Technical Specification:Klimax Solo 800/0

	Power_Amplifier/Klimax_Solo_800 '''''Linn Klimax Solo 800 Mono Power Amplifier'''''
Overview	• Product Name: KLIMAX SOLO 800 • Date of Introduction: January 2024 • Type: Mono Power Amplifier Class A/B
Dimensions	(H) 268 mm x (W) 350 mm x (D) 412 mm (H) 10.6 inches x (W) 13.8 inches x (D) 16.3 inches
Weight	27 kg / 59.6 lb
Mains supply voltage	(auto ranging) 100–120 V ac (±10%) 50–60 Hz 200–240 V ac (±10%) 50–60 Hz
Power consumption	Sleep 15 W
Power continuous	typically 200W but dependant on cartridges used
Supported file types	FLAC, WAV, MP3, AAC, AIFF/AIFC, ALAC, OGG/VORBIS, WMA, DSD (DSF and DFF)
Audio sample rates	7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24 k,29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k, 384 k (Organik only)
Word depths	16–24 bits
Control protocol	Compatible with UPnP™ media servers, UPnP™ AV 1.0 control points
Ethernet	100Base-T RJ45
EXAKT	2off
inputs	1off Ethernet
	1off Wifi Supports IEEE 802.11a/b/g/n/ac PSK/CCMP 1-CH
	1off Bluetooth Bluetooth v4.2 Audio is transferred using SBC encoding This is not natively compatible with Googlecast.
	1off HDMI ARC
	1off RCA Line level, Input sensitivity Selectable: 1 / 2 / 4 Vrms Input impedance - 50 kΩ
	1off MM Phono, max voltage (1kHz): 67mV rms. (Gain +40dB), Input impedance 47kΩ, 100pf
	1off MC Phono, max voltage(1kHz): 5.5mV rms (Gain +54dB), Input impedance 100Ω 470pf
	2off Toslink Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
	2off SPDIF Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Nominal input voltage 0.5 V peak
	1off USB Audio Class 2 Support sample rates 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
	2off Exakt-Link
Sources	LAN Internet radio Tidal Qobuz Calm Radio Spotify Connect NetAux
AUDIO OUTPUTS (3 slots for Line and Power cartridges)	2-channel Line level analogue pre-amplifier output cartridge for Linn Selekt DSM A DAC must be installed in this module
	2-channel power amplifier cartridge for Linn Selekt DSM - A DAC must be installed in this module
	1.1 channel pre and power amplifier cartridge for Linn Selekt DSM A DAC must be installed in this module
	2 x Sub-woofer outputs (Only for Stereo playback give 2.1,ch playback) (Bass Reinforcement or Redirect)
	Exakt-Link
	1 x SPDIF (Can be configured as a fixed volume Stereo digital output)
	1/4in / 6.3mm headphone jack
1 x HDMI Cartridge slot	SELEKT HDMI SWITCHING MODULE Upgrade options for HDMI Switching module Linn Surround Module