- When you first select this page, it appears to be empty. Give this a few seconds, and it will report any updates with any products linked to your Linn Account.
- Select a relevant product and "UPDATE NOW"
- This will tell the Linn DS/DSM to remotely update the Linn DS/DSM firmware to the requested version.
|
NOTE:
- The Software update procedure is built in the following steps:-
- 1. First step is to DOWNLOAD the software update. During this time, the Linn DS/DSM is fully operational. You can still listen to Music, change volume etc. If you wake up the display, you will see what is downloading. This download can take between 10-30 minutes BEFORE the Linn DS/DSM is updated.
- 2. After the update, the Linn DS/DSM will reboot and install this update. This will typically take between 5-15 minutes. Depending on the product, this will produce a shimming dial, a flashing or lightening flash on the front panel display.
- 3. The final reboot will bring the product back to lift and ready for use.
- We recommend that you do NOT power off the Linn DS/DSM until this is complete. I.e. wake up the display and check that is not download and the the Linn DS/DSM does NOT have a shimmering dial, flashing dot/lightening flash of it display.
|
If you experience any issues, then go to the local network and use the Linn App to load or recover your Linn DS/DSM software.
