Majik DS

From LinnDocs
Revision as of 11:59, 17 August 2022 by Yoda (talk | contribs)
Jump to: navigation, search
MajikDS Silv 3QRight RGB 72DPI.jpg

Product info

  • Product Name: Majik DS (/1) (2008 Variant)
Other variants of this product can be found at Majik DS Variants
  • Date of Introduction: June 2008 - April 2015
  • Upgraded to Majik DS/1 in April 2012 with cosmentic changes
summary of changes: New feet, power switch moved to front lower corner and black facia on black products.
Replaced by Majik DS/2 in April 2015
  • Type: Digital music player

Support

Linn Support Site

Latest software

Latest software releases

Details of latest Product release software

Manuals

Owner's Manual

Product Information Sheet

Controlling the product User Guide

Product setup:Manage Systems user manual

Space Optimisation (Advanced)

Safety Information

Warranty Terms and Conditions

Third Party Software Copyright

Network Setup

Back Panel Connections

Image:Majik_DS_rear.jpg


  1. POWER SWITCH- To switch the power on/off.
  2. MAINS INPUT - To connect to the mains electricity supply.
  3. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  4. ETHERNET - To connect to a network (100Base-T)
  5. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  6. RS232 PORTS - To connect to other Linn devices that don't have ethernet.
  7. SPDIF OUT - To connect to an external DAC or computer that has an Spdif input.
  8. TOSLINK OUT - To connect to an external DAC or computer that has a TOSLINK input.
  9. ANALOGUE AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.


Front Panel Connections

MajikDSFront.png


  1. DISP BUTTON - Changes the front panel display mode.
  2. SKIP BUTTONS - Skips to the previous/next track
  3. STOP BUTTON - Stops playing the current track
  4. PLAY BUTTON - Starts playing the current track
  5. STANDBY BUTTON - Brings the product in/out of standby.
  6. FRONT PANEL DISPLAY


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.


Front display information

Akurate FP display.png

Key points

  • "No Network/LAN" indicates that the Linn DS/DSM/HUB does not have a live computer network connection. This can simply be that the cable is loose or that your computer network/LAN is off/not connected.
  • ! indicates that the Linn DS/DSM/HUB is expecting to see all of the pre-configured Exakt devices, (Exakt speakers, Exakrbox.., Urika-II) connected but it cannot see them. This is typically because the Exakt devices are physically disconnected from the Exakt-link network, they physically have no power going to them or the Linn DS/DSM/HUB has prevously been configured for these products but have not been removed from its setup.

FAQ's

Check:


For further assistance, try our customer support pages