Template:General:Series3-301 TI Indicators

From LinnDocs
Revision as of 15:08, 16 October 2019 by Yoda (talk | contribs)
Jump to: navigation, search

Series3 Touch Interface notifications

Top plate indicator.png
10. Volume indicator
Click for more....
. Primarily the outer ring is the volume level indicator.
This also has other indications:
⊕ Initial startup/power on, the full volume ring will pulse slowly. This indicates that the Series3 is either
⁃ Starting up, this typically takes 20-40seconds, or
⁃ Doing a software update. This should take less than 10minutes (If this takes longer then double check that you have Ethernet cable plugged into the LAN socket and NOT the Exakt socket)
⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected
⊕ lights scanning from from top to bottom, bottom to top indicate with in Bluetooth scan or Wifi Scan
11. Linn icon
Click for more....
Top-Plate notifications-Close-UnMute.png


Normal operation with the Series-3 playing music





Top-Plate notifications.png


Linn symbol has a lower brightness level the Series3 speakers are MUTED





Series3-Exakt-Find.gif Linn symbol flashing shows that the Series3 searching for a partner Series3 speaker




Top-Plate notifications-NoNetwork.png

If you do not have a live Wifi/network/LAN connection on the Series-3 then the Linn symbol on the dial will go red.
If you are select the HDMI-ARC input or Bluetooth to the Series3 speaker this red light will go out

If your network cable is plugged in and your network/LAN is alive then check that you have the network/LAN cable plugged into the LAN socket and NOT the Exakt socket.