View source for Manage Systems

{{HIDE_PAGE_TITLE}}
<p style="color:black; font-family:times Black;font-size:24pt;">Kloud Konfig / Cloud Management / Manage systems</p>
= Introduction =

The Linn Manage systems/Kloud Konfig, will allow you to set up and re-Konfigure your Linn DS/DSM from a webpage. This can work with the [[Konfig_Manual|Linn Konfig app,]] except for Space Optimisation.

<font color=red>'''These options are only a summary of what <u>MAY</u> be available on your Linn DS/DSM. (Due to software improvements and hardware improvements, these may change at any time.)'''</font>

= Installation =
{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="#d5fdf4" |
{{Info:Linn_Account_Info}}
|}


=Music Systems=
<!-- [[image:Product_page.jpg|500px|right |link=]]
When you first open the Manage systems page, you will be given a list of Rooms assigned to your account.<br><br>

Click on '''EDIT SETTINGS''' or the room picture to Konfigure this room.

If the Linn DS has mains power and has internet access, then this Linn DS/DSM will be shown with a green dot on the right-hand side of the product image.
:E.g. on right, Study is ONLINE with the <span style="color:green;"><b>GREEN</b></Span> dot.
:But the Bedroom is offline with the <span style="color:grey;"><b>GREY</b></Span> dot.
<br><br><br><br><br><br><br>
--->


{{SO2:Room Selection}}
<br><br><br><br>
::::::::<hr style="width:50%">


=== GENERAL ===

{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="# E0 FF FF  " |
* '''System Name''' to change Room name

[[Image:LAMS General tab.jpg|right|450px| link=]]
====<u>DEVICES</u>====
=====Network Player=====
:To get the details of your Linn DS/DSM Model name, Serial number, MAC Address, Software version (also known as Firmware) & BOARDS. (These are the circuit boards and their identification numbers.)<br>
:This will also show any Exakt products, (Loudspeakers, ExaktBoxes and Phono stage - Urika-II are connected to this Linn DS/DSM)
:Hit the <b><big>></big></b> button to change the configuration
:* If you are using a [[Selekt_DSM_/0 | <u>Selekt DSM</u>]] you can select what the cartridges will be used for
::* Stereo: Stereo if more than one cartridge then this for the Exakt crossover
::* Stereo Passthrough: If the cartridges are used for Bi-Amping or Tri-Amping
::* Surround Passthrough: To configure the cartridges for 5.1 surround, (or 7.1 with additional Exakt products)
:;Note: You may have to bring the Linn DSM out of Standby to change configuration. 
::Check the <b>Standby</b> option further down this page. Slide the button LEFT to bring the Linn DS/DSM to turn <b>STANDBY <u>OFF</u></b> and <b>PRODUCT <u>ON</u></b>
<div class="zoom_img">[[image:Kloud-Konfig_Mini_Standby.png|centre|link=|400px]]</div>
<br>


====START-UP MODE====
:A number of different settings can be applied to customise the way your device starts up

====Startup Mode==== 
:Normally, your device will power up in '''Sleep''' (aka standby). 
:Select '''Active''' to skip sleep mode and go straight to playback mode on power up

====Auto Play==== 
:Normally, you must press play to start playing audio. 
:Change this setting to '''On''' to make your device play audio immediately when a source is selected (only relevant to Playlist, Radio, and Songcast)

====Startup Source==== 
:Normally, your device will start up on the last source you were listening to. 
:You can change this setting to make sure the device starts up on a specific source instead

====Wi-Fi====
: If applicable to your Linn DSM, this will enable or disable the Wi-Fi operation of your Linn DSM.
:;Note: If you have a cable/LAN connection to your Linn DSM when first powered on, then the Wi-Fi connection will be ignored. To use the Wi-Fi connection, disconnect any LAN connections and power cycle the Linn DSM. This will then use the Wi-Fi connection. (It will have configured for your Wi-Fi first. Check your product page in this wiki for more information)

====IPv6====
: If applicable to your Linn DSM, this switch the network operation to IPv6. (It makes no difference in the sound quality, It is only to support evolving ethernet networks).

