Difference between revisions of "DS High End System"

From LinnDocs
Jump to: navigation, search
(→‎Step 1: Connect Router To Network switch)
m
 
(60 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
;<big>NOTE: This page is retired as this was created in the days when we still had modems, low speed internet and poor Wifi. Due to many updates in the Linn DS, Ethernet/Internet world and components this information is obsolete, but kept for reference.<br>
 +
Plug the Linn DS/DSM/HUB into your LAN and it will work.</big>
 +
;(If you don't know what a modem is, then this proves how old this page is! [[File:Emoji-wink.png|30px]] )
 
==Introduction==
 
==Introduction==
  
Line 5: Line 8:
  
  
−
DIAGRAM (FULL SYSTEM)
+
[[image:High6.png|centre]]
 +
 
 +
 
 +
 
 +
It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.
  
  
−
It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.
 
  
 
==Required Components==
 
==Required Components==
Line 14: Line 20:
 
The following components are required for the system detailed in this page:
 
The following components are required for the system detailed in this page:
  
 +
*Internet Service Provider (ISP) router
 
*Router
 
*Router
−
*Home computer
+
*Computer
 
*Linn DS
 
*Linn DS
 
*NAS
 
*NAS
 
*Network switch
 
*Network switch
−
*Wireless access point  
+
*Wireless access point (WAP)
−
*Wireless control device
+
*Wireless control point
−
 
 
  
 
Notes:  
 
Notes:  
 
# Ethernet cables are required to connect devices
 
# Ethernet cables are required to connect devices
−
# Router is required to feature address reservation
+
# Router is required to have a WAN port
−
# NAS is required to have media server software and backup support
+
# NAS is required to have UPnP media server software preinstalled
−
# If a wireless router is being used, 'N' band WAP support is recommended
+
# WAP should have 'N' band support
  
−
==Step 1: Connect Router To Network switch==
+
==Step 1: Connect Router To ISP Router==
 +
 
 +
#Connect the ISP router to the WAN port on the router
 +
#Power on the ISP router
 +
#Power on the router
 +
 
 +
 
 +
 
 +
[[image:High1.1.png|centre]]
 +
 
 +
 
 +
 
 +
==Step 2: Connect Router To Network switch==
 +
 
 +
#Connect the router to the network switch
 +
#Power on the network switch
  
−
#Connect the router to the network switch.
 
  
  
 
[[image:High1.png|centre]]
 
[[image:High1.png|centre]]
  
−
==Step 2: Connect computer to switch==
 
  
−
Connect the home computer to the switch using a standard ethernet cable. The computer’s network adapter should be configured to ‘obtain an IP address automatically’. Configure the router to the [[DS Network Setup:Configuring the Router|'''recommended settings''']].
+
 
 +
==Step 3: Connect Computer To Network Switch==
 +
 
 +
#Connect the computer to the network switch.  
 +
#Power on the computer
 +
#Configure the router to issue IP addresses in a suitable range
 +
 
  
  
Line 44: Line 69:
  
  
−
==Step 3: Connect NAS to switch==
 
  
−
Connect the NAS to the switch using a standard ethernet cable. Ensure the DHCP server is disabled on the NAS and configure the NAS to 'obtain an IP address automatically'.
+
The network adapter on the computer should already be configured to ‘'''obtain an IP address automatically'''’.
 +
 
 +
==Test Step==
 +
*Test that the computer has internet access
 +
#Download Konfig [http://www.linn.co.uk/konfig  here]
 +
#Install Konfig onto the computer
 +
 
 +
 
 +
 
 +
==Step 4: Connect Linn DS To Network Switch==
 +
 
 +
#Connect the Linn DS to the network switch
 +
#Power on the Linn DS
 +
 
 +
 
 +
 
 +
[[Image:High4.1.2.png|centre]]
 +
 
 +
 
 +
 
 +
==Test Step==
 +
*Test that the Linn DS appears on the network
 +
#Open Konfig
 +
#Check that the Linn DS is discovered in Konfig
 +
 
 +
 
 +
 
 +
==Step 5: Connect NAS to Network Switch==
 +
 
 +
#Connect the NAS to the network switch
 +
#Power on the NAS
 +
 
  
  
Line 52: Line 107:
  
  
−
==Step 4: Connect DS to switch==
 
  
−
Connect the DS player to the switch then switch it on. The DS should automatically obtain its reserved IP address from the router.
+
The network adapter on the NAS should already be configured to ''''obtain an IP address automatically''''.
  
