may also change the Exaktbox-I terminations, so DOUBLE CHECK

To see the Exaktbox terminations for each speaker, click here

EXAKT LED Status

Majik Exaktbox-I Exakt-link indicators.jpg


LED

OFF

ON

Flash / Blink

0 Master Port No Link Link Discovered Link Activity
1 Audio Clock No Clock Clock locked Clock not locked
2 Slave Port No Link Link Enabled Link Activity
3 Software Status Not Configured Running Hardware Fault













Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • The ExaktBox-I is shipped from Linn with no speaker setup and must be configured with Konfig software.



Exakt options

Exakt usage can be found in Klimax_Exakt_System

One of the benefits of the Exakt system is that you can easily set up and optimise your listening environment. Simply download the latest version of Konfig (version 4.11.7 or higher) and follow the Space_Optimsation+ & Space Optimisation+ (Advanced)




Supported speakers

When used in this mode any spare outputs CANNOT be used for the either 6 or 8 channel passthrough Surround mode

Connection Help.jpg

Select CONNECTION HELP for up-to-date wiring information


Examples using one Majik Exaktbox-I
Note: It should be noted that information may at times be out of date and should not be used as a current list of what is supported. check www.Linn.co.uk
These speakers must be made externally Aktiv
Note: Speakers that cannot be made externally Aktiv e.g. Av5110, UNIK, Diskreet etc cannot be used with the Exaktbox







Unused Channels ⁣ ⁣CANNOT⁣/u> be used for another speaker or purpose.

The Majik Exaktbox-I will only work with loudspeakers up to 4-way. This means that you CANNOT use this Majik Exaktbox-I to drive 5-way, or higher, speakers such as the AkuBarik loudspeakers.


non-Linn speakers

Examples using one Majik Exaktbox-I
Note: It should be noted that information may at times be out of date and should not be used as a current list of what is supported. check www.Linn.co.uk

  1. Pair B&W 802 Diamond - Tri-amped or Quad-amped
  2. Pair B&W Nautilus
  3. JBL K2 S9900
  4. Pair KUDOS Super10
  5. Pair KUDOS Super20
  6. Pair KUDOS Titan 505
  7. Pair KUDOS Titan 606
  8. Pair KUDOS Titan 707
  9. Pair KUDOS Titan 808
  10. PMC Twenty 26
  11. KEF Reference 3
  12. KEF Reference 5



Example of use with a Majik Exaktbox-I supported speaker

Majik Exaktbox-I example1.jpg


or

Majik Exaktbox-I example2.jpg

ExaktBox Surround Channel selection

  • Speakers can be driven from any combination of:
  • Direct analogue output from the DSM
  • Exakt Speaker
  • Exaktbox configured with crossovers for one or two speakers
  • Exaktbox configured for surround playback
Speaker type set for
"6 x Channel Passthrough" for 5.1ch or
"8 x Channel Passthrough" or 7.1ch
Examples of speaker setups can be found HERE



  • You cannot assign mulitple Subwoofer types in the same Exaktbox.
that is, You can ONLY be assign
    • one or more LFE (Surround playback only) or
    • one or more MONO Subwoofer (Stereo Playback only) or
    • one or more LEFT Subwoofer (Stereo Playback only) or
    • one or more RIGHT Subwoofer (Stereo Playback only)

E.g. But NOT a LFE AND MONO on the same Exaktbox

Konifg-ExaktBox-Channel Select.jpg

above is an Exaktbox configured for "6 channel passthrough"
In "6 or 8 channel passthrough" Exaktbox filter selection then this Exaktbox CANNOT be used for "digital crossover" speakers as well.


Trouble shooting

Check Exakt trouble shooting

For further assistance, try our customer support pages