Template:Backpanel:Klimax DSM/1-2 OragnikU

1. MAINS INPUT - To connect to the mains electricity supply.
2. TOSLINK IN- To connect sources with Toslink (optical) digital outputs.
3. ETHERNET - To connect to a network (100Base-T)
4. SPDIF IN or SPDIF OUT - Configured in Manage Systems as either a digital input or digital output. (Default: Input)
5. EXAKT LINK - To connect to Exakt compatible devices (Exaktbox, Exakt Speakers, Urika II etc)
6. EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
7. BALANCED IN RIGHT, LEFT - To connect sources with balanced (XLR) outputs.
8. BALANCED OUT RIGHT, LEFT ^3,5 - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.
9. UNBALANCED OUT RIGHT, LEFT .^4,5 - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs
10. HDMI OUTPUT - To connect to a display device with 1.4 & 2.0² HDMI/HDMI ARC inputs.
11. HDMI INPUTS - To connect sources with 1.4 & 2.0² HDMI outputs.
12. FALLBACK - To put the device into Fallback mode (used when reprogramming)

¹ XLR to RCA adaptors are supplied for connecting sources with unbalanced outputs.
² Linn recommend using Premium High Speed Certifiied HDMI cables for an optimal experience. (supporting HDCP 2.2 up to and including 60Hz UHD.)

³ Output voltage 4 V RMS (0 dBFS , vol. 80) - Output impedance 300 Ω
⁴ Output voltage 2 V RMS (0 dBFS , vol. 80) - Output impedance 300 Ω via isolation transformers
⁵ XLR & RCA are independent outputs sharing the same volume & mute controls, but CANNOT be disabled independently.