Difference between revisions of "DS High End System"

From LinnDocs
Jump to: navigation, search
m
 
(31 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
;<big>NOTE: This page is retired as this was created in the days when we still had modems, low speed internet and poor Wifi. Due to many updates in the Linn DS, Ethernet/Internet world and components this information is obsolete, but kept for reference.<br>
 +
Plug the Linn DS/DSM/HUB into your LAN and it will work.</big>
 +
;(If you don't know what a modem is, then this proves how old this page is! [[File:Emoji-wink.png|30px]] )
 
==Introduction==
 
==Introduction==
  
Line 10: Line 13:
  
 
It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.
 
It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.
 +
 +
  
 
==Required Components==
 
==Required Components==
Line 15: Line 20:
 
The following components are required for the system detailed in this page:
 
The following components are required for the system detailed in this page:
  
*ISP router
+
*Internet Service Provider (ISP) router
 
*Router
 
*Router
 
*Computer
 
*Computer
Line 22: Line 27:
 
*Network switch
 
*Network switch
 
*Wireless access point (WAP)
 
*Wireless access point (WAP)
*Wireless control  
+
*Wireless control point
  
 
Notes:  
 
Notes:  
 
# Ethernet cables are required to connect devices
 
# Ethernet cables are required to connect devices
# Router is required to have a WAN port and feature address reservation
+
# Router is required to have a WAN port
# NAS is required to have media server software  
+
# NAS is required to have UPnP media server software preinstalled
 
# WAP should have 'N' band support
 
# WAP should have 'N' band support
 
 
  
 
==Step 1: Connect Router To ISP Router==
 
==Step 1: Connect Router To ISP Router==
  
#Connect the router to the ISP router
+
#Connect the ISP router to the WAN port on the router
 
#Power on the ISP router
 
#Power on the ISP router
 
#Power on the router
 
#Power on the router
Line 59: Line 62:
 
#Connect the computer to the network switch.  
 
#Connect the computer to the network switch.  
 
#Power on the computer
 
#Power on the computer
#Configure the router to the [[DS Network Setup:Configuring the Router|'''recommended settings''']]
+
#Configure the router to issue IP addresses in a suitable range
  
  
Line 67: Line 70:
  
  
The computer’s network adapter should already be configured to ‘'''obtain an IP address automatically'''’.
+
The network adapter on the computer should already be configured to ‘'''obtain an IP address automatically'''’.
  
#Test that the computer has internet access
+
==Test Step==
 +
*Test that the computer has internet access
 
#Download Konfig [http://www.linn.co.uk/konfig  here]
 
#Download Konfig [http://www.linn.co.uk/konfig  here]
 +
#Install Konfig onto the computer
 +
 +
 +
 +
==Step 4: Connect Linn DS To Network Switch==
 +
 +
#Connect the Linn DS to the network switch
 +
#Power on the Linn DS
 +
 +
 +
 +
[[Image:High4.1.2.png|centre]]
 +
 +
 +
 +
==Test Step==
 +
*Test that the Linn DS appears on the network
 +
#Open Konfig
 +
#Check that the Linn DS is discovered in Konfig
  
  
  
==Step 4: Connect NAS to Network Switch==
+
==Step 5: Connect NAS to Network Switch==
  
 
#Connect the NAS to the network switch  
 
#Connect the NAS to the network switch  
Line 85: Line 108:
  
  
==Step 5: Connect Linn DS To Network Switch==
+
The network adapter on the NAS should already be configured to ''''obtain an IP address automatically''''.
  
