Difference between revisions of "Sneaky DSM"

From LinnDocs
Jump to: navigation, search
(Installation)
(HDMI Setup)
Line 39: Line 39:
 
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]
 
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]
  
== '''HDMI Setup''' ==
+
== '''Audio Latency''' ==
  
[[HDMI Setup]]
+
[[DSM Audio Latencies Explained]]
  
 
== '''Network Setup''' ==
 
== '''Network Setup''' ==

Revision as of 10:33, 5 March 2015

SneakyDsmMain.png

Getting Started

www.linn.co.uk/go/sneaky

Product info

  • Product Name: Sneaky DSM
  • Date of Introduction: February 2013
  • Type: Integrated digital music player, pre-amplifier, and power amplifier
  • Dimensions: 350 mm (width) x 54.5 mm (height) x 215 mm (depth)

Support

Linn Support Site

Latest software

Latest software releases

Open source software

Manuals

Konfig manual

Kinsky Desktop manual

DSM Remote control manual

Safety Information

Warranty Terms and Conditions

Audio Latency

DSM Audio Latencies Explained

Network Setup

DS Budget System Setup

DS Entry Level System Setup

DS High End System Setup

Back Panel Connections

SneakyDsmRear.png
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK- To put the device into Fallback mode (used when reprogramming).
  3. ETHERNET - To connect to a network.
  4. HDMI OUTPUT - To connect to a display device with HDMI inputs.
  5. HDMI INPUTS (3) - To connect sources with HDMI outputs.
  6. ANALOGUE OUTPUT (RCA, variable/fixed level) - To connect to subwoofer or external power amplifier (or pre amplifier when internal volume control is disabled, this will also disable the internal Power amplifier/speaker outputs) with unbalanced (RCA) analogue inputs.
  7. DIGITAL INPUT (Toslink) - To connect sources with Toslink (optical) digital outputs.
  8. DIGITAL INPUT (Spdif) - To connect sources with Spdif (RCA) digital outputs.
  9. ANALOGUE INPUT (line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.
  10. SPEAKER OUTPUTS - To connect to loudspeakers, Neutrik 4 pole connector


Front Panel Connections

SneakyDsmFront.png
  1. Front Slot - contains the IR sensor and the Standby LED


STANDBY LED FUNCTIONS

DIM/OFF

indicates

BRIGHT/ON

indicates

Slow Flash

Fast Flash

Device in standby Device active (will also pulse on IR command received) Searching for IP address (boot) Fallback (reprogramme)


Speaker Wiring

The Sneaky DSM has 4 DAC channels and 4 Power Amplifiers. These amplifiers can be configured in stereo mode or bi-amped mode (via Konfig). All speaker outputs (and Analogue Output) share the same common Volume control.

Connections to the speakers are made via Neutrik Speakon connectors, NL4FX. Neutrik Speakon Assembly Instructions

The stereo mode is best suited to connecting to passive one-way speakers. Power output is 33W/channel (2 x 33).

NeutrikConnector.png
1+ -> Speaker +
1- -> Speaker -
2+ -> Not Connected
2- -> Not Connected


The bi-amped mode is best suited to connecting to passive two-way speakers. Power output is 33W/channel (4 x 33).

NeutrikConnector.png
1+ -> Speaker 1+
1- -> Speaker 1-
2+ -> Speaker 2+
2- -> Speaker 2-


Differences between Sneaky DSM and Sekrit DSM

Check FAQ's


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.


For further assistance, try our customer support pages or the Linn Forum.