====Bluetooth====
: If applicable to your Linn DSM, this will allow your Linn DSM to <B><U><i>receive</i></u></b> Bluetooth audio. This can be from your phone, Alexa etc
:;Note: It will have paired with your Bluetooth device first. Check your product page in this wiki for more information


====Analog Input Mode====
: This is for the [[Majik_DSM_/4_(2020_Variant) | <u>Majik DSM (2020 variant)</u>]]. This allows the Analogue input to be configured as a [[Cables_%26_terminations#RCA.2FPhono|<u>Line-level input</u>]], or for a Moving Magnet turntable cartridge.


====XLR Output====
:This is for the [[Klimax_DSM_/3_(2020_Variant)|<u>Klimax DSM (2020 variant)</u>]] to enable the XLR Output

====RCA Output====
:This is for the [[Klimax_DSM_/3_(2020_Variant)|<u>Klimax DSM (2020 variant)</u>]] to enable the RCA Output

====RCA Output Transformer====
:To electrically isolate the audio on the RCA sockets

====Standby====
:This is used to remotely switch on the products and set up the Exakt products remotely
:Turn <b>ON</b> to put the product <b><u>INTO</u></b> STANDBY
:Turn <b>OFF</b> to put the product <b><u>OUT OF</u></b> STANDBY


====REBOOT DEVICE====
:Pressing this text will force the Linn DS/DSM to restart

====RESTORE FACTORY DEFAULTS====
:Pressing this reset all the settings to default. 
:Note that this will also remove this product from your Linn Account, and it will have to be reattached to your account before any further setup

:This function is also possible using the <u>[[Linn_App_Manual#Restore_a_Linn_DS.2FDSM_to_Factory_Defaults |Linn App]]</u>

====UPLOAD DEVICE LOGS====
:This is for diagnostics only and should only be used when told to by Linn personnel.

====RECOVER DEVICE FIRMWARE====
:{{BlueBox | RECOVER | #RECOVER DEVICE FIRMWARE }} : This is to reload the software in to the Linn DS/DSM. It should only be used when instructed by Linn personnel. 
<br><br><br><br>

<hr style="width:50%; margin-left:25%; margin-right:25%;">
<br><br>
[[image:LAMS-Network_player.png|left|450px | link=]]
<br><br><br><br><br><br>
:* {{BlueBox | CHANGE CONFIGURATION | #RECOVER DEVICE FIRMWARE}}: to add/remove/change your speaker definition.<br>
::'' You will need to '''REMOVE''' your existing speakers first before you can change these to a different speaker''<br>

<br><br><br><br><br><br><br><br>
<hr style="width:50%; margin-left:25%; margin-right:25%;"><br><br>
[[File:Kloud_-_General_-_Exakt.png|450px|right| link=]]
<br><br><br><br>

=====Exaktbox=====
:: Hit the <b><big>></big></b> button to change the configuration
:::* Under Speakers, press  <b><big>></big></b>  to change the Exakt filter profile used.
:::* {{BlueBox | CHANGE CONFIGURATION |#Exaktbox}}: to add/remove/change your speaker definition.<br>
:::* Also shows the <b><small>CONNECTION GUIDE</small></b>


<br><br><br><br><br><br><br>
<hr style="width:50%; margin-left:25%; margin-right:25%;"><br><br>
::<div class="zoom_img">[[File:Kloud-General-Phono Stage.png|450px|right|link=]]</div>

=====Phono Stage (Urika-II)=====
Hit the <b><big>></big></b> button to get details of the Urika-II
: Hit the <b>Cartridge </b> button to get details of the Urika-II
::This page will allow you to 
::::* Select a different cartridge - {{BlueBox | CHANGE CARTRIDGE | }} 
:::or
::::* Adjust the current Cartridge settings - {{BlueBox | CHANGE CONFIGURATION | }}
:::::: Exakt Input definition (1 or 2)
:::::: Equalisation Filter: RIAA 
:::::: Gain (dB): to adjust the photo stage gain
:::::: Input Resistance:  Resistive load presented to the cartridge
:::::: Input Capacitance: Capacitance load presented to the cartridge

