Difference between revisions of "Selekt:Exakt crossover for Aktiv 2/3-way"

From LinnDocs
Jump to: navigation, search
(Created page with ":The Selekt DSM has Stereo 3-Way <u>Exakt Engine</u>. This allows you to use the Selekt DSM as 2-way or 3-way Exakt Crossover <!-...")
 
m
Line 15: Line 15:
 
Notes:
 
Notes:
 
:* The loudspeakers MUST be configured for Aktiv operation.
 
:* The loudspeakers MUST be configured for Aktiv operation.
:* Check the Konfig - Connection Help for the connection information e.g  
+
:* Check the Manage Systems - General for the connection information e.g  
:::[[Image:Majik_109_Cartridge_Exakt_Crossover.png|400px|link=Selekt:Majik 109 Exakt crossover wiring]]
+
:::[[Image:LAMS-Selekt-Aktiv-Connections.png|300px|link=LAMS-Selekt-Aktiv-Connections.png]]
 
:* This will work with both <u>[[#SELEKT_DSM_CARTRIDGE_-_2Ch_LINE_OUT|Line Level]]</u> and <u>[[#SELEKT_DSM_CARTRIDGE_-_POWER_OUT|Power Amplifier]]</u> Selekt cartridges.(Check the cartridge notes on mixing both types of cartridges in the same Selekt DSM)
 
:* This will work with both <u>[[#SELEKT_DSM_CARTRIDGE_-_2Ch_LINE_OUT|Line Level]]</u> and <u>[[#SELEKT_DSM_CARTRIDGE_-_POWER_OUT|Power Amplifier]]</u> Selekt cartridges.(Check the cartridge notes on mixing both types of cartridges in the same Selekt DSM)
 
:*
 
:*

Revision as of 13:52, 13 July 2023

The Selekt DSM has Stereo 3-Way Exakt Engine. This allows you to use the Selekt DSM as 2-way or 3-way Exakt Crossover
In Linn Account Manage systems go into the GENERAL tab and open the "Network Player" page. Finally go to Change Configuration and select the required loudspeaker;
LAMS-Change Speaker Configuration.png      LAMS-Select Mode-Stereo.png


These are examples of wiring a Exakt Crossover system in different Amplifier configurations:
The loudspeaker must be made Externally Aktiv and any shorting links/bridging strip across the loudspeaker back panel MUST be removed according to the amplifier/speaker wiring. Please refer to a Linn Retailer to ensure that this is done correctly
Tri-Amp-Selekt DSM.jpg

Notes:

  • The loudspeakers MUST be configured for Aktiv operation.
  • Check the Manage Systems - General for the connection information e.g
LAMS-Selekt-Aktiv-Connections.png
  • This will work with both Line Level and Power Amplifier Selekt cartridges.(Check the cartridge notes on mixing both types of cartridges in the same Selekt DSM)
  • No HDMI Switching module is required for this setup.
  • Do NOT mix Selekt power amplifier cartridges and Selekt Line-Level cartridges for Bi-Amp/Tri-Amp/Quad-Amp... system This is due to the Selekt power amplifier having a lower gain than other Linn amplifier. Therefore the feeds to loudspeaker inputs from the Selekt power amplifier and external power amplifier will be mis-matched in volume.