| Majik DSM / 4
|
| Overview |
| • Product Name:
|
Majik DSM
|
| • Date of Introduction: |
August 2020
|
|
|
| • Type: |
Network music player
with integrated pre/power amp
|
|
| Dimensions |
(H) 100 mm x (W) 350 mm x (D) 350 mm
(H) 3.95 inches x (W) 13.8 inches x (D) 13.8 inches
|
| Weight |
4.1 kg / 9 lb
|
| Mains supply voltage |
(auto ranging)
- 100–120 V AC (±10%) 50–60 Hz
- 200–240 V AC (±10%) 50–60 Hz
|
| Power consumption |
Sleep 15 W
|
| Power continuous |
120W
|
| Ethernet |
100Base-T RJ45
|
| Supported file types |
FLAC, WAV, MP3, AAC, AIFF/AIFC, ALAC, OGG/VORBIS, WMA, DSD (DSF and DFF)
|
| Audio sample rates |
7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24 k,29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k
|
| Word depths |
16–24 bits
|
| Control protocol |
Compatible with UPnP™ media servers, UPnP™ AV 1.0 control points
|
| AKTIV CARD |
Not supported on Majik DSM 2020 variant
- * If Aktiv system is required then the LINE OUT can be connected to MAJIK Power amplifiers & AKURATE Power amplifiers with Aktv cards installed.
- * Majik DSM/4 power amplifier output is ALWAYS full range.
|
| EXAKT |
Not supported on Majik DSM 2020 variant
|
| inputs |
1off Ethernet
|
|
1off Wi-Fi
- Supports IEEE 802.11a/b/g/n/ac PSK/CCMP 1-CH
|
|
1off Bluetooth
- Bluetooth v4.2
- Audio is transferred using SBC encoding
- This is not natively compatible with Google cast.
|
|
1off HDMI ARC (Via HDMI Output)
|
| 4off HDMI 2.0
|
1off configurable input to either LINE or MM Phono,
- Digitizing analogue input stage with ADC Sample rate/resolution: 192kHz/24 bits
- Line-in
- max voltage 4.25Vrms
- Input impedance - 50 kΩ
- MM Phono
- max voltage (1kHz): 67mV RMS. (Gain +40dB),
- Input impedance 47 kΩ, 100pf
- MC Phono
- Not supported on Majik DSM 2020 variant
|
1off Toslink
- Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
|
1off SPDIF (This is disabled if this socket is configured as an Output)
- Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- Nominal input voltage 0.5 V peak
|
1off USB Audio Class 2
- Support sample rates 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
|
| Sources |
LAN
Internet radio
Tidal
Qobuz
Calm Radio
Spotify Connect
NetAux
Roon
|
ANALOGUE AUDIO OUTPUTS
Shares common volume control
|
Line Output:
- 1off RCA:
|
|
|
|
|
|
|
Output Level:
|
2V rms @volume 80
|
|
|
|
|
|
Output Impedance:
|
300Ω
|
|
|
|
|
|
Dynamic Range
|
110dB
|
|
Power Amplifier Output:
- Bridged Class-D amplifier with post-filter feedback
- 2prs of 4mm/Banana/binding post terminals.
|
|
Max output power:
|
|
|
|
|
100W/channel into 4Ω load,
|
|
|
50W / channel into 8Ω load
|
|
|
|
|
|
Dynamic Range
|
106dB
|
|
|
Gain:
|
20dB
|
|
Headphone Output:
- 1off 6.35mm (1/4in) TRS connector:
|
|
|
|
|
|
|
Max Output Level: |
61mW rms into 16Ω
|
|
|
|
83mW rms into 32Ω
|
|
|
|
|
Output Impedance:
|
57Ω
|
|
|
|
|
Dynamic Range
|
115dB
|
|
| DIGITAL OUTPUT
|
SPDIF Output
- 1off SPDIF (Shared with SPDIF output. The connector has to be configured as either an Input or an Output. (Fixed volume Stereo digital output or
- Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
|
