Selekt:Exakt crossover for Aktiv 2/3-way
Revision as of 13:08, 13 July 2023 by Yoda (talk | contribs) (Created page with ":The Selekt DSM has Stereo 3-Way <u>Exakt Engine</u>. This allows you to use the Selekt DSM as 2-way or 3-way Exakt Crossover <!-...")
- The Selekt DSM has Stereo 3-Way Exakt Engine. This allows you to use the Selekt DSM as 2-way or 3-way Exakt Crossover
- In Linn Account Manage systems go into the GENERAL tab and open the "Network Player" page. Finally go to Change Configuration and select the required loudspeaker;
- These are examples of wiring a Exakt Crossover system in different Amplifier configurations:
- Each Selekt power amplifier output drive each loudspeaker drive unit seperately.
- The loudspeaker must be made Externally Aktiv and any shorting links/bridging strip across the loudspeaker back panel MUST be removed according to the amplifier/speaker wiring. Please refer to a Linn Retailer to ensure that this is done correctly
![Tri-Amp-Selekt DSM.jpg](/wiki/images/0/0a/Tri-Amp-Selekt_DSM.jpg)
Notes:
- The loudspeakers MUST be configured for Aktiv operation.
- Check the Konfig - Connection Help for the connection information e.g
- This will work with both Line Level and Power Amplifier Selekt cartridges.(Check the cartridge notes on mixing both types of cartridges in the same Selekt DSM)
- No HDMI Switching module is required for this setup.
- Do NOT mix Selekt power amplifier cartridges and Selekt Line-Level cartridges for Bi-Amp/Tri-Amp/Quad-Amp... system This is due to the Selekt power amplifier having a lower gain than other Linn amplifier. Therefore the feeds to loudspeaker inputs from the Selekt power amplifier and external power amplifier will be mis-matched in volume.