FALLBACK

From LinnDocs
Revision as of 11:13, 13 December 2018 by Yoda (talk | contribs) (Created page with "On the Linn DS/DSM the '''FALLBACK''' button is used as part of the recovery procedure. This FALLBACK button should ONLY be pressed briefly when the Linn DS/DSM is powered on. …")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

On the Linn DS/DSM the FALLBACK button is used as part of the recovery procedure.

This FALLBACK button should ONLY be pressed briefly when the Linn DS/DSM is powered on. This action will start-up the Linn DS/DSM into Software Upload mode with a lightening flash on the front panel display. That is, it is waiting for the Konfig software to transfer the software into it.
To bring the Linn DS/DSM out of the "Software Upload" mode, with lightening flash, all you need to do is power cycle the Linn DS/DSM. That is, switch mains OFF for 10seconds and switch Mains back on.

Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=FALLBACK&oldid=17055"