Difference between revisions of "Akurate DS (2010 Variant)"

From LinnDocs
Jump to: navigation, search
m (Product info)
m (Latest software)
Line 20: Line 20:
  
 
== '''Latest software''' ==
 
== '''Latest software''' ==
 
+
{{General:Latest_Product_SW}}
[http://www.linn.co.uk/ds_software Latest software releases]
 
 
 
[http://oss.linn.co.uk/trac Open source software]
 
  
 
== '''Manuals''' ==
 
== '''Manuals''' ==

Revision as of 11:43, 14 August 2019

AkurateDSMk2FrontTop.jpg

Product info

  • Product Name: Akurate DS/1 (Variant 2010)
Other variants of this product can be found at Akurate DS varinats
  • Date of Introduction: November 2010 - April 2015
Replaced by Akurate DS/2 in 2015
  • Type: Digital music player

Support

Linn Support Site

Latest software

Latest software releases

Details of latest Product release software

Manuals

Quickstart Guide

Controlling the product User Guide

Product setup:Manage Systems user manual

Space Optimisation (Advanced)

Safety Information

Warranty Terms and Conditions

Third Party Software Copyright

Network Setup

DS Budget System Setup

DS Entry Level System Setup

DS High End System Setup

Back Panel Connections

AkurateDSMk2Back.png


  1. MAINS INPUT - To connect to the mains electricity supply.
  2. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
  3. ETHERNET - To connect to a network.
  4. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  5. RS232 PORTS - To connect to Linn devices that don't have ethernet.
  6. DIGITAL OUTPUT - To connect to an external DAC or computer that has an Spdif input.
  7. BALANCED AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.
  8. UNBALANCED AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.

Front Panel Connections

AkurateDSMk2Front.png
  1. SOURCE SELECT BUTTON - Changes to the next source
  2. SKIP TRACK BUTTONS - Skips to the previous/next track
  3. STOP BUTTON - Stops playing the current track
  4. PLAY BUTTON - Starts playing the current track
  5. STANDBY BUTTON - Brings the product in/out of standby
  6. POWER SWITCH - Switches the power on/off
  7. FRONT PANEL DISPLAY

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.


Front display information

Akurate FP display.png

Key points

  • "No Network/LAN" indicates that the Linn DS/DSM/HUB does not have a live computer network connection. This can simply be that the cable is loose or that your computer network/LAN is off/not connected.
  • ! indicates that the Linn DS/DSM/HUB is expecting to see all of the pre-configured Exakt devices, (Exakt speakers, Exakrbox.., Urika-II) connected but it cannot see them. This is typically because the Exakt devices are physically disconnected from the Exakt-link network, they physically have no power going to them or the Linn DS/DSM/HUB has prevously been configured for these products but have not been removed from its setup.

FAQ's

Check:


For further assistance, try our customer support pages