Difference between revisions of "DS & REM 019"

From LinnDocs
Jump to: navigation, search
m (Source selection)
Line 25: Line 25:
 
# - second external source (SPDIF on the Sekrit-DSI, Analog2 on the Majik DSi etc)
 
# - second external source (SPDIF on the Sekrit-DSI, Analog2 on the Majik DSi etc)
 
# - third external source (Toslink on the Sekrit-DSI, Analog3 on the Majik DSi etc)
 
# - third external source (Toslink on the Sekrit-DSI, Analog3 on the Majik DSi etc)
 +
 +
 +
 +
 +
  
  

Revision as of 13:54, 5 August 2011

Linn Remote Control Handset Operation with Linn DS

The following functionality is available on all Linn DS devices with Infra-Red (IR) controllability. If IR is not currently enabled on the Linn DS then this can be done via Linn Konfig.


Enable IR on the Linn DS

  • Open Linn Konfig.
  • Select the Linn DS.
  • Select the Configuration tab.
  • Set Handset Commands Accepted to All, Dvd or Cd depending on user requirement.



Source selection

Handset Keys - click to enlarge

The Linn DS/DSI can be used to select sources on your Linn connected Preamlifier. This is performed using the number keypad.

Press AMP followed by the Linn DS/DSI input number

  1. - Playlist input
  2. - Radio input
  3. - UpnpAV input
  4. - Songcast input
  5. - First external source (Analog on the Sekrit-DSI, Analog1 on the Majik DSi etc)
  6. - second external source (SPDIF on the Sekrit-DSI, Analog2 on the Majik DSi etc)
  7. - third external source (Toslink on the Sekrit-DSI, Analog3 on the Majik DSi etc)





Handset Keys - click to enlarge

Configure the Linn Remote Control Handset to work with the Linn DS

The Line Remote Control Handset should be configured for DVD commands or CD commands depending on user requirement.

  • Press Dvd.jpg to enable DVD commands.
  • Press Shift.jpg then Dvd.jpg to enable CD commands.





Playlist Source

The Linn Remote Control Handset will be able to access any playlist that is currently loaded onto the Linn DS via a Linn compliant control point.

The playlist will remain loaded on the Linn DS until it is cleared via a Linn compliant control point or if the Linn DS is power cycled or the reboot command is selected from Konfig.

Ensure that the Linn Remote Control Handset is configured to work with the Linn DS ..here



Handset Keys - click to enlarge

Playing music from the playlist source

  • Load a playlist onto the Linn DS via a Linn compliant control point.
  • Press Subt.jpg to select the Playlist source.
  • Press Play.jpg to play music from the playlist.








Handset Keys - click to enlarge

Direct track selection using numerical keys

  • Load a playlist onto the Linn DS via a Linn compliant control point .
  • Press any of the numerical keys to select the corresponding track.
  • To enter a track number in double figures simply press the required numbers in succession.
  • Once a track number is entered after 2 seconds it will be selected.
  • Press Select.jpg after the track number is entered to immediately select the track.
  • PressLeft.jpgto erase the digit if the wrong number is entered.





Handset Keys - click to enlarge

Navigating through the playlist

  • Press Fastforward.jpg for fast search forward or Fastrewind.jpg for fast search backwards.
  • Press Skipforward.jpg for next track selection or Skipback.jpg for previous track selection.








Handset Keys - click to enlarge

Stopping or pausing the music

  • Press Stop.jpg to stop the music playing.
  • Press Pause.jpg to pause the music.








Radio Source

The Linn Remote Control Handset can be used to access the Radio Source through the Linn DS.

When listening to the Radio Source a good quality Internet connection is required.

By default the Linn DS presets will be set to the Linn provided Worldwide account.

Ensure that the Linn Remote Control Handset is configured to work with the Linn DS ..here



Handset Keys - click to enlarge

Playing audio and selecting presets from the Radio source

  • Press Zoom.jpg to select the Radio source.
  • Press any of the numerical keys to select the corresponding preset.
  • To enter a preset number in double figures simply press the required numbers in succession.
  • Once a preset number is entered after 2 seconds it will be selected.
  • Press Select.jpg after the preset number is entered to immediately select the preset.
  • PressLeft.jpgto erase the digit if the wrong number is entered.




Handset Keys - click to enlarge

Navigating through the presets

  • Press Skipforward.jpg for next preset selection or Skipback.jpg for previous preset selection.










Handset Keys - click to enlarge

Stopping or re-selecting audio from the preset

  • Press Stop.jpg or Pause.jpg to stop audio from the preset.
  • Press Play.jpg to re-select the preset.








Create and customise your own radio presets

  • You can create and customise your own list of radio presets using Tunein Radio (previously RadioTime). Click here to find out how.