<br><br><br>
<hr style="width:50%; margin-left:25%; margin-right:25%;"><br><br>

{{:Configuration:Change_Configuration}}
<hr style="width:50%; margin-left:25%; margin-right:25%;"><br><br>

====Test Tones/Volume Offsets====
::<div class="zoom_img">[[image:Manage_Systems-Volume_Offsets.png|300px|right| link=]]</div>
This allows you to trim the channels. Hit the Play button against each channel (marked in RED) and adjust the channel trim level.<br>


<br><br><br><br><br>

|}

==Setting up Exakt loudspeakers for first time==
{{:Manage_Systems:Speaker_setup|1= Exakt speaker(s)}}

== SPACE ==
{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="#FF FA FA " |
This tab will only appear if you have speakers assigned in the GENERAL tab.<br><br>
Detail of how to use this is covered with [http://docs.linn.co.uk/wiki/images/8/82/Linn_Account_Space_Optimisation.pdf ''' Linn Account Space Optimisation User Guide'''] in [[Linn_Account_Space_Optimisation|this section]]

:You may get the warning below. This is stating that the Linn DS/DSM is in Standby and you will have to bring it out of Standby, turn Standby OFF, i.e. turn product ON to load/apply Space Optimisation. Press the <span style="background:black; color:cyan;padding:4px;"> STANDBY OFF </span>  to turn the product ON
<div class="zoom_img">[[image:LAMS-SO_Standby_warning.png|centre|link=]]</div>
<br><br>
;Filtering Optimisations
:If you have multiple Space Optimisations for this product, for example as a Retailer with multiple Dem rooms and speakers. You can filter the Space Optimisations to give a better list of the configuration you are using.
:<div class="zoom_img">[[image:SO_Filter.png | left | 400px|link=]]</div>
<br><br>
{{TAB4}}<b>Room</b>: To filter using the Room design used.
<br><br>
{{TAB4}}<B>Shared By</b>: Filter by who has shared the Space Optimisation.
<br><br>
{{TAB4}}<b>Tag</b>: If you edit the DETAILS of a Space Optimisation<br> 
{{TAB4}} {{TAB4}}* scroll down to the bottom of this page and this show the Tag option. 
<br>
{{TAB4}} {{TAB4}}* You can add multiple Tags, of your own text, for your own reference.

<br><br><br><br>
|}

== DISPLAY ==
{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="#F0 F8 FF " |
<!--<font color=red>--->'''These options are only a review of what <u>MAY</u> be available on your Linn DS/DSM.'''<!--</font>-->

<div class="zoom_img">[[Image:LMAS Display tab.jpg|left|350px|link=]]</div>
::* '''Brightness''': If '''Auto-Brightness''' is turned off, then this will allow you to set the brightness of the Linn DS/DSM display.

:* '''Auto-Brightness''': Enabled will allow the Linn DS/DSM to detect the external brightness via it front panel sensor and adjust the display brightness accordingly.

:* '''Scroll Text''': When enabled, this will scroll the text on the front panel when media changes.<br>
:* '''Sleep Mode''': Put the display to sleep if there are no display updates after a certain amount of time.<br>
:* '''Front Panel Buttons''': This will stop ALL front panel buttons working, including SLEEP. This is to stop kids from playing with the buttons and turning up your volume when you are not there.<br><br>
;* '''Power Indicator (Active Mode)''': Illumination control of either the Linn DSM name or front glow when out of standby
:* '''Power Indicator (Sleep Mode)''': Illumination control of either the Linn DSM name or front glow when in standby 
:* '''Wake Display on Proximity Detection''': if a hand is brought close to the front panel or dial, then this will bring the display out of sleep mode
|}

