Difference between revisions of "DS Entry Level System"

From LinnDocs
Jump to: navigation, search
(Step 3: Connect DS To Router)
m
 
(69 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
;<big>NOTE: This page is retired as this was created in the days when we still had modems, low speed internet and poor Wifi. Due to many updates in the Linn DS, Ethernet/Internet world and components this information is obsolete, but kept for reference.<br>
 +
Plug the Linn DS/DSM/HUB into your LAN and it will work.</big>
 +
;(If you don't know what a modem is, then this proves how old this page is! [[File:Emoji-wink.png|30px]] )
 +
 
==Introduction==
 
==Introduction==
  
Line 5: Line 9:
  
  
DIAGRAM (FULL SYSTEM)
+
[[image:Entry5.1.2.png|centre]]
 +
 
  
  
Line 14: Line 19:
 
The following components are required for the system detailed in this page:
 
The following components are required for the system detailed in this page:
  
 +
*Internet Service Provider (ISP) router
 
*Router
 
*Router
*Home coputer
+
*Computer
 
*Linn DS
 
*Linn DS
 
*NAS
 
*NAS
 
  
 
Notes:  
 
Notes:  
 
# Ethernet cables are required to connect devices
 
# Ethernet cables are required to connect devices
# Router is required to have built in switch and feature address reservation
+
# Router is required to have a WAN port and built in network switch
# NAS is required to have media server software (Twonky or Asset UPnP) and backup support
+
# NAS is required to have UPnP media server software preinstalled
# If a wireless router is being used, n band WAP support is recommended
+
# If a wireless router is being used, ''''N'''' band WAP support is recommended
  
==Step 1: Connect Computer To Router==
+
==Step 1: Connect ISP Router to Router==
 +
 
 +
#Connect the ISP router to the WAN port on the router
 +
#Power on the ISP router
 +
#Power on the router
 +
 
 +
 
 +
 
 +
[[image:Entry1.1.png|centre]]
 +
 
 +
 
 +
 
 +
==Step 2: Connect Computer to Router==
 +
 
 +
#Connect the computer to the router
 +
#Power on the computer
 +
#Configure the router to issue IP addresses in a suitable range
  
#Connect the computer to the router.
 
#Configure the router to the [[DS Network Setup:Configuring the Router|'''recommended settings''']].
 
  
  
 
[[image:Entry1.png|centre]]
 
[[image:Entry1.png|centre]]
  
The computer’s network adapter should already be configured to ‘'''Obtain an IP address automatically'''’.
 
  
==Step 2: Connect NAS To Router==
 
  
#Connect the NAS to the router.  
+
The network adapter on the computer should already be configured to ‘'''obtain an IP address automatically'''’.
#Ensure the DHCP server is disabled on the NAS and configure the NAS to '''Obtain an IP address automatically'''.
+
 
 +
==Test Step==
 +
*Test that the computer has internet access
 +
#Download Konfig [http://www.linn.co.uk/konfig  here]
 +
#Install Konfig onto the computer
 +
 
 +
 
 +
 
 +
==Step 3: Connect Linn DS to Router==
 +
 
 +
#Connect the Linn DS to the router  
 +
#Power on the Linn DS.
 +
 
 +
 
 +
 
 +
[[Image:Entry3.1.2.png|center]]
 +
 
 +
 
 +
 
 +
==Test Step==
 +
*Test that the Linn DS appears on the network
 +
#Open Konfig
 +
#Check that the Linn DS is discovered in Konfig
 +
 
 +
 
 +
 
 +
==Step 4: Connect NAS to Router==
 +
 
 +
#Connect the NAS to the router
 +
#Power on the NAS
 +
 
 +
 
 +
 
 +
[[image:Entry4.1.2.png|centre]]
 +
 
 +
 
 +
 
 +
The network adapter on the NAS should already be configured to ''''obtain an IP address automatically''''.
 +
 
 +
==Step 5: Install Linn DS Control Software On Computer==
  
[[image:Entry2.png|centre]]
+
#Download and install Kazoo from [https://www.linn.co.uk/Kazoo  here]
 +
#View the Kazoo manual [[Kazoo_Manual|here]]
  
