Difference between revisions of "Template:Backpanel:Akurate DSM/3"

From LinnDocs
Jump to: navigation, search
m
m
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Image:Akurate DSM 1 rear.jpg|center|700px]]
+
[[Image:Akurate DSM 1 rear.jpg|center|700px|link=]]
 
#{{link:MAINS INPUT}}
 
#{{link:MAINS INPUT}}
 
# {{link:FALLBACK}}
 
# {{link:FALLBACK}}
 
# {{link:ETHERNET}}
 
# {{link:ETHERNET}}
 
# {{link:EXAKTLINK}}
 
# {{link:EXAKTLINK}}
# '''ANALOGUE INPUTS''' (XLR, line level) - To connect sources with balanced (XLR) outputs.
+
# '''ANALOGUE INPUTS''' (XLR, line level) - To connect an analogue source with balanced (XLR) outputs.
# '''ANALOGUE INPUTS''' (RCA, phono/line level) - To connect a turntable or line level<sup>4</sup> source with unbalanced (RCA) outputs.<sup>1 & 2</sup> (Default MC phono)
+
# '''ANALOGUE INPUTS''' (RCA, line level / phono) - To connect a line level or turntable analogue source with unbalanced (RCA) outputs.<sup>1</sup>
 
# '''PHONO GROUND''' - To connect to a turntable grounding terminal.  
 
# '''PHONO GROUND''' - To connect to a turntable grounding terminal.  
 
# '''ANALOGUE OUTPUTS''' (XLR,variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.
 
# '''ANALOGUE OUTPUTS''' (XLR,variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.
Line 13: Line 13:
 
# '''DIGITAL INPUTS''' (Toslink) - To connect sources with Toslink (optical) digital outputs.
 
# '''DIGITAL INPUTS''' (Toslink) - To connect sources with Toslink (optical) digital outputs.
 
# '''DIGITAL OUTPUT''' (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
 
# '''DIGITAL OUTPUT''' (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
# '''HDMI INPUTS''' - To connect sources with 1.4 & 2.0<sup>3</sup> HDMI outputs.
+
# '''HDMI INPUTS''' - To connect sources with HDMI outputs <sup>2</sup>  
# '''HDMI OUTPUT''' - To connect to a display device with 1.4 & 2.0<sup>3</sup> HDMI inputs.
+
# '''HDMI OUTPUT''' - To connect to a display device with HDMI inputs <sup>2</sup> and [[HDMI#HDMI_ARC|<u>HDMI-ARC</u>]]
 
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
 
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
  
 
<br>
 
<br>
  
'''<sup>1</sup>''' Input 3 is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line-level input.<br>
+
'''<sup>1</sup>''' Input 2 is line level only. Input 3/PH is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line level input.<br>
'''<sup>2</sup>''' Analogue inputs (including front panel AUX IN),  can be pass through an Analogue volume control to the Analogue out when Delay mode set to DIRECT on these inputs.<br>
+
'''<sup>2</sup>''' {{link:Notes HDMI2}}<br>
'''<sup>3</sup>''' Supports HDCP 2.2 up to and including 60Hz UHD. We recommend using [https://www.hdmi.org/manufacturer/premiumcable/Premium_HDMI_Cable_Certification_Program.aspx HDMI Certified ]cables<br>
+
'''<sup>4</sup>''' This input can be adjusted for different Phono stages or Line level by reconfiguring a circuit board within the Linn DS.
 
  
 
<br><br>
 
<br><br>

Latest revision as of 07:20, 10 July 2023

Akurate DSM 1 rear.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  3. ETHERNET - To connect to a network (100Base-T)
  4. EXAKT LINK - To connect to Exakt compatible devices (Exaktbox, Exakt Speakers, Urika II etc)
  5. ANALOGUE INPUTS (XLR, line level) - To connect an analogue source with balanced (XLR) outputs.
  6. ANALOGUE INPUTS (RCA, line level / phono) - To connect a line level or turntable analogue source with unbalanced (RCA) outputs.1
  7. PHONO GROUND - To connect to a turntable grounding terminal.
  8. ANALOGUE OUTPUTS (XLR,variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.
  9. ANALOGUE OUTPUTS (RCA, variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
  10. DIGITAL INPUTS (Spdif) - To connect sources with Spdif (RCA) digital outputs.
  11. DIGITAL OUTPUT (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.
  12. DIGITAL INPUTS (Toslink) - To connect sources with Toslink (optical) digital outputs.
  13. DIGITAL OUTPUT (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
  14. HDMI INPUTS - To connect sources with HDMI outputs 2
  15. HDMI OUTPUT - To connect to a display device with HDMI inputs 2 and HDMI-ARC
  16. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.


1 Input 2 is line level only. Input 3/PH is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line level input.
2 HDMI Premium certification.pngLinn recommend using Premium High Speed Certifiied HDMI cables for an optimal experience. (supporting HDCP 2.2 up to and including 60Hz UHD.)