Template:General:Series3-301 TI Indicators

From LinnDocs
Revision as of 07:27, 17 October 2019 by Yoda (talk | contribs) (Series3 Touch Interface notifications)
Jump to: navigation, search

Series3 Touch Interface notifications

Top plate indicator.png
10. Volume indicator
Click for more....
. Primarily the outer ring is the volume level indicator.
This also has other indications:
⊕ Initial startup/power on, the full volume ring will pulse slowly. This indicates that the Series3 is either
⁃ Starting up, this typically takes 20-40seconds, or
⁃ Doing a software update. This should take less than 10minutes (If this takes longer then double check that you have Ethernet cable plugged into the LAN socket and NOT the Exakt socket Exakt-Sender.png)
⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected
⊕ lights scanning from from top to bottom, bottom to top indicate with in Bluetooth scan or Wifi Scan
11. Linn icon
Click for more....
Top-Plate notifications-Close-UnMute.png


Normal operation with the Series-3 playing music





Top-Plate notifications.png


Linn symbol has a lower brightness level the Series3 speakers are MUTED





Series3-Exakt-Find.gif Linn symbol flashing shows that the Series3 searching for a partner Series3 speaker




Top-Plate notifications-NoNetwork.png

If you do not have a live Wifi/network/LAN connection on the Series-3 then the Linn symbol on the dial will go red.
If you are select the HDMI-ARC input or Bluetooth to the Series3 speaker this red light will go out

If your network cable is plugged in and your network/LAN is alive then check that you have the network/LAN cable plugged into the LAN socket and NOT the Exakt socket.