Difference between revisions of "Klimax DS"

From LinnDocs
Jump to: navigation, search
Line 53: Line 53:
  
 
[[Image:KlimaxDS Front low res.jpg|center|700x130px|Image:KlimaxDS_Front_low_res.jpg]]
 
[[Image:KlimaxDS Front low res.jpg|center|700x130px|Image:KlimaxDS_Front_low_res.jpg]]
 +
 +
<br>
  
 
# '''MUTE BUTTON''' - Mutes and un-mutes the volume
 
# '''MUTE BUTTON''' - Mutes and un-mutes the volume

Revision as of 11:13, 30 October 2009

KlimaDS 3Q 02 low res.jpg

Product info

  • Product Name: Klimax DS
  • Date of Introduction:July 2007
  • Type: Reference Digital Stream Player.

Latest software

Latest software releases

Open source software

Manuals

Kinsky Desktop manual

Linn Konfig manual

Production Information Sheet, including Product Specifications

Generic Safety Information

On-line warranty registration

System Setup

Recommended DS Network setup guide


Back Panel Connections

Image:Klimax_DS_rear.jpg


  1. MAINS INPUT - For connection to the mains supply.
  2. POWER SWITCH- For switching the power to the unit on and off
  3. ETHERNET - For connecting the unit to the Internet router.
  4. RS232 PORTS - For connection to Linn source products without ethernet ports.
  5. FALLBACK - Used when reprogramming the unit.
  6. EARTH GROUND - For connecting the earthing lead from the tonearm cable of a turntable, if required. Also for connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  7. UNBALANCED OUT RIGHT, LEFT - Line level analogue outputs for connection to a pre-amplifier.
  8. BALANCED OUT RIGHT, LEFT - Line level analogue outputs for connection to a pre-amplifier.

Front Panel Connections

Image:KlimaxDS_Front_low_res.jpg


  1. MUTE BUTTON - Mutes and un-mutes the volume
  2. FRONT PANEL DISPLAY
  3. STANDBY BUTTON - Brings the unit out of, or puts into, standby
  4. VOLUME -/+ - Adjust the volume level
  5. HEADPHONE SOCKET - Accepts a 3.5 mm headphone jack
  6. AUXILIARY SOURCE SOCKET - For connecting a portable source, e.g. MP3 player. Accepts a 3.5 mm jack.
  7. SOURCE -/+ - Changes Sources

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Klimax DS.
  • Positioning - Please read the information on positioning your Klimax DS.

For further assistance, try our customer support pages or the Linn Forum.