Sekrit DS-I

Product info

• Product Name: Sekrit DS-I

• Date of Introduction: October 2009

• Type: Digital music player

• Features
  • DS Design
  • Dynamik Power Supply
  • Source Unity Gain option

Latest software

Latest software releases

Open source software

Manuals

Product Information

Konfig manual

Kinsky Desktop manual

Remote Control manual

Kinsky Jukebox manual

Safety Information

On-line warranty registration

Network Setup

• DS Budget System Setup
• DS Entry Level System Setup
• DS High End System Setup

Back Panel Connections

1. MAINS INPUT - To connect to the mains electricity supply.
2. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
3. SPEAKER OUTPUTS - To connect to loudspeakers.
4. ANALOGUE OUTPUTS (RCA, variable/fixed level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
5. ANALOGUE INPUTS (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs.
6. RC5 ACCESSORY - To coonect BASIK-3 & BASIK-3IR Room Control units
7. IR OUTPUTS - To connect to infrared flasher devices allowing control of other products that accept infra-red signals.
8. RS232 PORTS - To connect to other Linn devices that don't have ethernet.
9. ETHERNET - To connect to a network.
10. DIGITAL INPUT (Spdif) - To connect sources with Spdif (RCA) digital outputs.
11. DIGITAL INPUT (Toslink) - To connect sources with Toslink (optical) digital outputs.

Front Panel Connections

1. POWER SWITCH - Switches the power on/off
2. FALLBACK BUTTON - To put the device into Fallback mode (used when reprogramming)

LED FUNCTIONS

Text	ON indicates	OFF indicates	Slow Flash / Blink	Fast Flash
STANDBY	Device in standby	Device active	Searching for IP address (boot)	Fallback (reprogramme)
LINK	Ethernet link established	no link established	n/a	n/a
DHCP	DHCP IP address obtained	Default IP address obtained	n/a	n/a
AUDIO	Valid audio (digital inputs only)	n/a	Invalid audio (digital inputs only)	n/a
POWER AMP	Internal amplifier enabled	Internal amplifier disabled	Internal amplifier fault	n/a
RCU	Reserved for future use	Reserved for future use	Reserved for future use	n/a
SEARCH	n/a	n/a	Find me	n/a
TRANSMIT	Reserved for future use	n/a	n/a	n/a

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

• Unpacking - Please read the information on unpacking your Sekrit DS-I.

• Positioning - Please read the information on positioning your Sekrit DS-I.

• Important Information:Protection - The Sekrit DS-I features over-current and over-temperature protection

For further assistance, try our customer support pages or the Linn Forum.