Difference between revisions of "DS Budget System"

From LinnDocs
Jump to: navigation, search
(Required components)
m
 
(111 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
;<big>NOTE: This page is retired as this was created in the days when we still had modems, low speed internet and poor Wifi. Due to many updates in the Linn DS, Ethernet/Internet world and components this information is obsolete, but kept for reference.<br>
 +
Plug the Linn DS/DSM/HUB into your LAN and it will work.</big>
 +
;(If you don't know what a modem is, then this proves how old this page is! [[File:Emoji-wink.png|30px]] )
 +
 
==Introduction==
 
==Introduction==
  
This is a recommended guide to setting up the most basic DS system, using any networking components that are already available. It requires the minimum expenditure in order to get a DS product up and running in an existing network environment.
+
This is a recommended guide to setting up the most basic Linn DS system, using any networking components that are already available. It requires the minimum expenditure in order to get a Linn DS product up and running in an existing network environment.
  
  
  
DIAGRAM (FULL SYSTEM)
+
[[image:DSBudget4.png|centre|none]]
 +
  
  
 
It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.
 
It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.
  
==Required components==
+
==Required Components==
  
*Router
+
*Internet Service Provider (ISP) router
*Home computer
+
*Computer
 
*Linn DS  
 
*Linn DS  
 
  
 
Notes:  
 
Notes:  
 
# Ethernet cables are required to connect devices
 
# Ethernet cables are required to connect devices
# Router may have been provided by your internet service provider
+
# ISP router will have been provided by your internet service provider
# An additional network switch may be required in Step 2 below
+
# An additional network switch may be required (see Step 2)
 +
# Computer is required to have UPnP media server software preinstalled
  
==Step 1: Connect computer to router==
+
==Step 1: Connect Computer To ISP Router==
  
 
If the computer already has a working internet connection then continue to step 2.
 
If the computer already has a working internet connection then continue to step 2.
  
Connect the home computer to the router. The computer’s network adapter should already be configured to ‘'''Obtain an IP address automatically'''’. First power on the router, then the computer.
+
#Connect the computer to the ISP router
 +
#Power on the ISP router
 +
#Power on the computer
 +
 
 +
 
 +
 
 +
[[image:DSBudget1.png|centre|none]]
 +
 
 +
 
 +
 
 +
The network adapter on the computer should already be configured to ‘'''obtain an IP address automatically'''’.
 +
 
 +
 
 +
==Test Step==
 +
*Test that the computer has internet access
 +
#Download Konfig [http://www.linn.co.uk/konfig  here]
 +
#Install Konfig onto the computer
 +
 
 +
 
 +
==Step 2: Connect Linn DS To ISP Router==
 +
 
 +
#Connect the Linn DS to the ISP router
 +
#Power on the Linn DS
 +
 
 +
 
 +
 
 +
[[image:DSBudget2.png|centre|none]]
 +
 
 +
 
 +
 
 +
If the ISP router does not have enough ethernet ports to connect the Linn DS then a network switch will be required and the devices should be connected as follows.
 +
 
 +
#Connect the ISP router to the network switch
 +
#Connect the computer to the network switch
 +
#Connect the Linn DS to the network switch
 +
#Power on the network switch
 +
#Power on the Linn DS
 +
 
 +
 
 +
 
 +
[[image:DSBudget3.png|centre|none]]
 +
 
 +
 
 +
 
 +
==Test Step==
 +
*Check that the Linn DS appears on the network
 +
#Open Konfig
 +
#The Konfig manual can be found [[Konfig_Manual|here]]
 +
#Check that the Linn DS is discovered in Konfig
 +
 
 +
==Step 3: Install Linn DS Control Software On Computer==
  
 +
#Download and install Kazoo from [http://www.linn.co.uk/Kazoo  here]
 +
#View the Kazoo manual [[Kazoo_Manual|here]]
  
[[image:Budget1.png|centre|none]]
+
==Test Step==
 +
*Test that the Linn DS plays music
 +
#Open Kazoo
 +
#Select the Linn DS
 +
#Select Radio from the list of available sources
 +
#Highlight and play any radio station; the timer will start to count when the radio station is playing<br><br>
  
