Difference between revisions of "Akurate DSM"
m (→Latest software) |
m (→Back Panel Connections) |
||
| Line 55: | Line 55: | ||
# '''ETHERNET''' - To connect to a network. | # '''ETHERNET''' - To connect to a network. | ||
# '''ANALOGUE INPUTS''' (XLR, line level) - To connect sources with balanced (XLR) outputs.<sup>2</sup> | # '''ANALOGUE INPUTS''' (XLR, line level) - To connect sources with balanced (XLR) outputs.<sup>2</sup> | ||
| − | # '''ANALOGUE INPUTS''' (RCA, phono/line level) - To connect a turntable or line level source with unbalanced (RCA) outputs<sup>1</sup><sup>2</sup>. (Default MC phono) | + | # '''ANALOGUE INPUTS''' (RCA, phono/line level) - To connect a turntable or line level source <sup>3</sup> with unbalanced (RCA) outputs<sup>1</sup>+<sup>2</sup>. (Default MC phono) |
# '''PHONO GROUND''' - To connect to a turntable grounding terminal. | # '''PHONO GROUND''' - To connect to a turntable grounding terminal. | ||
# '''ANALOGUE OUTPUTS''' (XLR,variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<sup>2</sup> | # '''ANALOGUE OUTPUTS''' (XLR,variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<sup>2</sup> | ||
| Line 70: | Line 70: | ||
'''<sup>1</sup>''' Input 3 is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line-level input.<br> | '''<sup>1</sup>''' Input 3 is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line-level input.<br> | ||
'''<sup>2</sup>''' Analogue inputs (including front panel AUX IN), can be pass through an Analogue volume control to the Analogue out when Delay mode set to DIRECT on these inputs. | '''<sup>2</sup>''' Analogue inputs (including front panel AUX IN), can be pass through an Analogue volume control to the Analogue out when Delay mode set to DIRECT on these inputs. | ||
| + | '''<sup>3</sup>''' This input can be adjusted for different Phono stages or Line level by reconfiguring a circuit board within the Linn DS. | ||
<br> | <br> | ||
Revision as of 07:44, 24 January 2020
Contents
Getting Started
Product info
- Product Name: Akurate DSM (Variant 2011)
- Other variants of this product can be found at Akurate DSM varinats
- Other variants of this product can be found at Akurate DSM varinats
- Date of Introduction: November 2011 - May 2014
- Replaced by the Akurate DSM/1 in June 2014
- Type: Integrated digital music player and preamplifier
Support
Latest software
Details of latest Product release software
Manuals
Controlling the product User Guide
Product setup:Manage Systems user manual
Third Party Software Copyright
HDMI Setup
Network Setup
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- FALLBACK - To put the device into Fallback mode (used when reprogramming)
- ETHERNET - To connect to a network.
- ANALOGUE INPUTS (XLR, line level) - To connect sources with balanced (XLR) outputs.2
- ANALOGUE INPUTS (RCA, phono/line level) - To connect a turntable or line level source 3 with unbalanced (RCA) outputs1+2. (Default MC phono)
- PHONO GROUND - To connect to a turntable grounding terminal.
- ANALOGUE OUTPUTS (XLR,variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.2
- ANALOGUE OUTPUTS (RCA, variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
- DIGITAL INPUTS (Spdif) - To connect sources with Spdif (RCA) digital outputs.
- DIGITAL OUTPUT (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.
- DIGITAL INPUTS (Toslink) - To connect sources with Toslink (optical) digital outputs.
- DIGITAL OUTPUT (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
- HDMI INPUTS- To connect sources with HDMI outputs.
- HDMI OUTPUT - To connect to a display device with HDMI inputs.
- EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
1 Input 3 is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line-level input.
2 Analogue inputs (including front panel AUX IN), can be pass through an Analogue volume control to the Analogue out when Delay mode set to DIRECT on these inputs.
3 This input can be adjusted for different Phono stages or Line level by reconfiguring a circuit board within the Linn DS.
Front Panel Connections
- MUTE BUTTON - Mutes/unmutes the audio
- VOLUME ADJUST BUTTONS - Changes the volume up/down
- SOURCE SELECT BUTTONS - Changes to the previous/next source
- SLEEP BUTTON - Brings the unit in/out of sleep mode
- FRONT PANEL DISPLAY
- HEADPHONE OUTPUT - To connect to stereo headphones with a 3.5mm input
- AUX SOURCE INPUT - To connect to a stereo audio source with a 3.5mm output 2
- POWER SWITCH- Switches the power on/off
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
Front display information
Key points
- "No Network/LAN" indicates that the Linn DS/DSM/HUB does not have a live computer network connection. This can simply be that the cable is loose or that your computer network/LAN is off/not connected.
!
indicates that the Linn DS/DSM/HUB is expecting to see all of the pre-configured Exakt devices, (Exakt speakers, Exakrbox.., Urika-II) connected but it cannot see them. This is typically because the Exakt devices are physically disconnected from the Exakt-link network, they physically have no power going to them or the Linn DS/DSM/HUB has prevously been configured for these products but have not been removed from its setup.
FAQ's
Check:
For further assistance, try our customer support pages
