Cartridge/Ekstatik
Linn Ekstatik
Moving coil cartirdge
Ekstatik Cartridge
In order to better Kandid, we needed to look further afield, and at more varied materials. We conducted extensive experiments; auditioning different materials and configurations for the body, inserts, cantilever, suspension, windings and leads. The result is Ekstatik – the new jewel in the crown of the Linn cartridge range.
Note: Ekstatik requires at least 15hrs ‘burn-in’; we’ve found that performance continues to improve and reaches its peak after ~40hrs.
Key Points
• A micro-ridge stylus on a sapphire cantilever makes for an extraordinarily responsive cartridge.
• Featuring aluminium-bronze inserts, to reap the sonic benefits of this alloy.
• Bespoke honeycomb cut into the cartridge body means mass is reduced to our preferred sweet spot of close to 7g.
• Designed to outperform our Kandid MC cartridge.
Mounting
The Ekstatik acrtridge is provided with 2 long and 1 short screws.
- The long screws are only for the outter/side mounting points.
- The short screw is for the rear centre mount
Technical Specifications
|
Introduction: | 2021 |
| Type : | Moving Coil Tracking | |
| Impedance: | 12 Ohms | |
| Recommend capacitance: | 1 nF | |
| Recommended Load: | 100 ohms | |
| Output voltage: | 0.45mV @ 3.54 cm/s | |
| Stylus: | Micro ridge | |
| Cantilever | Sapphire | |
| Wieght: | 7 grams | |
| Crosstalk: | > 28dB | |
| Channel balance at 1kHz: | < 1dB | |
| Tracking force: | 2.0 gram |
