Manage Systems

Kloud Konfig / Cloud Management / Manage systems

Introduction

The Linn Manage systems/Kloud Konfig, will allow you to setup and re-Konfigure you Linn DS/DSM from a webpage. This can work in conjunction with the Linn Konfig app with the exception of Space Optimisation.

The options are only a summary what MAY be available on your Linn DS/DSM. (Due to software improvements and hardware improvements these may change at any time.)

Installation

Linn Account creation and adding/removing Linn DS/DSM from your account The Linn Account Manage system requires your Linn DS/DSM to be attached to a “Linn Account”. You can do this by using the Linn App: First log into your Linn Account, (Or create one if you do not have one). In Linn App login into your Linn Account 1. Press the in the bottom right of the Linn App. 2. In the Settings Screen, the top section will show what Linn Account you are using. 3. If you are not logged into your Linn Account, then press the Linn Icon and proceed to the Login screen. If you do not have a Linn Account, then select the "Sign-up for a Linn Account" text. Add or remove products from your Linn Account 1. Make sure that you are on the same ethernet network as your Linn products. (In other words, make sure that you can see your Linn Products in the Linn App) 2. Check that you are logged into your Linn Account by pressing the Linn App settings button. The top of the settings menu will tell you the Linn Account used or show a Linn Account message to log in. 3. After you check, you are logged in 3.1 Click on the Settings > Linn Account Linn icon and "Add/Remove Systems" 3.2 This will show ALL the products on your network, even ones NOT of your Linn account, as well as the products already linked to your Linn Account. 3.3 Hit the + to add the product to your Linn Account 3.4 Hit the - to remove it from the Linn Account. If you are on the same local network as the Linn DS/DSM, this will allow you to remove ANY Linn DS/DSM on this local network from ANY Linn Account 4. Complete Note Registering a product does NOT add it to your Linn Account. Note Products, such as the Kustom DSM Z4/Z8, will not show in Kazoo room listing as they are not initially configured. But they WILL shown in this product listing and can be added to your account. Accessing the Linn DS/DSM in your account After adding the Linn DS/DSM players to your Linn Account: go to www.Linn.co.uk Select the Full Menu (top right) and go down to “My Account” Within the “My Account” select Manage systems. This will enter you into the System management page and “Edit Settings” or your Linn DS/DSM If you have just registered and added these to your Account, it may take a couple of minutes to show you Linn DS/DSM setup. If nothing changes then try refreshing your web-browser page, (typically function key F5 or CTRL-F5 in the browser). The Space tab will not appear until you have assigned speakers to your Linn DS/DSM in the “GENERAL” tab. with the speakers setup, you will now be able to create/update/delete/rename your Space Optimisation settings created by this application. Note: If you have any issues logging in to your Linn Account, check your web-browser doesn't have some security/privacy blockers such as "Ghostery, uBlock etc. These "security or Privacy" apps can block the communication is allowed login. Or you can access Manage Systems from your Linn App:

Operation

When you first open the Manage systems page you will be give a list of Rooms assigned to your account.

Click on EDIT SETTINGS or the room picture to Konfigure this room.

If the Linn DS has mains power and has internet access then this Linn DS/DSM will be shown "Status: Online"