  
−
[[Image:High4.png|centre]]
 
  
 +
==Step 6: Install Linn DS Control Software On Computer==
  
−
==Step 5: Install DS control software on computer==
+
#Download and install Kazoo from [http://www.linn.co.uk/Kazoo  here]
 +
#View the Kazoo manual [[Kazoo_Manual|here]]
  
−
Once the system has been set up as shown above, the DS control software (e.g. Kinsky Desktop) must be installed on the computer. The latest Linn DS software downloads can be found [http://www.linn.co.uk/ds_software '''here'''].
+
==Test Step==
−
It should now be possible to play music throught the DS.
+
*Test that the Linn DS plays music
 +
#Open Kazoo
 +
#Select the Linn DS
 +
#Select Radio from the list of available sources
 +
#Highlight and play any radio station; the timer will start to count when the radio station is playing<br><br>
  
 +
'''Note: To hear music, the Linn DS must be connected to a hi-fi system'''
  
  
−
==Step 6: Add wireless access point==
 
  
−
A wireless access point (WAP) can now be added in to the system. A wireless control device (such as a PDA, iPhone, etc.) can be used to verify that this is working.
+
==Step 7: Connect Wireless Access Point==
 +
 
 +
#Connect the WAP to the router
 +
 
 +
==Test Step==
 +
*Install Kazoo on the wireless control point and check that you can control the Linn DS
  
  
 
[[Image:High5.png|centre]]
 
[[Image:High5.png|centre]]
 +
 +
 +
 +
==Links to Other Systems==
 +
 +
[[DS_Budget_System | DS Budget System]]
 +
 +
[[DS_Entry_Level_System | DS Entry Level System]]
 +
 +
[[Networking_Glossary | Networking Glossary]]
 +
 +
[[Network_Components | Network Components]]
 +
 +
<!--[Multicast_Filtering#Tested_Devices | Multicast Filtering Tested Devices]]-->
 +
 +
[[Linn_DS/DSM_Network_requirements|Linn DS/DSM Network requirements]]

Latest revision as of 15:59, 20 November 2020

NOTE: This page is retired as this was created in the days when we still had modems, low speed internet and poor Wifi. Due to many updates in the Linn DS, Ethernet/Internet world and components this information is obsolete, but kept for reference.

Plug the Linn DS/DSM/HUB into your LAN and it will work.

(If you don't know what a modem is, then this proves how old this page is! Emoji-wink.png )

Introduction

This is a recommended guide to setting up a high end Linn DS system, requiring all of the specified network components to be purchased, ensuring that they meet the stated specifications.


High6.png


It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.


Required Components

The following components are required for the system detailed in this page:

  • Internet Service Provider (ISP) router
  • Router
  • Computer
  • Linn DS
  • NAS
  • Network switch
  • Wireless access point (WAP)
  • Wireless control point

Notes:

  1. Ethernet cables are required to connect devices
  2. Router is required to have a WAN port
  3. NAS is required to have UPnP media server software preinstalled
  4. WAP should have 'N' band support

Step 1: Connect Router To ISP Router

  1. Connect the ISP router to the WAN port on the router
  2. Power on the ISP router
  3. Power on the router


High1.1.png


Step 2: Connect Router To Network switch

  1. Connect the router to the network switch
  2. Power on the network switch


High1.png


Step 3: Connect Computer To Network Switch

  1. Connect the computer to the network switch.
  2. Power on the computer
  3. Configure the router to issue IP addresses in a suitable range


High2.png


The network adapter on the computer should already be configured to ‘obtain an IP address automatically’.

Test Step

  • Test that the computer has internet access
  1. Download Konfig here
  2. Install Konfig onto the computer


Step 4: Connect Linn DS To Network Switch

  1. Connect the Linn DS to the network switch
  2. Power on the Linn DS


High4.1.2.png


Test Step

  • Test that the Linn DS appears on the network
  1. Open Konfig
  2. Check that the Linn DS is discovered in Konfig


Step 5: Connect NAS to Network Switch

  1. Connect the NAS to the network switch
  2. Power on the NAS


High3.png


The network adapter on the NAS should already be configured to 'obtain an IP address automatically'.


Step 6: Install Linn DS Control Software On Computer

  1. Download and install Kazoo from here
  2. View the Kazoo manual here

Test Step

  • Test that the Linn DS plays music
  1. Open Kazoo
  2. Select the Linn DS
  3. Select Radio from the list of available sources
  4. Highlight and play any radio station; the timer will start to count when the radio station is playing

Note: To hear music, the Linn DS must be connected to a hi-fi system


Step 7: Connect Wireless Access Point

  1. Connect the WAP to the router

Test Step

  • Install Kazoo on the wireless control point and check that you can control the Linn DS


High5.png


Links to Other Systems

DS Budget System

DS Entry Level System

Networking Glossary

Network Components


Linn DS/DSM Network requirements

Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=DS_High_End_System&oldid=23065"