Difference between revisions of "Info:Series3-Mono-Stereo"

From LinnDocs
Jump to: navigation, search
m
m
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
:The <b>Series3-301</b> can be configured for <b><u>Mono</u></b> playback. (This is when left and right hand channel audio is mixed together to give one speaker)<br>
+
:The <b>Series3-301</b> can be configured for <b><u>Single</u></b> playback. (This is when left and right hand channel audio is mixed together to give one speaker)<br>
 
:Or connect a <b>Series3-302 partner speaker</b> for <b><u>Stereo</u></b> playback. (One speaker for Left hand channel and one speaker for Right hand channel)
 
:Or connect a <b>Series3-302 partner speaker</b> for <b><u>Stereo</u></b> playback. (One speaker for Left hand channel and one speaker for Right hand channel)
  

Latest revision as of 08:50, 25 October 2019

The Series3-301 can be configured for Single playback. (This is when left and right hand channel audio is mixed together to give one speaker)
Or connect a Series3-302 partner speaker for Stereo playback. (One speaker for Left hand channel and one speaker for Right hand channel)
The Series3-302 partner speaker requires its own mains power cable and a CAT-5 Exakt-link cable to hook up to the Series3-301

Example:

Series3-wiring-2sp-LAN-ARC.png

Configure for use with Series3-302 partner speaker

      Series3-Configure-125px.gif‎ Add/Remove a Partner speaker setup procedure

(This will change the Series3-301 from MONO to STEREO and use the Series3-302 as the other STEREO channel) :

1. Connect or remove the Series3-302 speaker as required:
     * Stereo mode:Connect the Series3-302 using an Exakt-link cable to the Series3-302
     * Single (mono) mode: Disconnect the Series3-302 Exakt-link from the Series3-302
2. Press and HOLD both buttons PIN-1.png & PIN-6.png on the Series3-301 until half of the Volume indicator lights illuminate
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup

Check Setup > Wiring for more example