---

GENERAL

System Name to change Room name DEVICES Network Player To get the details of your Linn DS/DSM Model name, Serial number, MAC Address, Software version (also known as Firmware) & BOARDS. (These are the circuit boards and their identification numbers.) Hit the > button to change the configuration If you are using a Selekt DSM you can select what the cartridges are going to be used for Stereo: Stereo if more than one cartridge then this for the Exakt crossover Stereo Passthrough: If the cartridges are used for Bi-Amping or Tri-Amping Surround Passthrough: To configure the cartridges for 5.1 surround, (or 7.1 with additional Exakt products) Note You may have to bring the Linn DSM out of Standby to change configuration. Check the Standby option further down this page. Slide the button LEFT to bring the Linn DS/DSM to turn STANDBY OFF and PRODUCT ON CHANGE CONFIGURATION: to add/remove/change your speaker definition. You will need to REMOVE your existing speakers first before you can change these to a different speaker Exaktbox Hit the > button to change the configuration Under Speakers press > to change the Exakt filter profile used. CHANGE CONFIGURATION: to add/remove/change your speaker definition. Also shows the CONNECTION GUIDE DEVICE SETUP This allows you to configure the system on your Linn DS/DSM Clicking on the button will show you all the products to configure: e.g Selekt DSM (Digital Out) : Configure the SPDIF OUT socket on the Selekt DSM Selekt DSM (Modular Speakers): Configure the Selekt DSM cartridges Akurate Exaktbox 6 (1234567): Configure the Exaktbox6 serial #1234567 360 (234567): Configure Exakt loudspeaker serial #234567 Akurate DS: configure the Akurate DS speaker .. Press CHANGE to change each device setup, and continue on the CHANGE CONFIGURATION section Change Configuration Speaker This allows you to add new speakers Or delete the speaker setup by hitting the X on the right side of the listing OR Firmware Mode This is ONLY for ExaktBox /Selekt products. Typically you will have: Mono: To work as an Exakt/Aktiv crossover for one loudspeaker Stereo: To work as an Exakt/Aktiv crossover for a pair of loudspeakers Stereo Passthrough:ONLY for Selekt DSM. This will allow each Selekt cartridge to play the same stereo audio channels with no Aktiv.Exakt filtering. Surround Passthrough: To define the Surround channels assigned and what loudspeaker is being used. Selekt Speaker Channel: This refers to the audio channel for this/these loudspeakers. If you have set for Mono mode above, this will show single channels, FL, FR, Cen... All other modes will allow to setup for channels pairs and single channels. Manufacturer: This is the Manufacturer of the speaker attached to the defined channel. E.g. Linn Model:This is the model of the speaker attached to the defined channel. E.g. Klimax 350 (In Mono & Stereo mode, this is used for the Exakt crossover profile. In Stereo Passthrough & Surround Stereo mode, this is used for Space Optimisation and speaker distancing.) FILTER This only applies to Exakt speakers: Type: This defines if this is Standard or, for example, Binged type of speaker Version: The filters depend on the loudspeaker development. (Exakt design has evolved over the years and these options allow you to decide what version of filter you want to use check Exakt_filters Original Design release Drive unit modelling Highest frequency modelling 1: Extended drive unit modelling Gain Adjustment In Surround Passthrough mode, it will then ask you if you want to add more loudspeakers for more Surround channels Confirmation Selection This is to confirm your configuration and include any wiring diagrams before programming the system The > X allows you to delete these channels from the configuration. Volume Offsets This allows you to trim the channels. Hit the Play button against each channel (marked in RED) and adjust the channel trim level. START-UP MODE A number of different settings can be applied to customise the way your device starts up Startup Mode Normally your device will power up in Sleep (aka standby). Select Active to skip sleep mode and go straight to playback mode on power up Auto Play Normally you must press play to start playing audio. Change this setting to On to make your device play audio immediately when a source is selected (only relevant to Playlist, Radio, and Songcast) Startup Source Normally your device will startup on the last source you were listening to. # You can change this setting to make sure the device starts up on a specific source instead Wi-fi If applicable to you Linn DSM this will enable or disable the WIfi operation of your Linn DSM. Note If you have a cable/LAN connection to your Linn DSM when first powered on, then the Wifi connection will be ignored. To use the Wifi connection disconnect any LAN connections and power cycle the Linn DSM. This will the use the Wifi connection. (It will have configured for you Wifi first. Check your product page in this wiki for more information) IPv6 If applicable to your Linn DSM this switch the network operation to IPv6. (It makes no difference in the sound qaulity, It is only to support evolving ethernet networks). Bluetooth If applicable to you Linn DSM this will allow your Linn DSM to receive bluetooth audio. This can be from you phone, Alexa etc Note It will have paired with your Bluetooth device first. Check your product page in this wiki for more information Analog Input Mode This is for the Majik DSM (2020 variant). This allows the Analogue input to be configured as a Line-level input, or for a Moving Magnet turntable cartridge.

Setting up Exakt loudspeakers for first time

To set up {{{1}}} : On initial set up, the Exakt speakers will not be assigned a channel or filter to use Setup Exakt Speaker In this case, it is stating that your Exakt loudspeaker will need to be configured for operation: Select Channel Assign this Exakt speaker to Front Left/Front Right/Centre/........ Selekt Filter Version & type The filters depend on the loudspeaker development. (Exakt design has evolved over the years and these options allow you to decide what version of filter you want to use check Exakt_filters Original Design release Independent drive unit modelling Independent highest frequency modelling Independent Extended drive unit modelling Gain Adjustment Finally, confirm these are correct and repeat the same procedure for the other Exakt loudspeakers Note On confirmation, this will upload all the configuration and setup into the loudspeaker. This will take a few minutes to complete.