== SOURCES ==
{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="#FF F0 F5 " |
This section will allow renaming the inputs and make the inputs invisible. These of these Source options are dependent on the model of Linn DS/DSM and not available for your Linn DS/DSM .<br>

<div class="zoom_img">[[image:LAMS_Sources_tab.jpg|300px| right | link=]]</div>
Click on the [[image:LAMS_Sources_Visible_tab.jpg | link=]] icon to make the input invisible from the front panel selection and the Kazoo app.
<br><br>
On sources with the [[image:LAMS_Sources_Expand.jpg | link=]] icon, click on this to expand the settings.<br>
Some of these settings can be:
* '''Name''': the name displayed on Kazoo/Linn app/ front panel display.
* '''Maximum Number of Tracks''': This is mainly used for control systems that only have a smaller playlist. Max value 1,000 tracks.
* '''Unity Gain''': Turns OFF the volume control on this input only.<br>
* '''Volume Offset''': this to raise or lower the comparative volume level on this input compared to other inputs. E.g. an LP12 may require a +5dB offset, but a CD player may be -8db
* '''INPUT LEVEL''': to define the incoming source input level. Set the analog input level for the given source in Vrms. This value should match the output level of the corresponding external source.<br>
* '''Digitise''': When enabled, this source is Space optimised and shared to other Rooms with Songcast. Otherwise, no digital processing is carried out.
* <b> Bypass Transformer</b>: Only for the Klimax DSM. This allows you to bypass the internal source audio transformer and directly feed in the Klimax DSM.
* <u>[[Songcast Delay mode|'''Delay mode''']]</u>: to define the Songcast delays to other rooms.<br>

<br/>

|}

== MUSIC ==
{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="#FF FF E0" |
This section is to define the desired audio quality from the streaming services. (Internet radio streams).<br>

{{Info:Spotify Streaming Quality}}
::::::::<hr style="width:50%">


{{Info:Roon_Settings}}
::::::::<hr style="width:50%">

{{Info:Tidal Streaming Quality}}
::::::::<hr style="width:50%">
<br><br>

{{Info:Qobuz_Audio_Quality}}
::::::::<hr style="width:50%">
<br><br>
{{Info:Deezer_Audio_Quality}}

::::::::<hr style="width:50%">
<br><br>

===CALM RADIO===
Switch this ON to enable [https://calmradio.com Calm Radio] in the <b>MUSIC</b> tab
<br><br>
::::::::<hr style="width:50%">

{{info:RADIO PRESETS PROVIDER}}
<br><br>

::::::::<hr style="width:50%">
===TUNEIN RADIO===
:* Scroll to '''TuneIn Radio'''
:* Enabled this service
:* Enter/rename your TuneIn Username  into the "TuneIn Username" field.
<br><br>

::::::::<hr style="width:50%">
|}
<br><br>

==Surround==
{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="#F8 F8 FF " |
{{;Manage_System:Dolby/DTS}}
|}

== OUTPUTS ==
{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="#FF F5 EE" |
<!--<font color=red>--->'''These options are only a review of what <u>MAY</u> be available on your Linn DS/DSM.'''<!--</font>-->
<div class="zoom_img">[[image:LAMS_Output_tab.jpg‎|400px|right|link=]]</div>
<u>'''DIGITAL OUTPUT MODE'''</u><br>
This refers to the Digital output (if fitted/enabled) what outgoing sample rate will be. There is NO volume control on this output.
* '''Raw''': Digital output  is the original bit rate.
* '''88/96kHz''': Digital output is the either 88.2k or 96k.
* '''176/192kHz''':Digital output is the either 176/2k or 192k.
* '''Post EQ: 192kHz''': Digital output for front left/right speakers with volume control and Space Optimisation.<u>(Only available on some products and ONLY applicable to <b>SPDIF1</b>.)</u>
* '''Disabled''': No Digital output.

