DS Entry Level System

From LinnDocs
Revision as of 13:05, 6 June 2017 by JamieMacB (talk | contribs) (Step 5: Install Linn DS Control Software On Computer)
Jump to: navigation, search

Introduction

This is a recommended guide to setting up an entry level Linn DS system, requiring you to purchase some network components in order to build the recommended system.


Entry5.1.2.png


It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.

Required Components

The following components are required for the system detailed in this page:

  • Internet Service Provider (ISP) router
  • Router
  • Computer
  • Linn DS
  • NAS

Notes:

  1. Ethernet cables are required to connect devices
  2. Router is required to have a WAN port, built in network switch and feature address reservation
  3. NAS is required to have UPnP media server software preinstalled
  4. If a wireless router is being used, 'N' band WAP support is recommended

Step 1: Connect ISP Router to Router

  1. Connect the ISP router to the WAN port on the router
  2. Power on the ISP router
  3. Power on the router


Entry1.1.png


Step 2: Connect Computer To Router

  1. Connect the computer to the router
  2. Power on the computer
  3. Configure the router to issue IP addresses in a suitable range


Entry1.png


The network adapter on the computer should already be configured to ‘obtain an IP address automatically’.

Test Step

  • Test that the computer has internet access
  1. Download Konfig here
  2. Install Konfig onto the computer


Step 3: Connect Linn DS To Router

  1. Connect the Linn DS to the router
  2. Power on the Linn DS.


Entry3.1.2.png


Test Step

  • Test that the Linn DS appears on the network
  1. Open Konfig
  2. Check that the Linn DS is discovered in Konfig


Step 4: Connect NAS To Router

  1. Connect the NAS to the router
  2. Power on the NAS


Entry4.1.2.png


The network adapter on the NAS should already be configured to 'obtain an IP address automatically'.


Step 5: Install Linn DS Control Software On Computer

  1. Download and install Kazoo from here
  2. View the Kazoo manual Kazoo_Manual here

Test Step

  • Test that the Linn DS plays music
  1. Open Kinsky Desktop
  2. Select the Linn DS from Kinsky Desktop to reveal 'Sources'
  3. Select Radio from 'Sources'
  4. Highlight and play any radio station; 'the timer will appear and start to count when the radio station is playing'
  5. To hear music, connect the Linn DS to a hi-fi system


Links to Other Systems

DS Budget System

DS High End System

Networking_Glossary

Network_Components

Multicast_Filtering#Tested_Devices