Difference between revisions of "Majik DSM (HDMI 2 Variant)"

From LinnDocs
Jump to: navigation, search
m (Back Panel Connections)
m (Back Panel Connections)
Line 76: Line 76:
 
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming)
 
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming)
 
# '''ANALOGUE INPUTS''' (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs. Input 4 is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).
 
# '''ANALOGUE INPUTS''' (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs. Input 4 is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).
# '''ANALOGUE OUTPUTS/INPUTS''' (RCA, variable level) This is configurable in Konfig
+
# '''ANALOGUE OUTPUTS/INPUTS''' (RCA, variable level) This is configurable in Konfig<sup>2</sup>
 
##To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs  (Default)
 
##To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs  (Default)
 
##or use in internal Majik DSM power amplifer for use with an Exakt Crossover.  
 
##or use in internal Majik DSM power amplifer for use with an Exakt Crossover.  
Line 84: Line 84:
 
<br>
 
<br>
 
'''<sup>1</sup>''' Supports HDMI 2.3 up to and including 60Hz UHD. We recommend using [https://www.hdmi.org/manufacturer/premiumcable/Premium_HDMI_Cable_Certification_Program.aspx HDMI Certified ]cables<br>
 
'''<sup>1</sup>''' Supports HDMI 2.3 up to and including 60Hz UHD. We recommend using [https://www.hdmi.org/manufacturer/premiumcable/Premium_HDMI_Cable_Certification_Program.aspx HDMI Certified ]cables<br>
 
+
'''<sup>2</sup>''' Konfig settings for
 +
:::'''Pre Out/Power In Connector Mode''' to be set to '''OUTPUT''' (default: INPUT)
 +
:::'''DUAL Analogue/Exakt Stereo''' to be set to '''ENABLED''' (default: DISABLED)
 
<br>
 
<br>
  

Revision as of 14:07, 28 March 2018

MajikDSM Blk 3QLeft RGB web.jpg

Getting Started

www.linn.co.uk/go/majik

Product info

  • Product Name: Majik DSM/3
  • Date of Introduction: Sept 2016
  • Type: Integrated digital music player, preamplifier and power amplifier

Support

Linn Support Site

Latest software

Latest software releases

Open source software

Manuals

Quickstart Guide

Konfig manual

Kinsky Desktop manual

DSM Remote control manual

Space Optimisation+

Space Optimisation (Advanced)

Surround Sound

Safety Information

Warranty Terms & Conditions

Third Party Software Copyright

Network Setup

DS Budget System Setup

DS Entry Level System Setup

DS High End System Setup

Back Panel Connections

Image:Majik_DSM_rear_Exakt.jpg‎


  1. MAINS INPUT - To connect to the mains electricity supply.
  2. HDMI INPUTS - To connect sources with 1.4 & 2.31 HDMI outputs
  3. HDMI OUTPUT - To connect to a display device with 1.4 & 2.31 HDMI/HDMI ARC inputs.
  4. EARTH GROUND - To connect to a turntable grounding terminal, or an earthing terminal if no mains earth is available, or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
  5. DIGITAL INPUTS (Spdif) - To connect sources with Spdif (RCA) digital outputs.
  6. DIGITAL OUTPUT (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.
  7. DIGITAL INPUTS (Toslink) - To connect sources with Toslink (optical) digital outputs.
  8. DIGITAL OUTPUT (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
  9. ETHERNET - To connect to a network.
  10. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  11. ANALOGUE INPUTS (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs. Input 4 is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).
  12. ANALOGUE OUTPUTS/INPUTS (RCA, variable level) This is configurable in Konfig2
    1. To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs (Default)
    2. or use in internal Majik DSM power amplifer for use with an Exakt Crossover.
  13. ANALOGUE OUTPUTS (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.
  14. SPEAKER OUTPUTS - To connect to loudspeakers
  15. EXAKT LINK - To connect to Exakt compatible devices


1 Supports HDMI 2.3 up to and including 60Hz UHD. We recommend using HDMI Certified cables
2 Konfig settings for

Pre Out/Power In Connector Mode to be set to OUTPUT (default: INPUT)
DUAL Analogue/Exakt Stereo to be set to ENABLED (default: DISABLED)


EXAKT LINK connection

Check HERE for information of Exakt link connection



Front Panel Connections

Majik DSM front.jpg
  1. MUTE BUTTON - Mutes/unmutes the audio
  2. FRONT PANEL DISPLAY
  3. SLEEP BUTTON - Brings the unit in/out of sleep mode
  4. VOLUME ADJUST BUTTONS - Changes the volume up/down
  5. HEADPHONE OUTPUT (3.5mm stereo) - To connect to headphones
  6. AUXILIARY SOURCE INPUT (3.5mm stereo) - To connect to an analogue stereo audio source
  7. SOURCE SELECT BUTTONS - Changes to the previous/next source
  8. POWER SWITCH- Switches the power on/off.


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.


Trouble shooting

Check Exakt trouble shooting


For further assistance, try our customer support pages or the Linn Forum.