Difference between revisions of "Template:General:Series3-301 TI Indicators"

From LinnDocs
Jump to: navigation, search
m
m
Line 21: Line 21:
 
:If your network cable is plugged in and your network/LAN is alive then check that you have the network/LAN cable plugged into the LAN socket and <u>'''NOT'''</u> the Exakt socket.
 
:If your network cable is plugged in and your network/LAN is alive then check that you have the network/LAN cable plugged into the LAN socket and <u>'''NOT'''</u> the Exakt socket.
 
<br><br><hr><br>
 
<br><br><hr><br>
:[[File:Selekt-Fallback-50px.gif]]  This means that the Selekt DSM is in FALLBACK mode.
 
:Fallback is a state that means that the product is waiting for a software update. To stop this flashing either:
 
:* Power cycle (Switch Mains Off for 10seconds and then switch mains On) and leave the Selekt DSM to startup for approximately 1min.
 
::or
 
:* Use the [[Konfig_Manual|<u>Konfig</u>]] software to upload software in to the Linn Selekt DSM
 
  
 
{{Hidden text end}}
 
{{Hidden text end}}

Revision as of 14:34, 16 October 2019

Top plate indicator.png
10. Volume indicator
Click for more....
. Primarily the outer ring is the volume level indicator.
This also has other indications:
⊕ Initial startup/power on, the full volume ring will pulse slowly. This indicates that the Series3 is either
⁃ Starting up, this typically takes 20-40seconds, or
⁃ Doing a software update. This should take less than 10minutes (If this takes longer then double check that you have Ethernet cable plugged into the LAN socket and NOT the Exakt socket)
⊕ Press any of the Favourite/PIN buttons, the volume indicator will illuminate beside this button to show that it has been selected
⊕ lights scanning from from top to bottom, bottom to top indicate with in Bluetooth scan or Wifi Scan
11. Linn icon
Click for more....
Top-Plate notifications-Close-UnMute.png


Normal operation with the Series-3 playing music





Top-Plate notifications.png


Linn symbol has a lower brightness level the Series3 speakers are MUTED





Top-Plate notifications-NoNetwork.png

If you do not have a live Wifi/network/LAN connection on the Series-3 then the Linn symbol on the dial will go red.
If you are select the HDMI-ARC input or Bluetooth to the Series3 speaker this red light will go out

If your network cable is plugged in and your network/LAN is alive then check that you have the network/LAN cable plugged into the LAN socket and NOT the Exakt socket.