Template:Upgrades Hardware:Selekt DSM

From LinnDocs
Revision as of 14:42, 26 September 2024 by Yoda (talk | contribs)
Jump to: navigation, search

Selekt DSM Hardware Upgrades

*Selekt single-channel line-out cartridge - Single channel pre-amplifier line level audio cartridge that can be used in Mono playback.Must be used in pairs. However, these can be used in a Surround sound channel setup. Only using a pair of Mono cartidges in the Selekt DSM and the remaining surround channels must be assigned to Exaktbox(es) and/or Exakt speakers.
*Selekt 2-channel line-out cartridge - 2 channel pre-amplifier line level audio cartridge that can be used in Stereo or assigned a Surround sound channel setup.
*Selekt 2-channel power amplifier cartridge - 2 channel Power amplifier cartridge that can be used in Stereo, Bi-Amp, Tri-Amp or assigned a Surround sound channel setup
*Selekt combined/hybrid power amplifier and line-out cartridge - 2 channel cartrdige with:
* One channel for Line-level playback (for Sub-Woofer) and
* One channel for Power Amplifier Centre Channel playback. (This is designed to be used with other Selekt Power Amplfier cartridges.)
*Selekt Standard DAC module - DAC module using the standard DAC
*Selekt Katalyst DAC module - DAC module using the Katalyst DAC
*Selekt Organik DAC module - DAC module using the Organik DAC
*Selekt HDMI Switching module & Linn Surround module - This allows the addition of HDMI switching and a further upgrade to Surround sound

Note:

  • It should be noted that information may at times be out of date and should not be used as a current list of what is upgrades available.
  • Adding more than one cartridge and/or an HDMI switching module on early Selekt DSM's may require a power supply upgrade. Please information can be found by your Linn Retailer at time of ordering.
  • Warning: Changing Selekt Cartidge(s) or Module(s).
Applies to: All Selekt DSM variants
To reduce the risk of damage to your Selekt DSM:
  • The Selekt DSM MUST be disconnected from Mains power supply by BEFORE any cartridge(s) or module(s) are removed/Inserted.