Difference between revisions of "Klimax DSM (KATALYST Variant)"
(→Back Panel Connections) |
(→Back Panel Connections) |
||
| Line 66: | Line 66: | ||
# '''TOSLINK IN'''- To connect sources with Toslink (optical) digital outputs. | # '''TOSLINK IN'''- To connect sources with Toslink (optical) digital outputs. | ||
# '''ETHERNET''' - To connect to a network. | # '''ETHERNET''' - To connect to a network. | ||
| − | # '''SPDIF IN''' - | + | # '''SPDIF IN or SPDIF OUT''' - Configured in Konfig as either an digital input or digital output. (Default: Input) |
# [[Exakt_link |'''EXAKT LINK''']]- To connect to Exakt compatible devices | # [[Exakt_link |'''EXAKT LINK''']]- To connect to Exakt compatible devices | ||
# '''EARTH GROUND''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions. | # '''EARTH GROUND''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions. | ||
Revision as of 11:13, 30 November 2016
Contents
Getting Started
Product info
- Product Name: Klimax DSM/2
- Date of Introduction: Sept 2016
- Type: Integrated digital music player and preamplifier
- Product Information sheet
- Features
- Katalyst DAC Architecture
- DS Design
- Dynamik Power Supply
- 192k/24bit Analogue to Digital convertion for Analogue input
Support
Latest software
Manuals
Network Setup
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- TOSLINK IN- To connect sources with Toslink (optical) digital outputs.
- ETHERNET - To connect to a network.
- SPDIF IN or SPDIF OUT - Configured in Konfig as either an digital input or digital output. (Default: Input)
- EXAKT LINK- To connect to Exakt compatible devices
- EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
- BALANCED IN RIGHT, LEFT - To connect sources with balanced (XLR) outputs. 1 2
- BALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.2
- UNBALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.2
- HDMI OUT - To connect to a display device with HDMI 1.4 & 2.0 inputs.
- HDMI IN 1, 2, 3 - To connect sources with HDMI 1.4 & 2.0 outputs.
- FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).
1 XLR to RCA adaptors are supplied for connecting sources with unbalanced outputs.
Input transformer can be enabled or disabled in Konfig setup
Note: Configuring to RCA will add a ground link to the audio tranformer causing an imbalance in the HOT and COLD XLR connections
2 Set to DELAY mode > DIRECT to pass through an Analogue volume control to the Analogue out.
Only use the XLR(8) output OR the RCA(9) output, never use both outputs as the RCA will degrade the XLR(8) output audio.
EXAKT LINK connection
Check HERE for information of Exakt link connection
Front Panel
- DISPLAY
- ON / OFF SWITCH
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
For further assistance, try our customer support pages or the Linn Forum.
Exakt Options
Exakt usage the the Exakt Klimax speakers can be found at Klimax Exakt System
Trouble shooting
Check Exakt trouble shooting