SPACE

This tab will only appear if you have speakers assigned in the GENERAL tab. Detail of how to use this is covered with Linn Account Space Optimisation User Guide in this section You may get the warning below. This is stating that the Linn DS/DSM is in Standby and you will have to bring it out of Standby, turn Standby OFF, i.e. turn product ON to load/apply Space Optimisation. Press the STANDBY OFF to turn the product ON

DISPLAY

The options are only a review what MAY be available on your Linn DS/DSM. Brightness: If Auto-Brightness is turned off then this will allow you to set the brightness of the Linn DS/DSM display. Auto-Brightness: Enabled will allow the Linn DS/DSM detect the external brightness via it front panel sensor and adjust the display brightness accordingly. Scroll Text: When enabled this will scroll the text on the front panel when media changes. Sleep Mode: Put the display to sleep if there are no display updates after certain amount of time. Front Panel Buttons: This will stop ALL front panel buttons working, including SLEEP. This is to stop kids from playing with tbe buttons and turning up your volume when you are not there.

SOURCES

This section will allow to rename the inputs and make the inputs invisible. These Source are dependant on the model of Linn DS/DSM. Click on the icon to make the input invisible from the front panel selection and the Kazoo app. On sources with the icon click on this to expand the settings. Some of these settings cane be: Unity Gain: Turn OFF the volume control on this input. Volume Offset: this to raise or lower the comparative volume level on this input compared to other inputs. E.g. an LP12 may require a +5dB offset, but CD player may be -8db INPUT LEVEL: to define the incoming source input level. Digitise: When enabled this source is Space optimised and shared to other Rooms with Songcast. Otherwise no digital processing is carried out. Delay mode: to define the Songcast delays to other rooms.

MUSIC

This section is to define the desired audio quality from the streaming services. (Internet radio streams). Spotify Audio Quality Within the Konfig app and Linn Account Manage systems section you can change the audio quality of Spotify. Options available are: You can adjust these settings to control the quality of your incoming stream if you have internet issues. If any of these settings are changed then the next Spotify track played will be at the newly selected streaming rate. Low(96 kbit/s) Medium(160 kbit/s) High (320kbit/s) Note: The highest streaming can also be controlled by your Spotify subscription and will limit you on the free service. Songcast Sync: Due to the response timing required by Spotify, Linn DS sharing this Spotify to other rooms via Songcast may not be in perfect sync with this Spotify receiving room. Switch this ON put all Songcast rooms in sync with the Spotify room. Tidal Audio Quality Within the Konfig app and Linn Account Manage systems section you can change the audio quality of Tidal. Options available are: Enabled: To make this Tidal input visible/invisible in Kazoo. You can adjust these settings to control the quality of your incoming stream if you have internet issues. If any of these settings are changed then the next Tidal track played will be at the newly selected streaming rate. Low(96 kbit/s) High(320 kbit/s) Lossless (CD quality) Note: The highest streaming can also be controlled by your Tidal subscription and may only limit you to HIGH(320 kbit/s) on the standard service. Qobuz Audio Quality Within the Konfig app and Linn Account Manage Systems section you can change the audio quality of Qobuz. Options available are: Enabled: To make this Qobuz stream visible/invisible in Kazoo/Linn App. You can adjust these settings to control the quality of your incoming stream if you have internet issues. If any of these settings are changed then the next Qobuz track played will be at the newly selected streaming rate. Low(320 kbit/s) Lossless(44.1 kHz kbit/s) Lossless(96 kHz kbit/s) Lossless(192 kHz kbit/s) Note: The highest streaming can also be controlled by your Qobuz subscription and may only limit you to Low(320 kbit/s) on the standard service. Deezer Audio Quality Within the Konfig app and Linn Account Manage Systems section you can change the audio quality of Deezrer. Options available are: Enabled: To make this Deezer input visible/invisible in Kazoo/Linn App. You can adjust these settings to control the quality of your incoming stream if you have internet issues. If any of these settings are changed then the next Deezer track played will be at the newly selected streaming rate. Standard(128 kbit/s) High(320 kbit/s) "High Quailty" Flac (1411kbit/s) in other words CD quality / "HiFi" / "High Fidelity" Note: The highest streaming can also be controlled by your Deezer plan subscription and may only limit you to Standard(128 kbit/s) on the standard service. CALM RADIO Switch this ON to enable Calm Radio in the MUSIC tab Radio Presets Provider ( TuneIn / airable ) Linn Account Manage systems section you can change the internet radio to be either or Tunein. For more information on check HERE TUNEIN RADIO Scroll to TuneIn Radio Enabled this service Enter/rename your TuneIn Username into the "TuneIn Username" field.

