Template:Backpanel:Selekt Edition DSM - one Power Amplifier Cartridge

From LinnDocs
Revision as of 13:26, 2 May 2023 by Yoda (talk | contribs)
Jump to: navigation, search


Selekt DSM with integrated amplifier cartridge

Edition Stereo PA backpanel.png
View Selekt Power Amplifier connection detail
Information of what each connector is and a basic specification of these connectors
Click for more....
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  3. POWER SWITCH - Mains power switch
  4. ETHERNET - To connect to a network (100Base-T)
  5. HDMI ARC - To connect to a TV Audio Return Channel (ARC) connection
  6. USB-B socket - To connect to a PC/MAC for Class 2.0 PCM Asynchronous USB Audio playback 9
  7. TOSLINK DIGITAL INPUTS (Spdif) - To connect sources with Toslink digital outputs.
  8. SPDIF DIGITAL INPUTS/OUTPUT 5 - To connect sources with Spdif (RCA) digital outputs.
  9. ANALOGUE INPUTS (RCAline level)1 & 2 - To connect sources with RCA analogue outputs.
  10. SUB OUT OUTPUTS (RCAline level) - For Stereo Bass Reinforcement or Redirect when used with Selekt Cartridges
  11. ANALOGUE INPUTS (RCA MM/MC)2 & 3 - To connect a turntable with unbalanced (RCA) outputs.
  12. EXAKT LINK- To connect to Exakt compatible devices (Exaktbox, Exakt Speakers, Urika II)
  13. PHONO GROUND - To connect to a turntable grounding terminal.
  14. POWER AMPLIFIER OUTPUTS6 ,7 & 8 - To connect directly to a pair of loudspeakers.


Notes:
1 Analogue inputs: Input range adjustable 1V-4V rms, 10kΩ impedance
2 with ADC of 192kHz/24bit
3 RCA MM/MC:

MM input impedance 47k, 100pf
MM max voltage (1kHz): 67mV rms. (Gain +40dB)
MC input impedance 100Ω 470p
MC max voltage (1kHz): 5.5mV rms (Gain +54dB)

5 Digital inputs: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

SPDIF1 can be converted to an SPDIF output that will support up to 192KHz. This output is a fixed volume control output, that is, Volume Up/Down had no effect on this output.

6 Power Amplifier outputs: These are CLASS-D amplifier outputs and speakers should ONLY be connected/disconnected when the product in is Sleep state or powered OFF.
7 Power Amplifier outputs: Max 100W/4Ω, 50W/8Ω per channel, Gain 20dB

The Selekt power amplfiers have a slightly lower gain than other Linn power amplifiers, (Majik/Akurate..). If you are going to Bi-Amp a pair of speakers then we would recommend either ALL Selekt Power amplifier cartridges or ALL Selekt Line level cartridges with external amplifiers.

8 Some Electrostatic speakers may require a modification to work with Linn Selekt Class-D amplifier. Please refer to the speaker manufacturers website for information.
9 USB Supported Sample rates: 44.1, 48, 88.2, 96, 176.4, 192



Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=Template:Backpanel:Selekt_Edition_DSM_-_one_Power_Amplifier_Cartridge&oldid=27847"