Linn DS/DSM Network requirements

ALL Linn DS/DSM products support 100Base-T connections and used on standard IPV4 network

Services, ports, protocols

The Services, ports and protocols are used by the Linn app and players in the network

Services

UPnP & SSDP (Linn DS/DSM discovery and control)

Port 1900 (UDP)

Port 2869 (TCP),

Ports 49152-65535 (both TCP & UDP)

LPEC (Linn Products Event Control)

Port 23 (TCP)

mDNS (Bonjour)

IPV4 224.0.0.251 port 5353 (UDP)

DHCP

Ports 67, 68 (UDP)

ODP (OpenHome Device Protocol)

TCP on an ephemeral port

Managed Switches

Make sure they are programmed to work in Layer-2 mode

Jumbo packet/frames networking

This is not an official standard and is not supported by the Linn DS/DSM.

Multicast or Unicast

If you are using more than six Linn DS/DSM products in the same network and want to share/Songcast the music to other rooms then make sure the LAN can support Multicasting.

If you have issues with your Routers check:

• QoS is turned OFF (some Routers do not implement this consistantly and this may block Linn DS discovery).
• If you have a simple network with Unmanaged switches, turn "IGMP Snooping" - OFF.
• On BTHomeHubs turn "Extended UPnP security" - OFF
• On DLINK, within "Advanced", Multicast Streams - ENABLE
• Speak to a 'networking specialist' who understands the necessary equipment and setup to ensure proper handling of multicast traffic and enable Multicast Songcasting

IGMP/IGMP Snooping

If your devices support this service then make sure this is DISABLED.(This should only be enabled and setup by a “suitable qualified network expert” ).