Difference between revisions of "Akurate DS (2010 Variant)"
m (→Installation) |
m (→Product info) |
||
| Line 4: | Line 4: | ||
* ''Product Name:'' Akurate DS/1 (Variant 2010) | * ''Product Name:'' Akurate DS/1 (Variant 2010) | ||
| + | ::Other variants of this product can be found at<u> [[Akurate_DS_Variants|Akurate DS varinats]]</u><br> | ||
* ''Date of Introduction:'' November 2010 - April 2015 | * ''Date of Introduction:'' November 2010 - April 2015 | ||
| − | : Replaced by [[Akurate DS (Exakt Variant) | Akurate DS/2]] in 2015 | + | ::Replaced by [[Akurate DS (Exakt Variant) | Akurate DS/2]] in 2015 |
* ''Type:'' Digital music player | * ''Type:'' Digital music player | ||
Revision as of 10:07, 14 August 2019
Contents
Product info
- Product Name: Akurate DS/1 (Variant 2010)
- Other variants of this product can be found at Akurate DS varinats
- Other variants of this product can be found at Akurate DS varinats
- Date of Introduction: November 2010 - April 2015
- Replaced by Akurate DS/2 in 2015
- Type: Digital music player
- Features
Support
Latest software
Manuals
Controlling the product User Guide
Product setup:Manage Systems user manual
Third Party Software Copyright
Network Setup
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
- ETHERNET - To connect to a network.
- FALLBACK - To put the device into Fallback mode (used when reprogramming)
- RS232 PORTS - To connect to Linn devices that don't have ethernet.
- DIGITAL OUTPUT - To connect to an external DAC or computer that has an Spdif input.
- BALANCED AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.
- UNBALANCED AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
Front Panel Connections
- SOURCE SELECT BUTTON - Changes to the next source
- SKIP TRACK BUTTONS - Skips to the previous/next track
- STOP BUTTON - Stops playing the current track
- PLAY BUTTON - Starts playing the current track
- STANDBY BUTTON - Brings the product in/out of standby
- POWER SWITCH - Switches the power on/off
- FRONT PANEL DISPLAY
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
Front display information
Key points
- "No Network/LAN" indicates that the Linn DS/DSM/HUB does not have a live computer network connection. This can simply be that the cable is loose or that your computer network/LAN is off/not connected.
!
indicates that the Linn DS/DSM/HUB is expecting to see all of the pre-configured Exakt devices, (Exakt speakers, Exakrbox.., Urika-II) connected but it cannot see them. This is typically because the Exakt devices are physically disconnected from the Exakt-link network, they physically have no power going to them or the Linn DS/DSM/HUB has prevously been configured for these products but have not been removed from its setup.
FAQ's
Check:
For further assistance, try our customer support pages
