ExaktBox Sub

Product info

• Product Name:

ExaktBox Sub

• Date of Introduction:

September 2015

• Type: Exakt Digital Crossover with DAC designed for use with subwoofers

Configurable for one or two subwoofers

Software upgradable to support more and more subwoofers

Connects to internal subwoofer power amplifiers

• Can only be used wit Exakt-Link output products

• Features
  • Dynamik Power Supply
  • Exakt Technology

Support

Linn Support Site

Latest software

Latest software releases

Open source software

Manuals

Konfig manual

Space Optimisation+

Space Optimisation (Advanced)

Safety Information

Warranty Terms and Conditions

Back Panel Connections

1. MAINS INPUT - To connect to the mains electricity supply.
2. EXAKT LINK- To connect to Exakt compatible devices (CAT-5 cables)
3. ANALOGUE OUTPUTS (XLR,variable level) - To connect to power amplifiers with balanced (XLR) analogue inputs. (300ohm Output impedance)
4. ANALOGUE OUTPUTS (RCA, variable level) - To connect to power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance)
5. FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).

Note: Both XLR and RCA outputs are active simulatneously.

EXAKT LINK Connections

Example if you are using a Klimaxe DSM/1, Akudoriks and Exaktbox sub:

The Exakt-link cable can supply digital audio for multiple speakers.
Use Konfig > Exakt Setup pages to declare if Channel1 is left or right hand channel, Channel2 is left or right hand channel and the type/quantity of subwoofers to the Exaktbox sub

Check HERE for more information of Exakt link connection

EXAKT LED Status

LED	OFF	ON	Flash / Blink
0 Master Port	No Link	Link Discovered	Link Activity
1 Audio Clock	No Clock	Clock locked	Clock not locked
2 Slave Port	No Link	Link Enabled	Link Activity
3 Software Status	Not Configured	Running	Hardware Fault

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

• Unpacking Information

• Positioning Information

• The ExaktBox is shipped from Linn with no speaker setup and must be configured with Konfig software.

Exakt options

Exakt usage can be found in Klimax_Exakt_System

One of the beneifts of the Exakt system is that you can easily setup and optimise your listening environment. Simply download the latest version of Konfig (version 4.11.7 or higher) and follow the Space_Optimsation+ & Space Optimisation+ (Advanced)

Supported speakers

Currently available using one Akurate Exaktbox
Note: these speakers must be made externally Aktiv

• pair Klimax / Artikulat 350(Externally Aktiv 350's will need to be converted for use with the Exaktbox operation)
• pair Akubarik passive made Aktiv
• pair Akudorik passive speakers made Aktiv
• pair Akurate 242 Mk1 & Mk2
• pair Akurate 212 Mk1 & Mk2
• pair Katan
• pair Komri
• pair Keltik
• pair Espek
• pair Majik Isobarik
• pair Majik 140
• pair of Ninka speakers- bi-amped or Tri-amped
• pair of Keilidh- Bi-Amped & Tri-Amped (t1-Tweeter 15, T2-Tweeter 038)
• pair of AV5140
• pair of Kaber
• pair of Majik 109

non-Linn speakers

Currently available

1. B&W Nautilus
2. B&W 802 Diamond
3. KUDOS Super10
4. KUDOS Super20
5. KUSOS Titan 808

Example of use

Trouble shooting

Check Exakt trouble shooting

For further assistance, try our customer support pages or the Linn Forum.