==Step 3: Connect Linn DS To Router==
+
==Test Step==
 +
*Test that the Linn DS plays music
 +
#Open Kazoo
 +
#Select the Linn DS
 +
#Select Radio from the list of available sources
 +
#Highlight and play any radio station; the timer will start to count when the radio station is playing<br><br>
  
Connect the Linn DS player to the router then power it on. The Linn DS should automatically obtain its reserved IP address from the router.
+
'''Note: To hear music, the Linn DS must be connected to a hi-fi system'''
  
 +
==Links to Other Systems==
  
[[Image:Entry3.png|center]]
 
  
==Step 4: Install DS Control Software On Computer==
+
[[DS_Budget_System | DS Budget System]]
  
Linn DS control software (e.g. Kinsky Desktop) must now be installed on the computer. The latest Linn DS software downloads and manuals can be found [http://www.linn.co.uk/ds_software '''here'''].
+
[[DS_High_End_System | DS High End System]]
It should now be possible to play music throught the Linn DS.
 
  
==Step 5: Adding Wireless Control==
+
[[Networking_Glossary | Networking Glossary]]
  
If desired, a wireless access point (WAP) can be added to the network to allow wireless control of the Linn DS through a portable, wireless enabled control point (such as a laptop, mobile phone, etc.).
+
[[Network_Components | Network Components]]
  
 +
<!--[[Multicast_Filtering#Tested_Devices | Multicast Filtering Tested Devices]]-->
  
[[Image:Entry4.png|center]]
+
[[Linn_DS/DSM_Network_requirements|Linn DS/DSM Network requirements]]

Latest revision as of 15:58, 20 November 2020

NOTE: This page is retired as this was created in the days when we still had modems, low speed internet and poor Wifi. Due to many updates in the Linn DS, Ethernet/Internet world and components this information is obsolete, but kept for reference.

Plug the Linn DS/DSM/HUB into your LAN and it will work.

(If you don't know what a modem is, then this proves how old this page is! Emoji-wink.png )

Introduction

This is a recommended guide to setting up an entry level Linn DS system, requiring you to purchase some network components in order to build the recommended system.


Entry5.1.2.png


It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.

Required Components

The following components are required for the system detailed in this page:

  • Internet Service Provider (ISP) router
  • Router
  • Computer
  • Linn DS
  • NAS

Notes:

  1. Ethernet cables are required to connect devices
  2. Router is required to have a WAN port and built in network switch
  3. NAS is required to have UPnP media server software preinstalled
  4. If a wireless router is being used, 'N' band WAP support is recommended

Step 1: Connect ISP Router to Router

  1. Connect the ISP router to the WAN port on the router
  2. Power on the ISP router
  3. Power on the router


Entry1.1.png


Step 2: Connect Computer to Router

  1. Connect the computer to the router
  2. Power on the computer
  3. Configure the router to issue IP addresses in a suitable range


Entry1.png


The network adapter on the computer should already be configured to ‘obtain an IP address automatically’.

Test Step

  • Test that the computer has internet access
  1. Download Konfig here
  2. Install Konfig onto the computer


Step 3: Connect Linn DS to Router

  1. Connect the Linn DS to the router
  2. Power on the Linn DS.


Entry3.1.2.png


Test Step

  • Test that the Linn DS appears on the network
  1. Open Konfig
  2. Check that the Linn DS is discovered in Konfig


Step 4: Connect NAS to Router

  1. Connect the NAS to the router
  2. Power on the NAS


Entry4.1.2.png


The network adapter on the NAS should already be configured to 'obtain an IP address automatically'.

Step 5: Install Linn DS Control Software On Computer

  1. Download and install Kazoo from here
  2. View the Kazoo manual here

Test Step

  • Test that the Linn DS plays music
  1. Open Kazoo
  2. Select the Linn DS
  3. Select Radio from the list of available sources
  4. Highlight and play any radio station; the timer will start to count when the radio station is playing

Note: To hear music, the Linn DS must be connected to a hi-fi system

Links to Other Systems

DS Budget System

DS High End System

Networking Glossary

Network Components


Linn DS/DSM Network requirements