Template:General:Series-3 Touch Interface

From LinnDocs
Jump to: navigation, search

Series3-301 Touch Interface

Top plate buttons.png
Buttons keys
Any Button - Wake Series3 301 from Standby/Sleep
  1. PIN-1.pngSelect the Favourite media/PIN# 11 or setup Self configure with button6Self Configure
  2. PIN-2.pngSelect the Favourite media/PIN# 21 or setup WiFi with button5WPS Wifi Setup
  3. PIN-3.pngSelect the Favourite media/PIN# 31 or setup Bluetooth with button4Bluetooth Setup
  4. PIN-4.pngSelect the Favourite media/PIN# 41 or setup Bluetooth with button3Bluetooth Setup
  5. PIN-5.pngSelect the Favourite media/PIN# 51 or setup WiFi with button2WPS Wifi Setup
  6. PIN-6.pngSelect the Favourite media/PIN# 61 or setup Self configure with button1Self Configure
  7. Volume DOWN2 - decrease volume
  8. Volume UP 2 - increase volume
  9. Multifunction button3: Pause/Play, Mute/Unmute, Standby


Notes
1. FAVOURITE/'PIN BUTTONS1 - Personalised media selection Pins 1-6
Click for more....

PIN-1.pngPIN-2.pngPIN-3.pngPIN-4.pngPIN-5.pngPIN-6.png

1 A quick press of this button will select your PIN. For more information on PINS check the FAQ-What is a PIN
2. Volume button action2
Click for more....
Quick press/Tap action
  • Increment or decrement the volume level by one step.
Press and HOLD
  • continuously Increment or decrement the volume level until button has the volume level has reached 0 or maximum level.
3. Multifunction button3 - Play/Pause, Mute/Umute, Standby
Click for more....
Quick press/Tap action
  • Toggle between Pause/Play if you are playing a Music stream such as a Playlist, Tidal, Qobuz, Spotify
  • Toggle between Mute/UnMute if you are playing a Radio station, HDMI ARC input or Bluetooth connection
Press and HOLD
  • Go into Standby/Sleep mode
Self Configure -Configure for use with or without Series3-302 speaker
Click for more....
      Series3-Configure-125px.gif‎ Add/Remove a Partner speaker setup procedure

(This will change the Series3-301 from MONO to STEREO and use the Series3-302 as the other STEREO channel) :

1. Connect or remove the Series3-302 speaker as required:
     * Stereo mode:Connect the Series3-302 using an Exakt-link cable to the Series3-302
     * Single (mono) mode: Disconnect the Series3-302 Exakt-link from the Series3-302
2. Press and HOLD both buttons PIN-1.png & PIN-6.png on the Series3-301 until half of the Volume indicator lights illuminate
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup


WPS Wifi Setup -Initial setup for use with your Wifi using WPS
Click for more....
This is to setup the Wifi connection using the front panel buttons.
      Wifi-Scan-125px.gif WPS WIFI Setup procedure:
1. On your ISP Router, press the WPS button to start the connection process.
     * Check your Router manual on how start WPS pairing.
2. On the Series3-301 , press and HOLD buttons PIN-2.png & PIN-5.png until the volume indicators start moving to show a scan.
(More detail of the buttons and location can be found HERE
3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.
Or
      Alternative Wifi Setup Method via Web Browser:
1. With the Series3-301 DSM out of Sleep mode
2. Go to the Wireless settings on your device (e.g. iPad)
3. Find the Series-301 on the list of available networks. It will be called Series3- <serial number>
4. Select this as the wireless network
5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
6. The Series3 Wifi Setup page should now be displayed
7. Select the Wifi network you want to connect to
8. Enter the passkey for the Wifi network
9. Click on 'Set Network'

Note: To CLEAR/REMOVE any Wifi settings On the Series3-301 , press and HOLD buttons PIN-1.png, PIN-2.png & PIN-5.png for 2 seconds and this will forget your Wifi settings.

Bluetooth Setup -Initial setup to pair up your Bluetooth device, (iPhone, iPad, Alexa Echo, Android...), to the Series3-301
Click for more....
      Bt-scan-125px.gif‎ Bluetooth Setup procedure:
1. On the Series3-301, press and HOLD buttons PIN-3.png & PIN-4.png, until the volume indicator display starts it scan display
(More detail of the buttons and location can be found HERE
2. On your Bluetooth device, setup this up for pairing and look for Linn Series 3.
3. This Bluetooth pairing process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

The On-line setup guide can be found https://www.linn.co.uk/setup