==Step 2: Add DS product to network==
+
'''Note: To hear music, the Linn DS must be connected to a hi-fi system'''
  
#Connect the DS product to the router
+
==Step 4: Add in other network devices==
#Power on the DS
+
<br>
 +
You can now add in your other network devices.
 +
You may want to add a storage device with a built in medai server to your network.
 +
Note: This network is not restricted to Linn only devices.
 +
<br><br>
  
[[image:Budget2.png|centre|none]]
+
==Links to Other Systems==
  
 +
[[DS_Entry_Level_System | DS Entry Level System]]
  
If the router does not have enough ethernet ports to connect the DS then a network switch will be required. Connect the router to the switch, then connect the computer and the DS to the switch. First power on the router and switch, then the computer and finally the DS.
+
[[DS_High_End_System | DS High End System]]
  
 +
[[Networking_Glossary | Networking Glossary]]
  
[[image:Budget3.png|centre|none]]
+
[[Network_Components | Network Components]]
  
==Step 3: Install DS control software on computer==
+
<!--[[Multicast_Filtering#Tested_Devices | Multicast Filtering Tested Devices]]-->
  
DS control software (e.g. Kinsky Desktop) must now be installed on the computer. The latest Linn DS software downloads and manuals can be found [http://www.linn.co.uk/ds_software '''here'''].
+
[[Linn_DS/DSM_Network_requirements|Linn DS/DSM Network requirements]]
It should now be possible to play music through the DS.
 

Latest revision as of 15:58, 20 November 2020

NOTE: This page is retired as this was created in the days when we still had modems, low speed internet and poor Wifi. Due to many updates in the Linn DS, Ethernet/Internet world and components this information is obsolete, but kept for reference.

Plug the Linn DS/DSM/HUB into your LAN and it will work.

(If you don't know what a modem is, then this proves how old this page is! Emoji-wink.png )

Introduction

This is a recommended guide to setting up the most basic Linn DS system, using any networking components that are already available. It requires the minimum expenditure in order to get a Linn DS product up and running in an existing network environment.


DSBudget4.png


It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.

Required Components

  • Internet Service Provider (ISP) router
  • Computer
  • Linn DS

Notes:

  1. Ethernet cables are required to connect devices
  2. ISP router will have been provided by your internet service provider
  3. An additional network switch may be required (see Step 2)
  4. Computer is required to have UPnP media server software preinstalled

Step 1: Connect Computer To ISP Router

If the computer already has a working internet connection then continue to step 2.

  1. Connect the computer to the ISP router
  2. Power on the ISP router
  3. Power on the computer


DSBudget1.png


The network adapter on the computer should already be configured to ‘obtain an IP address automatically’.


Test Step

  • Test that the computer has internet access
  1. Download Konfig here
  2. Install Konfig onto the computer


Step 2: Connect Linn DS To ISP Router

  1. Connect the Linn DS to the ISP router
  2. Power on the Linn DS


DSBudget2.png


If the ISP router does not have enough ethernet ports to connect the Linn DS then a network switch will be required and the devices should be connected as follows.

  1. Connect the ISP router to the network switch
  2. Connect the computer to the network switch
  3. Connect the Linn DS to the network switch
  4. Power on the network switch
  5. Power on the Linn DS


DSBudget3.png


Test Step

  • Check that the Linn DS appears on the network
  1. Open Konfig
  2. The Konfig manual can be found here
  3. Check that the Linn DS is discovered in Konfig

Step 3: Install Linn DS Control Software On Computer

  1. Download and install Kazoo from here
  2. View the Kazoo manual here

Test Step

  • Test that the Linn DS plays music
  1. Open Kazoo
  2. Select the Linn DS
  3. Select Radio from the list of available sources
  4. Highlight and play any radio station; the timer will start to count when the radio station is playing

Note: To hear music, the Linn DS must be connected to a hi-fi system

Step 4: Add in other network devices


You can now add in your other network devices. You may want to add a storage device with a built in medai server to your network. Note: This network is not restricted to Linn only devices.

Links to Other Systems

DS Entry Level System

DS High End System

Networking Glossary

Network Components


Linn DS/DSM Network requirements