Template:Backpanel:Akurate DSM/3

From LinnDocs
Revision as of 07:49, 24 January 2020 by Yoda (talk | contribs)
Jump to: navigation, search
Akurate DSM 1 rear.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  3. ETHERNET - To connect to a network (100Base-T)
  4. EXAKT LINK - To connect to Exakt compatible devices (Exaktbox, Exakt Speakers, Urika II etc)
  5. ANALOGUE INPUTS (XLR, line level) - To connect sources with balanced (XLR) outputs.
  6. ANALOGUE INPUTS (RCA, phono/line level) - To connect a turntable or line level4 source with unbalanced (RCA) outputs.1 & 2 (Default MC phono)
  7. PHONO GROUND - To connect to a turntable grounding terminal.
  8. ANALOGUE OUTPUTS (XLR,variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.
  9. ANALOGUE OUTPUTS (RCA, variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
  10. DIGITAL INPUTS (Spdif) - To connect sources with Spdif (RCA) digital outputs.
  11. DIGITAL OUTPUT (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.
  12. DIGITAL INPUTS (Toslink) - To connect sources with Toslink (optical) digital outputs.
  13. DIGITAL OUTPUT (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
  14. HDMI INPUTS - To connect sources with 1.4 & 2.03 HDMI outputs.
  15. HDMI OUTPUT - To connect to a display device with 1.4 & 2.03 HDMI inputs.
  16. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.


1 Input 3 is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line-level input.
2 Analogue inputs (including front panel AUX IN), can be pass through an Analogue volume control to the Analogue out when Delay mode set to DIRECT on these inputs.
3 Supports HDCP 2.2 up to and including 60Hz UHD. We recommend using HDMI Certified cables
4 This input can be adjusted for different Phono stages or Line level by reconfiguring a circuit board within the Linn DS.



Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=Template:Backpanel:Akurate_DSM/3&oldid=21997"