Template:Setup:Kustom DSM:Manage Systems

Kloud Konfig/Manage Systems setup

The <FACTORY DEFAULT> of the Kustom DSM has no Streamers attached to no Zones and will not be attached to your Linn Account:

Linn Account creation and adding/removing Linn DS/DSM from your account

The Linn Account Manage system requires your Linn DS/DSM to be attached to a “Linn Account”. You can do this by using the Kazoo App:

1. Go into the latest version of Kazoo and select Settings
2. Select the Linn Account tab
3. If you do not have a Linn Account then you can instantly register for one.
4. After registration and Log-in you will see the Linn DS players on your network. ADD or REMOVE the Linn DS/DSM players from your Linn account.

Note

Products, such as the Kustom DSM Z4/Z8, will not show in Kazoo room listing as they are not initially configured. But they WILL shown in this product listing and can be added to your account.

Accessing the Linn DS/DSM in your account

After adding the Linn DS/DSM players to your Linn Account:

1. go to www.Linn.co.uk
2. Select the Full Menu (top right) and go down to “My Account”
3. Within the “My Account” select Manage systems.
   1. This will enter you into the System management page and “Edit Settings” or your Linn DS/DSM
   2. If you have just registered and added these to your Account it may take a couple of minutes to show you Linn DS/DSM setup. If nothing changes then try refreshing your web-browser page, (typically function key F5 or CTRL-F5 in the browser).
   3. The Space tab will not appear until you have assigned speakers to your Linn DS/DSM in the “GENERAL” tab.
4. with the speakers setup you will now be able to create/update/delete/rename your Space Optimisation settings created by this application.

Note: If you have any issues logging in to your Linn Account, check your web-browser doesn't have some security/privacy blockers such as "Ghostery, uBlock etc. These "security or Privacy" apps can block the communication is allow login.

Now that your Kustom DSM has been attached to your Linn Account

1.Select you Kustom DSM from the list and under GENERAL Select CONFIGURE This will show, (for a Z8):

---

2.You can then edit which Streamer will feed which Zone. REBOOT after the configuration has been selected to apply changes

---

3. Click on the Arrow at the Kustom DSM to expand/contract the Stream and Zone devices. You can change the names and settings of each Stream and Zone.

NOTE

• DO NOT HAVE THE STREAMER NAME THE SAME AS ANY ZONE NAME. THIS CAN CAUSE ERRATIC OPERATION OF THE CONTROL SOFTWARE (Kazoo, Linn App, Crestron, Control4...)
• After REBOOT, any Streamers that are not connected to any Zones are invisible all control interfaces, (Kazoo, Linn App, Control4 etc)

---