Template:Backpanel:Majik DSM 2020

From LinnDocs
Revision as of 09:19, 17 August 2020 by Yoda (talk | contribs)
Jump to: navigation, search

Majik DSM (2020 variant)

Majik DSM 2020 Connectors.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  3. ETHERNET - To connect to a network (100Base-T)
  4. USB6 - To connect to a PC/MAC for Class 2.0 PCM USB Audio playback
  5. DIGITAL INPUTS/OUTPUT (Spdif)5 - To connect sources with Spdif (RCA) digital sources. This can be configured as a SPDIF source with no volume control
  6. DIGITAL INPUTS (Toslink)5 - To connect sources with Toslink (optical) digital outputs.
  7. ANALOGUE INPUTS (RCA MM/line level)1 & 2 - To connect to Turntable with MM cartidge or source with RCA analogue output.
  8. PHONO GROUND - To connect to a turntable grounding terminal.
  9. ANALOGUE OUTPUTS (RCA,variable level)4 - To connect to an optional external power amplifier.
  10. SPEAKER OUTPUTS - To connect to loudspeakers7
  11. POWER SWITCH - Mains power switch
  12. HDMI OUTPUT with ARC (HDMI)8 - To connect to a TV (This Majik DSM supports Audio Retun Channel (ARC))
  13. HDMI INPUTS - To connect sources with 1.4 & 2.08 HDMI outputs


Notes:
1 Analogue inputs: 2V rms, impedance 10kΩ
2 with ADC of 192kHz/24bit
3 RCA MM:

MM input impedance 47k, 100pf
MM max voltage (1kHz): 67mV rms. (Gain +40dB)

4 Analogue Output:

RCA - 2V rms, 300Ω

5 Digital inputs: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

SPDIF socket can be converted to an SPDIF output that will support up to 192KHz. This output is a fixed volume control output, that is, Volume Up/Down had no effect on this output.

6 USB Supported Sample rates: 44.1, 48, 88.2, 96, 176.4, 192
7 Max output power: 100W/channel into 4Ω load, 50W / channel into 8Ω load
8 HDMI 2.0 Supports HDCP 2.2 up to and including 60Hz UHD. We recommend using HDMI Certified cables