===Analogue output===
When Exakt speakers are set up on this Exakt DSM, then the analogue output is disabled, as this audio will <u>NOT</u> be in sync with the Exakt audio. If you want to have both analogue and Exakt front L/R outputs, this must be enabled. (Default: DISABLED)

===SPDIF Mode===
On some products, the SPDIF1 socket can be configured for an Output, instead of the default input. The Input or Output mode is set here.
:Set to <b>Output</b> and Digital Output mode Post EQ, this can also be used with Digital speakers.

===For the Selekt Edition Subwoofer===
{{:MS_SelektEd_Subout}}


|}
<br><br>

== VOLUME ==
{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="#FD F5 E6 " |
<!--<font color=red>--->'''These options are only a review of what <u>MAY</u> be available on your Linn DS/DSM.'''<!--</font>-->
<div class="zoom_img">[[image:LAMS_Volume_tab.jpg|300px|right|link=]]</div>
<br><br>
* '''Volume Control''': To enable/disable the volume control on ALL inputs. This will also disable your Exakt speakers.
<br><br>
* '''Startup Volume (dB)''': Volume settings when you bring the Linn DS/DSM out of Sleep/Standby.

* '''Balance''': Left/right balance setting

<br><br>
* '''Max Volume(%)''': The highest volume level the user can go to. <br>
Note: Volume 80 is unity gain, (what comes in goes out) any higher volume may distort the audio.
<br><br>
<u>'''HEADPHONES'''</u>
This can make your headphone output quieter or louder for that volume setting. This can be adjusted so that with quiet headphones, if you unplug them the speaker volume is not too loud at the same volume setting.
<br><br>
<u>'''LOWER ANALOG OUTPUT'''</u>
This is done to provide a finer volume control. That is, the audio output is attenuated, but you will have a smaller change in audio volume for each step in the Volume control. 
<br><br><br><br><br><br>
|}

== PRIVACY ==
<u>'''Send Anonymous Usage Stats'''</u>
Enable to allow your Linn DS/DSM to send usage data to Linn. This will help us decide where to allocate time for new features or improvements.

'''NOTE: No personal information is sent to Linn as a result of this option being checked.'''

<u>'''Send Crash Reports'''</u>
Enable to allow your Linn DS/DSM to send crash data to Linn in the event of a failure. This will help us in diagnosing and addressing existing issues. This is used by the Linn Helpline and Service department to check and what has caused the Linn DS/DSM to reboot itself.

If you select No, this makes it more difficult to help diagnose remotely what has happened to your product.

'''NOTE: No personal information is sent to Linn as a result of this option being checked.'''
<br><br>

== REMOTE CONTROL ==
{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="#F0 FF F0 " |
<u>'''BUTTONS'''</u>
This is for use with the [[REM_020| <u>REM020 Remote control</u>]] and select which button on this remote control will select which source.


<u>'''ACCEPTED COMMANDS'''</u>
The Linn DS/DSM use Philips RC5 remote control protocol. This will mean that some other manufacturer's remote control may also control the Linn DS/DSM. This option will tell the Linn DS/DSM what commands to accept.


<u>'''Star Key Held Action'''</u>
From Davaar107 firmware this will allow you to control either Display brightness , Lip-Sync, Balance, Analog Output Mode & DSP Decode mode, As defined on this setup page. (The options will vary from product to product.)

<br><br><br>
|}

== HDMI ==
{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="#f8f9fa" |
<!--<font color=red>--->'''These options are only a review of what <u>MAY</u> be available on your Linn DS/DSM.'''<!--</font>-->
=== All Linn DSM with HDMI input sockets===
<u>'''HDMI'''</u> 
* Totally disable HDMI sockets from operation


<u>'''Pass-Through (Sleep)'''</u>
* When the Linn DSM is in Sleep mode, the last HDMI audio/video is passed through to the TV/Projector.


