Template:General:Series-3 Touch Interface

From LinnDocs
Revision as of 09:38, 16 October 2019 by Yoda (talk | contribs)
Jump to: navigation, search
Series3-301 touch plate functions
Top plate buttons.png
Buttons keys
Any Button - Wake Series3 301 from Standby/Sleep
  1. Select the Favourite media/PIN# 11 or setup Self configure with button6Self Configure
  2. Select the Favourite media/PIN# 21 or setup WiFi with button5WPS Wifi Setup
  3. Select the Favourite media/PIN# 31 or setup Bluetooth with button4Bluetooth Setup
  4. Select the Favourite media/PIN# 41 or setup Bluetooth with button3Bluetooth Setup
  5. Select the Favourite media/PIN# 51 or setup WiFi with button2WPS Wifi Setup
  6. Select the Favourite media/PIN# 61 or setup Self configure with button1Self Configure
  7. Volume DOWN2 - decrease volume
  8. Volume UP 2 - increase volume
  9. Multifunction button3: Pause/Play, Mute/Unmute, Standby


Notes
1. FAVOURITE/'PIN BUTTONS'1 - Personalised media selection Pins 1-6
Click for more....
1 A quick press of this button will select your PIN. For more information on PINS check the FAQ-What is a PIN
2. Volume button action2
Click for more....
Quick press/Tap action
  • Increment or decrement the volume level by one step.
Press and HOLD
  • continuously Increment or decrement the volume level until button has the volume level has reached 0 or maximum level.
3. Multifunction button3 Play/Pause, Mute/Umute, Standby
Click for more....
Quick press/Tap action
  • Toggle between Pause/Play if you are playing a Music stream such as a Playlist, Tidal, Qobuz, Spotify
  • Toggle between Mute/UnMute if you are playing a Radio station, HDMI ARC input or Bluetooth connection
Press and HOLD
  • Go into Standby/Sleep mode
Self Configure This is when you want to add or remove a Series3-302 speaker.
  1. Connect the 302 using an Exakt-link cable to the 301, (plus Mains cable to the 302).
  2. Press and HOLD both buttons 1 & 6 on the Series3-301 until all of the Volume indicator lights illuminate for a few seconds and return back to volume level display.


WPS Wifi Setup This is to setup the Wifi connection using the front panel buttons. This can also be setup using the Konfig software on a PC/MAC.
  1. On your ISP Router, press the WPS button to start the connection process. (Check your Router manual on how to do this as different Routers have different methods on how to perform a WPS process).
  2. On the Series3-301, press and HOLD buttons 2 & 5 until the Series3-301 volume indicators start moving to show a scan.
  3. Process is complete with the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.
Bluetooth Setup This is pair up your Bluetooth device, (iPhone, iPad, Alexa Echo, Android...), to the Series3-301.