Surround

Decode Mode Off - No up-mixing performed Auto - PCM streams up-mixed using DTS Neo 6 Auto algorithm DTS Neo 6 Music - PCM streams up-mixed using DTS Neo 6 Music algorithm DTS Neo 6 Video - PCM streams up-mixed using DTS Neo 6 Movie algorithm The Decode Mode setting is applicable to audio received by the following sources: HDMI, HDMI ARC, HDMI eARC, SPDIF and Toslink Streaming sources (radio, Qobuz, etc.) and analogue inputs cannot be up-mixed. These will always be presented in stereo. For all modes above downmixing if required will then be performed based on the number of speakers in the system. Dynamic range compression Standard This mode has the widest dynamic range (the difference between the quietest and loudest sounds). Quiet remains quiet, loud remains LOUD (i.e. explosions will "blow your socks off!") Medium This mode has a medium difference dynamic range. Making quiet sounds louder and louder sounds quieter (not as big a difference in sound volume) Maximum This is maximum compression Making quiet sounds louder and louder sounds quieter (not as big a difference in sound volume and "keeps your socks on") Speaker Distances Enter the distance from your main listening position to each configured speaker. These manual settings are only available and applied with Space Optimisation disabled.

OUTPUTS

The options are only a review what MAY be available on your Linn DS/DSM. DIGITAL OUTPUT MODE This refers to the Digital output (if fitted/enabled) what outgoing sample rate will be. There is NO volume control on this output. Raw: Digital output is the original bit rate. 88/96kHz: Digital output is the either 88.2k or 96k. 176/192kHz:Digital output is the either 176/2k or 192k. Post EQ: 192kHz: Digital output for front left/right speakers with volume control and Space Optimisation. (Only available on some products) Disabled: No Digital output. Analogue output When Exakt speakers are setup on this Exakt DSM then the analogue output is disabled as this audio will NOT be in sync with the Exakt audio. If you want to have both analogue and Exakt front L/R outputs this must be enabled. (Default: DISABLED) SPDIF Mode On some products an SPDIF socket can configured for an Output, instead of the default Input. This Input or Output mode is set here.

VOLUME

The options are only a review what MAY be available on your Linn DS/DSM. Volume Control: To enable/disable the volume control on ALL inputs. This will also disable your Exakt speakers. Startup Volume(dB): Volume settings when you bring the Linn DS/DSM out od Sleep/Standby. Balance: Left/right balance setting Max Volume(%): The highest volume level the user can go to. Note: Volume 80 is unity gain, (what comes in goes out) any higher volume may distort the audio. HEADPHONES This can make your headphone output quieter or louder for that volume setting. This can be adjusted so that with quiet headphones if you unplug them the speaker volume is not too loud at the same volume setting. LOWER ANALOG OUTPUT This is done to provide a finer volume control. That is, the audio output is attenuated but you will have a smaller change in audio volume for each step in the Volume control.

PRIVACY

Send Anonymous Usage Stats Enable to allow your Linn DS/DSM to send usage data to Linn. This will help us decide where to allocate time for new features or improvements.

NOTE: No personal information is sent to Linn as a result of this option being checked.

Send Crash Reports Enable to allow your Linn DS/DSM to send crash data to Linn in the event of a failure. This will help us in diagnosing and fixing existing issues. This is used by the Linn Helpline and Service department to check and what has caused the Linn DS/DSM to reboot itself.

If you select No this makes it more difficult to help diagnose remotely what has happened to your product.

NOTE: No personal information is sent to Linn as a result of this option being checked.

REMOTE CONTROL

BUTTONS This is for use with the REM020 Remote control and select which button on this remote control will select which source. ACCEPTED COMMANDS The Linn DS/DSM use Philips RC5 remote control protocol. This will mean that some other manufacturers remote control may also control the Linn DS/DSM. This option will tell the Linn DS/DSM what commands to accept.

HDMI

The options are only a review what MAY be available on your Linn DS/DSM. All Linn DSM with HDMI input sockets HDMI Totally disable HDMI sockets from operation Pass-Through (Sleep) When the Linn DSM is in Sleep mode the last HDMI audio/video is passed through to TV/Projector. "HDMI 2.0"/"ARC only" Products Turn HDMI Off in Sleep When enabled this will stop HDMI connection to the TV/Projector when the Linn DSM in in Sleep. CEC Enable Consumer Electronics Control of the Linn DSM CEC Source Select Enable to auto switch to TV ARC connection if CEC commands are available.

