Template:Setup:Selekt Edition Sub

This will ONLY work in Stereo configurations. This cannot be used in Surround Playback.

These outputs are to give Stereo music enhancement on the Selekt DSM Edition using the Selekt cartridges for L+R feed and using generic filters for the Sub Output.

Examples

-

In Manage Systems - Output options

This is for use with Stereo playback only. If you have a Selekt cartridge configured for LFE Surround and your Subwoofer has two inputs, you can fed one input from the LFE output and the other Sub-woofer input from the SUBOUT output.

Subwoofer

Options:

* ENABLED to enable these back panel outputs.

* DISABLED to disable these back panel outputs.

Subwoofer Filter

• Enabled SUBOUT L+R set by crossover frequency 60Hz, 80Hz, 120Hz .
• Disabled SUBOUT L+R crossover frequency 1kHz, the LHC/RHC audio is flat.

Subwoofer Crossover Frequency

If Subwoofer filter is enabled:

• 60 Crossover frequency 60Hz
• 80 Crossover frequency 80Hz
• 1200 Crossover frequency 120Hz

Subwoofer Crossover Type

• Bass redirect Audio above the Subwoofer Crossover Frequency frequency is sent to the F+R cartridge(s) and Exakt speakers. (Audio below this frequency is redirected to the SUBOUT outputs.)
• Bass Reinforcement Audio to the F+R cartridge(s) and Exakt speakers is flat response..

Subwoofer Channels

• Mono L+R subwoofer combined into one output.
• Stereo separate LHC and RHC subwoofer outputs

Notes

• Only works with Stereo playback
• Does NOT work with DSD playback