Template:Setup:Selekt Edition Sub

From LinnDocs
Revision as of 07:51, 18 July 2023 by Yoda (talk | contribs)
Jump to: navigation, search

This will ONLY work in Stereo configurations. This cannot be used in Surround Playback.

These outputs are to give Stereo music enhancement on the Selekt DSM Edition using the Selekt cartridges for L+R feed..
Examples

Edition with Stereo SubOut.png- Edition with Mono-SubOut1.png

In Manage Systems - Output options
Subwoofer

ON To give the 2.1ch / 2.2ch playback

Disable For Stereo ONLY playback of Stereo sources
Filter

ON SUBOUT set by crossover frequency 60Hz, 80Hz, 120Hz .

Disable SUBOUT crossover frequency 1kHz, the LHC/RHC audio is flat.


Crossover frequency

60: Crossover frequency 60Hz

80 Crossover frequency 80Hz

120 Crossover frequency 120Hz


Type
In both case below, the audio below the crossover frequency is sent to the sub outs,

Bass redirect: Audio above that frequency is sent to the cartridge and Exakt speakers

Bass Reinforcement Audio to the cartdiges and Exakt speakers is flat.



Channels ,

Mono: Mono for a single Subwoofer (2.1ch)

Stereo For two Subwoofers (2.2ch)
Notes
  • Only works with Stereo playback
  • Does NOT work with DSD playback