#Connect the Linn DS to the network switch
 
#Power on the Linn DS
 
  
  
 +
==Step 6: Install Linn DS Control Software On Computer==
  
[[Image:High4.png|centre]]
+
#Download and install Kazoo from [http://www.linn.co.uk/Kazoo  here]
 +
#View the Kazoo manual [[Kazoo_Manual|here]]
  
 +
==Test Step==
 +
*Test that the Linn DS plays music
 +
#Open Kazoo
 +
#Select the Linn DS
 +
#Select Radio from the list of available sources
 +
#Highlight and play any radio station; the timer will start to count when the radio station is playing<br><br>
  
 
+
'''Note: To hear music, the Linn DS must be connected to a hi-fi system'''
==Step 6: Install Linn DS Control Software On Computer==
 
 
 
#Download Kinsky Desktop from [http://www.linn.co.uk/kinskydesktop  here]
 
#Install Kinsky Desktop onto the computer
 
#View the Kinsky Desktop manual [http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual here]
 
  
  
Line 106: Line 130:
 
==Step 7: Connect Wireless Access Point==
 
==Step 7: Connect Wireless Access Point==
  
#Connect WAP to the router
+
#Connect the WAP to the router
  
 +
==Test Step==
 +
*Install Kazoo on the wireless control point and check that you can control the Linn DS
  
  
Line 119: Line 145:
  
 
[[DS_Entry_Level_System | DS Entry Level System]]
 
[[DS_Entry_Level_System | DS Entry Level System]]
 +
 +
[[Networking_Glossary | Networking Glossary]]
 +
 +
[[Network_Components | Network Components]]
 +
 +
<!--[Multicast_Filtering#Tested_Devices | Multicast Filtering Tested Devices]]-->
 +
 +
[[Linn_DS/DSM_Network_requirements|Linn DS/DSM Network requirements]]

Latest revision as of 15:59, 20 November 2020

NOTE: This page is retired as this was created in the days when we still had modems, low speed internet and poor Wifi. Due to many updates in the Linn DS, Ethernet/Internet world and components this information is obsolete, but kept for reference.

Plug the Linn DS/DSM/HUB into your LAN and it will work.

(If you don't know what a modem is, then this proves how old this page is! Emoji-wink.png )

Introduction

This is a recommended guide to setting up a high end Linn DS system, requiring all of the specified network components to be purchased, ensuring that they meet the stated specifications.


High6.png


It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.


Required Components

The following components are required for the system detailed in this page:

  • Internet Service Provider (ISP) router
  • Router
  • Computer
  • Linn DS
  • NAS
  • Network switch
  • Wireless access point (WAP)
  • Wireless control point

Notes:

  1. Ethernet cables are required to connect devices
  2. Router is required to have a WAN port
  3. NAS is required to have UPnP media server software preinstalled
  4. WAP should have 'N' band support

Step 1: Connect Router To ISP Router

  1. Connect the ISP router to the WAN port on the router
  2. Power on the ISP router
  3. Power on the router


High1.1.png


Step 2: Connect Router To Network switch

  1. Connect the router to the network switch
  2. Power on the network switch


High1.png


Step 3: Connect Computer To Network Switch

  1. Connect the computer to the network switch.
  2. Power on the computer
  3. Configure the router to issue IP addresses in a suitable range


High2.png


The network adapter on the computer should already be configured to ‘obtain an IP address automatically’.

Test Step

  • Test that the computer has internet access
  1. Download Konfig here
  2. Install Konfig onto the computer


Step 4: Connect Linn DS To Network Switch

  1. Connect the Linn DS to the network switch
  2. Power on the Linn DS


High4.1.2.png


Test Step

  • Test that the Linn DS appears on the network
  1. Open Konfig
  2. Check that the Linn DS is discovered in Konfig


Step 5: Connect NAS to Network Switch

  1. Connect the NAS to the network switch
  2. Power on the NAS


High3.png


The network adapter on the NAS should already be configured to 'obtain an IP address automatically'.


Step 6: Install Linn DS Control Software On Computer

  1. Download and install Kazoo from here
  2. View the Kazoo manual here

Test Step

  • Test that the Linn DS plays music
  1. Open Kazoo
  2. Select the Linn DS
  3. Select Radio from the list of available sources
  4. Highlight and play any radio station; the timer will start to count when the radio station is playing

Note: To hear music, the Linn DS must be connected to a hi-fi system


Step 7: Connect Wireless Access Point

  1. Connect the WAP to the router

Test Step

  • Install Kazoo on the wireless control point and check that you can control the Linn DS


High5.png


Links to Other Systems

DS Budget System

DS Entry Level System

Networking Glossary

Network Components


Linn DS/DSM Network requirements