Klimax DS (KATALYST)

From LinnDocs
Revision as of 14:55, 24 August 2018 by Yoda (talk | contribs) (Manuals)
Jump to: navigation, search
KlimaDS 3Q 02 low res.jpg

Product info

  • Product Name: Klimax DS/3
  • Date of Introduction: Sept 2016
  • Type: Digital music player with Exakt Link capability

Support

Linn Support Site

Latest software

Latest software releases

Open source software

Manuals

Quickstart Guide

Product Information Sheet

Space Optimisation (Advanced)

Konfig manual

Kazoo User Guide

Remote Control manual

Safety Information

Warranty Terms and Conditions

Third Party Software Copyright

Network Setup

DS Budget System Setup

DS Entry Level System Setup

DS High End System Setup

Back Panel Connections

Image:Klimax_DS2_Rear.jpg‎


  1. MAINS INPUT - For connection to the mains supply.
  2. EXAKT LINK- For connection of Exakt products (Exakt speakers/ExaktBox).
  3. ETHERNET - For connecting the unit to the network.
  4. RS232 PORT - For connection to Linn pre-amps without Ethernet ports.
  5. FALLBACK - Used when reprogramming the unit.
  6. EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  7. UNBALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
  8. BALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.


EXAKT LINK connection

Check HERE for information of Exakt link connection


Front Panel Connections

Image:KlimaxDS2_Front.jpg
  1. POWER SWITCH- For switching the power to the unit on and off


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.


Exakt Options

Exakt usage the the Exakt Klimax speakers can be found at Klimax Exakt System

To enable Exakt options on the Exakt DS ensure that the internal volume control is turn ON in Konfig.

Trouble shooting

Check Exakt trouble shooting

To enable Exakt options on the Exakt DS ensure that the internal volume control is turn ON in Konfig.



For further assistance, try our customer support pages or the Linn Forum.