Difference between revisions of "Kiko DSM information"

MAINS INPUT - To connect to the mains electricity supply.
FALLBACK - To put the device into Fallback mode (used when reprogramming)
ETHERNET - To connect to a network (100Base-T)
HDMI OUTPUT - To connect to a display device with HDMI 1.4 inputs.
HDMI INPUTS - To connect sources with HDMI 1.4 outputs.
DIGITAL INPUT (Toslink) - To connect sources with Toslink (optical) digital outputs.
DIGITAL INPUT (Spdif) - To connect sources with Spdif (RCA) digital outputs.
ANALOGUE INPUT (line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.
SPEAKER OUTPUTS - To connect to loudspeakers

Front Panel Connections

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

Check:

For further assistance, try our customer support pages

@@ Line 55: / Line 55: @@
 [[Image:Kiko_DSM_rear_1-1.jpg|center|700px]]
-# '''MAINS INPUT''' - To connect to the mains electricity supply.
+# {{link:MAINS INPUT}}
-# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming).
+# {{link:FALLBACK}}
-# '''ETHERNET''' - To connect to a network.
+# {{link:ETHERNET}}
 # '''HDMI OUTPUT''' - To connect to a display device with HDMI 1.4 inputs.
 # '''HDMI INPUTS''' - To connect sources with HDMI 1.4 outputs.