==="HDMI 2.0"/"ARC only" Products===
<u>'''Turn HDMI Off in Sleep'''</u>
* When enabled, this will stop HDMI connection to the TV/Projector when the Linn DSM in in Sleep. 

<u>"eARC mode"</u>
* Auto detection of eARC connection or
* Off/Disable eARC and only use ARC connection


<u>'''CEC'''</u>
* Enable '''C'''onsumer '''E'''lectronics '''C'''ontrol of the Linn DSM


<u>'''CEC Auto Source / Power Control'''</u>
*Enable to auto-switch to TV ARC connection and action TV standby if CEC commands are available.
<br><br><br>
|}

== WI-FI ==
{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="#FD F5 E6 " |
<!--<font color=red>--->'''These options are only a review of what <u>MAY</u> be available on your Linn DS/DSM.'''<!--</font>-->
<br><br>
:* '''Wi-Fi Enabled''': To enable/disable the Wi-Fi option on your Linn DSM. (Any changes will require the Linn DSM to be rebooted before setup of the Wi-Fi).
<br><br>
;Wi-Fi Status
:* '''Current Status''': Shows the current status of your Wi-Fi connection 

:* '''Network Id''': The SSID name used to discover the Linn DSM during setup

<br><br>
:* '''CONFIGURE''' button: This will allow you to 
::** <b>Choose Network</b>: View the existing local networks , select an SSID, then add the password.
::** <b>Manually enter Network Details</b>: If you know the SSID and password of your Wi-Fi, then this can be set up manually.
::** <b>Remove Network</b>: to remove these Wi-Fi setting from your DSM.


<b>NOTE: If you are using a wired LAN connection on you Linn DSM. This wired connection will have to be unplugged and the Linn DSM power-cycled BEFORE it will use the WI-FI connection. </b><br>
Please remember to unplug the LAN and POWER-CYCLE the Linn DSM before using the Wi-fi connection
<br><br><br><br><br><br>
|}

== ADVANCED ==
{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="#eaf3ff" |
<!--<font color=red>--->'''These options are only a review of what <u>MAY</u> be available on your Linn DS/DSM.'''<!--</font>-->
<div class="zoom_img">[[image:LAMS_Advanced_tab.jpg|right|350px|link=]]</div>
<br><br>
* '''Video Sync Delay (ms)''': When a source/input has a "Video Sync" delay, this is the delay used. This can also be adjusted by the IR handset.

<u>'''REAR LEDs</u>'''
* '''Ethernet LEDs''': When disabled, these ethernet sockets will turn OFF after initial boot-up/power ON.

* '''Exakt LEDs''': When disabled, these Exakt sockets on the rear of the Linn DS/DSM will turn OFF after initial boot-up/power ON.

<u>'''SONGCAST</u>'''
* '''Songcast''': Turned OFF the Linn DS/DSM will no longer share its Music to other Rooms.

<u>'''Protocol</u>'''

* '''Multicast''': This is a network dependant setting that should only be changed if the network/LAN can support this.

* ''Unicast''': Default setting. This allows this Linn DS/DSM audio to be shared with up to FIVE Songcast rooms.

* '''Songcast Port''': This should NOT be adjusted and only used for reference to network used.

* <B> Verbose Device Logging </b>: Enable at request of support team to enable verbose device logging. Disable at all other times.


<u>'''Software Updates</u>'''
* '''Channel'''. This allows you to select either the main release <b>Stable (default)</b> or the <b>Beta</b> development release.
:The Beta release is only for <u>testing</u> a software release before official release and may have some bugs in it. 

* '''CI Gateway'''. To enable/disable this service for [[Crestron]] & [[Control4]] use. 

<u><b>MANUAL FIRMWARE REPROGRAM</b></u>
* <b>Manifest Uri</b>: This is the web address of the Manifest that will present the new firmware



:{{BlueBox | RECOVER}}: Force the Linn DS/DSM to reload the latest firmware with factory reset. 