ADVANCED

The options are only a review what MAY be available on your Linn DS/DSM. Video Sync Delay(ms): When a source/input has "Video Sync" delay this is the delay used. This can also be adjusted by the IR handset. REAR LEDS Ethernet LEDs: When disabled these ethernet sockets will turn OFF after intial boot-up/power ON. Exakt LEDs: When disabled these Exakt sockets on the rear of the Linn DS/DSM will turn OFF after intial boot-up/power ON. SONGCAST Songcast: Turned OFF the Linn DS/DSM will no longer share its Music to other Rooms. Protocol Multicast: This is a network dependant setting and should only be changed if the network/LAN can support this. Unicast': Default setting. This allows this Linn DS/DSM audio to be shared with up to FIVE Songcast rooms. Songcast Port: This should NOT be adjusted and only used for reference to network used. REMOVE MUSIC SYSTEM This will remove the Linn DS/DSM from your Linn Account and allow to be attached to another Linn Account.

DEVELOPER

Ignore this section, this is for software development.

SHARING KONTROL

You can share your Linn DS/DSM to another Linn-Account. This can be used for Retailers to give remote support for their customers. This is done by the customer granting access to the Retailer, or vice-versa. But note that if the Linn DS/DSM is reset to Factory Defaults <RESTORE>, this action will remove the Linn DS/DSM from ALL Linn accounts.

Click on the and select

SHARE CONTROL with another Linn Account.

• Add the Linn Account emails and your name to the other Linn account.
• You can choose to share this linn DS/DSM for a limited time 12hours/48hours or forever-Indefinite. Or until the Linn DS/DSM has a factory reset-RESTORE.
• You can also share control of this Linn DS/DSM with other Linn Accounts by repeating the SHARE CONTROL button and each time stating a new Linn Account

REMOVE: to remove this Linn DS/DSM from your Linn Account.

MANAGE ACCESS: If you have shared your Linn DS/DSM with another Linn Account(s) then you can selectively REVOKE/remove these Accounts access to your Linn DS/DSM.

END ACCESS: If you have been granted access to another Linn-Accounts Linn DS/DSM you can remove access from you Linn Account

Signifie that this Linn DS/DSM has shared control by more than one Linn Account. If shared TO this account then it states who has shared it.

In the example below:

Merlin Kustom DSM: is linked to the current Linn Account only

Merlin Lounge: is linked to the current Linn Account AND SHARED with another Linn Account. You can shared this to multiple Linn Accounts and well as be removed from other Linn Account(s).Or finally remove this Linn DS/DSM from your account.

TV Room: has been SHARED with this Linn Account. This only has the option to return full Konfiguration to the original Linn Account

---

Filtering the Music systems using the Linn Account that has be shared from/to

If you have a lot of Music systems to manage and you have either been given sharing access. Or you have shared with another Linn Account you can filter the listing.

Press the to open the filter window and select the Linn Account to up wish to see.

---

FAQ's

My Linn DS/DSM will only shows offline even though it is power on

This can be caused by a loss of internet access on the Linn DS/DSM.
Try the following:

1. Power cycle the Linn DS/DSM. That is, remove mains power from the Linn DS/DSM for a minimum of 30seconds and reapply mains.
2. Wait for approx 5minutes for the Linn DS/DSM to power on and do house-keeping.
3. On the manage systems web-browser press F5 ot SHFT-F5 to refresh screen.
   

How do I remove a Linn DS/DSM from my Linn Account

There are THREE ways to do this:
1. If you are on the same network as the Linn DS/DSM then:

a) go into Kazoo Settings > Linn Account and log in to the Linn Account that currently has the Linn DS/DSM

b) This will give a list of Linn DS/DSM on this network and REMOVE the required Linn DS/DSM.

c) Complete

2. If you do not have access the Linn Account that the Linn DS/DSM is linked to:

a) Open Konfig

b) Goto the ADVANCED tab

c) Select the Linn DS/DSM to be unlinked from the Linn Account and hit the <RESTORE>. This will do a factory reset on the Linn DS/DSM and remove this from the Linn Account.

3. If the Linn DS powered off and is on your Linn Account and you want unlink it from your Account:

a) Open Manage account

b) Select the Linn DS/DSM you want to remove. If the room is OFF (that is, no mains power), the web-page will state that the Room is offline. This page will also give you the option to REMOVE MUSIC ROOM. Select this option to unlink this Linn DS/DSM from your Linn Account.