<hr>
====Custom Filters====
{{:Manage_System:Custom-Filters}}

<!--====REMOVE MUSIC SYSTEM====
This will remove the Linn DS/DSM from your Linn Account and allow it to be attached to another Linn Account.
<br><br>--->
|}

== DEVELOPER ==
Ignore this section, this is for software development.
<br />


==SHARING KONTROL ==


You can share your Linn DS/DSM with another Linn-Account. This can be used for Retailers to give remote support for their customers. This is done by the customer granting access to the Retailer, or vice versa. But note that if the Linn DS/DSM is reset to Factory Defaults <RESTORE>, this action will remove the Linn DS/DSM from ALL Linn accounts.


::Click on the [[Image:LAMS_three-Dots.png|link=]] and select
:::<b>SHARE CONTROL</b> with another Linn Account.
::::* Add the Linn Account emails and your name to the other Linn account. 
::::* You can choose to share this linn DS/DSM for a limited time 12 hours/48hours or forever-Indefinite. Or until the Linn DS/DSM has a factory reset-RESTORE. 
::::* You can also share control of this Linn DS/DSM with other Linn Accounts by repeating the SHARE CONTROL button and each time stating a new Linn Account
:::<b>TRANSFER CONTROL</b>: to transfer primary control ownership to another Linn Account. (This still has the option to share this with your Linn Account.)
:::<b>REMOVE</b>: to remove this Linn DS/DSM from your Linn Account.
:::<b>MANAGE ACCESS</b>: If you have shared your Linn DS/DSM with another Linn Account(s) then you can selectively REVOKE/remove these Accounts access to your Linn DS/DSM.
:::<b>END ACCESS</b>: If you have been granted access to another Linn-Accounts Linn DS/DSM, you can remove access from your Linn Account
<br><br>
:[[image:Shared-Control.png|50px|left|link=]] Signifies that this Linn DS/DSM has shared control by more than one Linn Account. If shared TO this account, then it states who has shared it.
<br><br>
:In the example below:
:::<b>Merlin Kustom DSM</b>: is linked to the current Linn Account only
:::<b>Merlin Lounge</b>: is linked to the current Linn Account <u><i>AND SHARED</i></u> with another Linn Account. You can share this to multiple Linn Accounts and well as be removed from other Linn Account(s).Or finally remove this Linn DS/DSM from your account. 
:::<b>TV Room</b>: has been SHARED with this Linn Account. This only has the option to return full Konfiguration to the original Linn Account

[[Image:Kloud-Konfig sharing.png| ]]



::::::::<hr style="width:50%">

==Filtering the Music systems using the Linn Account that has been shared from/to==

:If you have a lot of Music systems to manage, and you have either been given sharing access. Or, if you have shared with another Linn Account, you can filter the listing.
:Press the [[image:Kloud-Konfig_Filter_button.png |link=]] to open the filter window and select the Linn Account to up wish to see.
[[image:Kloud-Konfig_Filter_Music_systems.png|800px |centre|link=]]


::::::::<hr style="width:50%">

=Room Designs=
:This is the Room library used in Space optimisation. This will allow you to Create / Edit rooms that are used in new or existing Space Optimisations.
Check <u>[[Linn_Account_Space_Optimisation]]</u> for more information.

=Software Updates =
{{Manage_Systems:Software_Updates}}

=Notifications=
:This will report any downtime or changes to the Manage system pages


=FAQ's=
====My Linn DS/DSM will only show offline even though it is power on====
This can be caused by a loss of internet access on the Linn DS/DSM.<br>
Try the following:
# Power cycle the Linn DS/DSM. That is, remove mains power from the Linn DS/DSM for a minimum of 30 seconds and reapply mains. 
# Wait for approx 5 minutes for the Linn DS/DSM to power on and do house-keeping.
# On the manage systems web-browser, press F5 or SHFT-F5 to refresh the screen.<br>


====How do I remove a Linn DS/DSM from my Linn Account====
{{Info:Linn_Account_Removal}}